leyki Δημοσ. 27 Μαρτίου 2004 Δημοσ. 27 Μαρτίου 2004 yello paidia, exw kapoio problhma me to dvd-rw mou kai kapoia posts pou diabasa gia to antistoixo error den mou elysan to problima opote as ta paroume apo thn arxh... exw ena acer travelmate me dvd-rw toshiba panw, to opoio ksafnika parousiase to eksis problima: xrisimopoiwntas diaforetiko software kathe fora (arxika to nti cd&dvd maker pou edinan apo thn acer kai argotera to nero 6 ) ftanei sto 100% ths eggrafhs kai mou bgazei sto men nti error:could not open file kai sto de NERO to eksis log : === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R6112 G: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 510MB (523248kB) Free physical memory: 16MB (16784kB) Memory in use : 96 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.3.2004 ISO compilation 7:54:38 μμ #1 Text 0 File Isodoc.cpp, Line 6062 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 7:54:38 μμ #2 Text 0 File Reader.cpp, Line 118 Reader running 7:54:38 μμ #3 Text 0 File Writer.cpp, Line 124 Writer TOSHIBA DVD-ROM SD-R6112 running 7:54:38 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3898 First writeable address = 0 (0x00000000) 7:54:38 μμ #5 Text 0 File Burncd.cpp, Line 3198 Turn on Disc-at-once, using DVD media 7:54:38 μμ #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2260863 (502:24.63, 4415MB) 7:54:38 μμ #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 7:54:38 μμ #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: TOSHIBA DVD-ROM SD-R6112, Media type: DVD-R Disc Manufacturer: VANGUA - RD Disc Application Code: 64, Disc Physical Code: 193 7:54:38 μμ #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:54:38 μμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2260864 (2260864) = #2260864/502:24.64 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2260864 blocks [TOSHIBA DVD-ROM SD-R6112] -------------------------------------------------------------- 7:54:43 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [TOSHIBA DVD-ROM SD-R6112] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4630249472, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2260864 | lead-out | 1 | 0x00 | 0x41 7:54:43 μμ #12 Phase 24 File dlgbrnst.cpp, Line 1841 Caching of files started 7:57:24 μμ #13 TRANSFER -15 File ThreadedTransfer.cpp, Line 1811 Cache file too small - not all files could be cached 7:57:26 μμ #14 Text 0 File Burncd.cpp, Line 4214 Cache writing successful. 7:57:26 μμ #15 Phase 25 File dlgbrnst.cpp, Line 1841 Caching of files completed 7:58:26 μμ #16 Phase 36 File dlgbrnst.cpp, Line 1841 Burn process started at 2x (2.760 KB/s) 7:58:27 μμ #17 Text 0 File ThreadedTransferInterface.cpp, Line 2342 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:58:27 μμ #18 Text 0 File dlgbrnst.cpp, Line 1699 Set remaining time: 27:57,317 (1677317ms) -> OK 7:58:27 μμ #19 Text 0 File DVDR.cpp, Line 1619 Recording mode: Sequential Recording Mode 7:58:27 μμ #20 Text 0 File Mmc.cpp, Line 19864 Set BUFE: supported -> ON 7:58:27 μμ #21 Text 0 File DVDR.cpp, Line 1760 Start write address at LBA 0 DVD high compatibility mode: Yes 7:58:27 μμ #22 Text 0 File Cdrdrv.cpp, Line 8002 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 30000 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:55:33 μμ #23 Text 0 File WriterStatus.cpp, Line 115 <TOSHIBA DVD-ROM SD-R6112> start writing Lead-Out at LBA 2260864 (227F80h), lenght 0 blocks 8:55:33 μμ #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:55:34 μμ #25 Text 0 File DVDR.cpp, Line 1970 EndDAO: Last written address was 2260863 8:56:45 μμ #26 Text 0 File dlgbrnst.cpp, Line 1699 Set remaining time: 0:00,000 (0ms) -> OK 8:56:45 μμ #27 Text 0 File dlgbrnst.cpp, Line 1699 Set remaining time: 0:00,000 (0ms) -> OK 8:56:45 μμ #28 Phase 161 File dlgbrnst.cpp, Line 1841 Burn process completed successfully with warnings 8:56:45 μμ #29 Phase 78 File dlgbrnst.cpp, Line 1841 Data verification started 8:58:15 μμ #30 VERIFYERR 10 File UDFCompilationImpl.cpp, Line 1282 Cannot mount the written CD "TOSHIBA DVD-ROM SD-R6112" (H:1, T:0) 8:58:15 μμ #31 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1380 Status summary Total files=0, identical=0, different=0, inaccessible=0, skipped=0. 8:58:15 μμ #32 Phase 81 File dlgbrnst.cpp, Line 1841 Data verification failed Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/8/2002 1:27:50 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) telika to dvd sto telos den to diabazei katholou.. to blepei san blank ki egw trabaw ta mallia mou pou exasa alli mia wra na perimenw mpas kai allaksei kati.. ayto exei ginei 3 fores synexomena kai h marka thn prwti fora htan diaforetikh apo tis 2 epomenes (thn deyterh htan that;s write nomizw ) sorry gia ta paaara polla bytes alla peite mou... na to petaksw? filikA leyki [/b]
leyki Δημοσ. 28 Μαρτίου 2004 Μέλος Δημοσ. 28 Μαρτίου 2004 telika den kserei kaneis ? tha balw ta klammata....! mpas kai kserei kaneis to service tis acer toulaxiston kai ti paizei me aytous ?
jpan Δημοσ. 29 Μαρτίου 2004 Δημοσ. 29 Μαρτίου 2004 Το πρόβλημα πρέπει να στο δημιουργεί η ποιότητα ή και η συμβατότητα των DVD δίσκων με το αντιγραφικό σου, με αποτέλεσμα να μην μπορεί να γίνει σωστά το Lead-out. Επίσης στο Nero πρέπει να επιλέγεις την εγγραφή No Multisession και όχι Start Multisession disc, για να "κλίνει" σωστά το δισκάκι. Τώρα ως προς την ποιότητα που έχουν τα άγραφα δισκάκια, για παράδειγμα τα that's write που χρησιμοποίησες είναι πολύ κακής ποιότητας και για να γραφτούν πρέπει να ρυθμίσεις την ταχύτητα εγγραφής στο 1x. Αντιθέτως τα That's που φτιάχνει η Taiyo Yuden και γενικά οτιδήποτε μέσο που παράγει η εν λόγω εταιρεία είναι κορυφαίας ποιότητας. Αρχικά προσπάθησε να γράψεις ένα DVD-R made by Taiyo Yuden και πες μας τα αποτελέσματα της εγγραφής. Τέτοια δισκάκια έχει το e-shop.gr και θα τα βρεις στην σελίδα http://www.melani.gr
Προτεινόμενες αναρτήσεις
Αρχειοθετημένο
Αυτό το θέμα έχει αρχειοθετηθεί και είναι κλειστό για περαιτέρω απαντήσεις.