dreaming123 Δημοσ. 6 Ιουλίου 2004 Μέλος Δημοσ. 6 Ιουλίου 2004 Γράφει!!! Αλλά έχω κάτι princo και τα γράφει μόνο σε 2χ ταχύτητα. Οσοι έχετε το ίδιο μοντέλο αν γίνετε πείτε μου αν τα ritek τα γράφει σε 4χ.
Gabriel Δημοσ. 6 Ιουλίου 2004 Δημοσ. 6 Ιουλίου 2004 Αυτό που σου έδωσαν είναι ίδιο με το Liteon 812S που με Firmware μετατρέπεται σε ένα ωραιότατο Liteon 832S (Dual Layer). Princo 4πλή μου τα έγραφε πάντως.
dreaming123 Δημοσ. 6 Ιουλίου 2004 Μέλος Δημοσ. 6 Ιουλίου 2004 Gabriel ευχαριστώ. Αν να δούμε αν είμαι τυχερός
Gabriel Δημοσ. 6 Ιουλίου 2004 Δημοσ. 6 Ιουλίου 2004 http://codeguys.rpc1.org/firmwares.html http://forum.rpc1.org/viewtopic.php?t=26245&highlight=dw18+812 Θα το κάνεις πρώτα 812s και μετά 832s. Πάντα με δική σου ευθύνη!!
vatraxos Δημοσ. 6 Ιουλίου 2004 Δημοσ. 6 Ιουλίου 2004 Check this! 7. I get a 'Power Calibration Error'. Why? Power Calibration is controlled by the recorder. Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). And during the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC). This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times. So, when you receive the "Power Calibration Error" or "Power Calibration Area full" error message, then the cause will be either poor media, poor Power, or a defective Recorder. POSSIBLE SOLUTIONS: 1) A Firmware Update might enable the OPC on this medium 2) Try another brand of CDR or CDRW media. 3) Also try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If this occurs with an External recorder, the power source in the chassis could be the cause. Take the recorder out of the external chassis, and connect it internal, as a test. 4) Try different configurations, such as taking the CDROM to the Primary IDE bus as Slave, and have only the recorder connected to the Secondary IDE bus as Master. 5) Send the recorder in for Service. Από το site του Nero
dreaming123 Δημοσ. 6 Ιουλίου 2004 Μέλος Δημοσ. 6 Ιουλίου 2004 Ευχαριστώ Gabriel και vatraxos(καμιά συγγένεια με μπάγεβιτς?)
vatraxos Δημοσ. 10 Ιουλίου 2004 Δημοσ. 10 Ιουλίου 2004 Νο...καμία!!! Έχω πάντως πρόβλημα όποτε μπαίνω στο κανάλι της ΑΕΚ, όπως και με βατραχανθρώπους (του στύλ, πώς τολμάς να μπαίνεις με αυτό το "τιμημένο(!) nick χωρίς να είσαι ΟΥΚάς!!)
Προτεινόμενες αναρτήσεις
Αρχειοθετημένο
Αυτό το θέμα έχει αρχειοθετηθεί και είναι κλειστό για περαιτέρω απαντήσεις.