BIOS laptop

[papapas]

Έχω ένα laptop Toshiba Satellite 200CDT και δεν ξέρω πως μπαίνω στο BIOS! Αν ξέρει κάποιος ας πει γιατί το DEL γιοκ...

 

Επίσης αν γνωρίζει κανείς αν κάνει boot από CD και αν παίζουν καινούργια firmware for BIOS?

[vagpap]

Στο δικό μου (Acer) μπαίνεις με F2.

Boot από cd λογικά θα κάνει (έκαναν από εποχής pentium τα μηχανάκια).

Συνήθως, αν δεν υπάρχει κάποιο major bug δεν βγαίνουν νέα firmwares μιας και η επεκτασιμότητα είναι περιορισμένη.

[HexStatic]

http://www.Toshiba.com

http://www.bios-drivers.com/

[Γιάννης Platano]

Οταν ξεκιναει δεν γραφει με ποιο πληκτρο μπαινει στο BIOS ??? :?: :?:

[papapas]

οχι δεν γράφει και κάνει boot από δισκέττα, και θέλω να περάσω Mandrake και δεν μου αναγνωρίζει την ύπαρξη του cd καθόλου... Any ideas? Ευχαριστώ!!!

[naturas]

To cd tou Mandrake einai original??? eisai sigouros oti einai bootable???

An den sto anagnwrizei pantws prospathise na kaneis boot tou cd tou Mandrake apo disketa...

 

Fantazomai oti tha exeis kai windows....des to cd apo ta windows kai psakse enan fakelo pou leei bootdisk kai rootdisk..an diabaseis to readme sou leei analitika pws tha ftiakseis tis boot disks tou linux...

 

Den kserw poia ekdosi exeis alla sto Mandrake to 9 prepei na ftiakseis mia bootdisk kai 2 rootdisks....

[netcrawler]

Toshiba

 

The methods discussed first in this section are used to run the BIOS Setup routines on Toshiba laptop systems for the following Toshiba models:

 

All Libretto, all Portege, Satellite 100CS, 105CS, 105CT, 110CS, 110CT, 115CS, 115CT, 1555CDS, 200CDS, 205CDS, 2060CDS, 2065CDS, 2065CDT, 2100CDS, 2100CDT, 2105CDS, 2140XCDS, 2180CDT, 2210CDT, 2210XCDS, 2250CDT, 2250XCDS, 225CDS, 2500CDT, 2505CDS, 2505CDT, 2510CDS, 2515CDS, 2530CDS, 2535CDS, 2540CDS, 2545CDS, 2590CDT, 2595CDS, 2595CDT, 2595XDVD, 2615DVD, 2655XDVD, 2675DVD, 2715DVD, 2715XDVD, 2755DVD, 2775XDVD, 300CDS, 305CDS, 305CDT, 310CDS, 310CDT, 315CDS, 315CDT, 320CDS, 320CDT, 325CDS, 325CDT, 330CDS, 330CDT, 335CDS, 335CDT, 4000CDS, 4000CDT, 4005CDS, 4005CDT, 4010CDS, 4010CDT, 4015CDS, 1805-S177, 4015CDT, 4020CDT, 4025CDT, 4030CDT, 4060CDT, 4080CDT, 4080XCDT, 4085XCDT, 1415-S115, 1415-S105, 2410-S204, 1410-S174, 2410-S203, 1410-S173, 1415-S174, 1415-S173, 1405-S172, 1405-S171, 1400-S152, 2400-S252, 2400-S202, 2400-S251, 2400-S201, 1400-S151, 2405-S202, 1405-S152, 2405-S221, 2405-S201, 1405-S151, 4090XDVD, 4100XDVD, 2800-S201, 2805-S201, T2100, T2100CS, T2100CT, T2105CS, T2105CS, T2105CT, T2110CS, T2115CS, T2130CS, T2130CT, T2150CDS, T2150CDT, T2155CDS, 2800-S202, 2805-S301, 2805-S401, 2805-S202, 2805-S302, 2805-S402, 1805-S203, 1805-S253, 1800-S203, 1800-S253, 2805-S503, 2805-S603, 2590CDS, 2590XDVD, 2695DVD, 220CDS, 2545XCDT, 1805-S273, 1805-S204, 1805-S254, 1805-S274, 1800-S204, 1800-S254, 2060CDT, 1800-S206, 1800-S256, 1805-S255, 1805-S154, 1805-S207, 1800-S207, 1800-S274, 1805-S278, 1805-S208, all Satellite Pro, all TE-Series, and all Tecra

 

There are three ways to run the BIOS Setup on these models:

 

*

 

From Windows, using the HWSetup program—The HWSetup program comes preinstalled on these Toshiba models, and it is also contained in the Toshiba Utilities package for these models, which can be downloaded from the Toshiba support Web site. To run HWSetup, open the Control Panel and double-click the HWSetup program. If you change any settings, you may be required to restart the system.

*

 

Starting with the system powered off (not in sleep/suspend or hibernate mode)—Start with the system powered off. Press the power button and then immediately press and hold the Esc key while the system runs the POST (Power On Self Test). When the POST finishes, a prompt will appear telling you to press the F1 key to enter BIOS Setup. At that time, press the F1 key to access the BIOS Setup program.

*

 

From MS-DOS, running the TSETUP program—TSETUP must be run under MS-DOS mode and not in a DOS session under Windows. The TSETUP utility will not work if a memory manager such as HIMEM.SYS, QEMM386, or equivalent is installed. TSETUP comes with the software provided with the system, or it can be downloaded from the Toshiba support Web site.

 

The next method discussed in this section is for the following Toshiba models:

 

Satellite 1605CDS, 1625CDT, 1675CDS, 1695CDT, 1715XCDS, 1735, 1755, 1730, 1750, 3005-S303, 3005-S403, 3000-S353, 3005-S304, 3000-S304, 3000-S307, 3005-S308, 1005-S157, 1000-S157, 1005-S158, 3005-S307, 3000-S309, 1905-S277, 1000-S158, 1200-S121, 1200-S122, 1905-S301, 1955-S801, 1955-S802, 1100-S101, 1905-S302, 1105, 1115-S103, 1905-S303, 1955-S803, 1905-S304, 1955-S804, 1110-S153, and 1115-S104

 

These models use a Phoenix BIOS. To access the BIOS Setup on these systems, the system must be off, and not in sleep/suspend or hibernate mode. Press the power button and then immediately press and hold down the F2 key. When the POST (Power On Self Test) finishes, the BIOS Setup screen will appear.

 

The final method discussed is for the following Toshiba models:

 

Satellite 5005-S504, 5005-S507, 5005-S508, 5105-S607, 5105-S608, 5105-S501, 5105-S701, 5105-S502, 5105-S702, 5105-S901, 5205-S503, 5205-S703, 5205-S504, and 5205-S704

 

These are "legacy-free" models, and they do not incorporate a BIOS Setup program in the motherboard ROM. The only way to run BIOS Setup is using a Windows-based BIOS Setup utility called HWSetup. The HWSetup utility comes preinstalled on these Toshiba models, and it is also contained in the Toshiba Utilities package for these models, which can be downloaded from the Toshiba support Web site. To run HWSetup, open the Control Panel and double-click the HWSetup program. HWSetup provides a graphical front end for modifying BIOS settings. Note that if you change any settings, you may be required to restart the system.

[papapas]

Παιδιά ευχαριστώ για τις απαντήσεις σας ιπου είναι άμεσες! Έχω Mandrake 10 και έφτιαξα boot diskette! Το CD δεν το αναγνωριζει μετά δηλαδή όταν έχω κάνει boot από δισκέττα και ψάχνει για CD, λέει πως δεν βρήκε κανένα CD drive!!!

[netcrawler]

These are "legacy-free" models, and they do not incorporate a BIOS Setup program in the motherboard ROM. The only way to run BIOS Setup is using a Windows-based BIOS Setup utility called HWSetup. The HWSetup utility comes preinstalled on these Toshiba models, and it is also contained in the Toshiba Utilities package for these models, which can be downloaded from the Toshiba support Web site. To run HWSetup, open the Control Panel and double-click the HWSetup program. HWSetup provides a graphical front end for modifying BIOS settings. Note that if you change any settings, you may be required to restart the system.

 

Ψάξε να βρεις το HWsetup για το δικό σου μοντέλο και μόνο τότε θα μπορέσεις να το κάνεις να bootarei απο CD

[papapas]

όπως εία παραπάνω το μοντέλο που λέω εγώ δεν είναι σε αυτά που λες 200CDT!!! Kai i toshiba yiok!!!!