Log για boot loop

[orestis000]

Καλησπέρα, Πριν μερικές ώρες το λάπτοπ μου μπήκε ξαφνικά σε boot loop. Έβγαλα τον ssd μου και το λάπτοπ έκανε boot μια χαρά. Πήγα στο μαγαζί που αγόρασα τον ssd και μου είπαν ότι δεν έχει κάποιο πρόβλημα ο δίσκος. Τον βάζω πάλι πάνω και παίζει μια χαρά. Ο τύπος που δούλευε εκεί μου είπε να βρω το log για να δω τι σφάλμα είχε ακριβώς γιατί ο ίδιος δεν ξέρει πως να το βρει στο linux. Πήγα στο var/log αλλά υπάρχουν πολλά αρχεία. Ποιο ανοίγω και τι ψάχνω;

[jim_p]

Εστω οτι ο σκληρος σου ειναι ο /dev/sda. Τρεχεις ενα dmesg στο τερματικο και μεσα στο κατεβατο ψαχνεις να βρεις πληροφοριες για τον /dev/sda.

Για να διευκολυνθεις το

dmesg > arxeio.txt

και μετα απλα ψαχνεις το arxeio.txt που δημιουργηθηκε.

[orestis000]

orestis@orestis-Aspire-5742G:~$ dmesg
[    0.000000] microcode: CPU0 microcode updated early to revision 0x4, date = 2013-06-28
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-38-generic (buildd@lgw01-58) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #57-Ubuntu SMP Tue Sep 6 15:42:33 UTC 2016 (Ubuntu 4.4.0-38.57-generic 4.4.19)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4.0-38-generic root=/dev/mapper/ubuntu--gnome--vg-root ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f680fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009f681000-0x000000009f6befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009f6bf000-0x000000009f735fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009f736000-0x000000009f7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009f7bf000-0x000000009f7dffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009f7e0000-0x000000009f7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009f800000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000157ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Acer Aspire 5742G/Aspire 5742G, BIOS V1.06 09/15/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x158000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 080000000 mask FE0000000 write-back
[    0.000000]   3 base 09F800000 mask FFF800000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 base 140000000 mask FF0000000 write-back
[    0.000000]   6 base 150000000 mask FF8000000 write-back
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33a16000-0x35d02fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x000000009F7FE120 00007C (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009F7FC000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 0x000000009F7EB000 00DD74 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 0x000000009F75A000 000040
[    0.000000] ACPI: FACS 0x000000009F75A000 000040
[    0.000000] ACPI: ASF! 0x000000009F7FD000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: HPET 0x000000009F7FB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 0x000000009F7FA000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 0x000000009F7F9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 0x000000009F7EA000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 0x000000009F7E7000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASPT 0x000000009F7E3000 000034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT 0x000000009F7E2000 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x000000009F7E1000 000259 (v01 PmRef  Cpu0Tst  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x000000009F7E0000 00049F (v01 PmRef  ApTst    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000157ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x157ff8000-0x157ffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000157ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009f680fff]
[    0.000000]   node   0: [mem 0x000000009f6bf000-0x000000009f735fff]
[    0.000000]   node   0: [mem 0x000000009f7bf000-0x000000009f7dffff]
[    0.000000]   node   0: [mem 0x000000009f7ff000-0x000000009f7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000157ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000157ffffff]
[    0.000000] On node 0 totalpages: 1013430
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10141 pages used for memmap
[    0.000000]   DMA32 zone: 648986 pages, LIFO batch:31
[    0.000000]   Normal zone: 5632 pages used for memmap
[    0.000000]   Normal zone: 360448 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f681000-0x9f6befff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f736000-0x9f7befff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f7e0000-0x9f7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f800000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff880157c00000 s98008 r8192 d28968 u262144
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 997572
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-38-generic root=/dev/mapper/ubuntu--gnome--vg-root ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3868532K/4053720K available (8404K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 185188K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2393.801 MHz processor
[    0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.60 BogoMIPS (lpj=9575204)
[    0.000040] pid_max: default: 32768 minimum: 301
[    0.000047] ACPI: Core revision 20150930
[    0.015684] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.015711] Security Framework initialized
[    0.015713] Yama: becoming mindful.
[    0.015732] AppArmor: AppArmor initialized
[    0.016050] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.017269] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.017842] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.017848] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.018119] Initializing cgroup subsys io
[    0.018124] Initializing cgroup subsys memory
[    0.018133] Initializing cgroup subsys devices
[    0.018136] Initializing cgroup subsys freezer
[    0.018138] Initializing cgroup subsys net_cls
[    0.018141] Initializing cgroup subsys perf_event
[    0.018143] Initializing cgroup subsys net_prio
[    0.018148] Initializing cgroup subsys hugetlb
[    0.018150] Initializing cgroup subsys pids
[    0.018172] CPU: Physical Processor ID: 0
[    0.018173] CPU: Processor Core ID: 0
[    0.018179] mce: CPU supports 9 MCE banks
[    0.018191] CPU0: Thermal monitoring enabled (TM1)
[    0.018199] process: using mwait in idle threads
[    0.018202] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.018204] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.018561] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[    0.185408] ftrace: allocating 32006 entries in 126 pages
[    0.201523] smpboot: Max logical packages: 4
[    0.201528] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.202031] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.347379] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x5)
[    0.347401] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.347420] core: CPUID marked event: 'bus cycles' unavailable
[    0.347425] ... version:                3
[    0.347426] ... bit width:              48
[    0.347427] ... generic registers:      4
[    0.347428] ... value mask:             0000ffffffffffff
[    0.347429] ... max period:             000000007fffffff
[    0.347430] ... fixed-purpose events:   3
[    0.347431] ... event mask:             000000070000000f
[    0.348338] x86: Booting SMP configuration:
[    0.348340] .... node  #0, CPUs:      #1
[    0.350925] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.351037]  #2
[    0.351573] microcode: CPU2 microcode updated early to revision 0x4, date = 2013-06-28
[    0.353778]  #3
[    0.356021] x86: Booted up 1 node, 4 CPUs
[    0.356027] smpboot: Total of 4 processors activated (19150.40 BogoMIPS)
[    0.358576] devtmpfs: initialized
[    0.361110] evm: security.selinux
[    0.361111] evm: security.SMACK64
[    0.361112] evm: security.SMACK64EXEC
[    0.361113] evm: security.SMACK64TRANSMUTE
[    0.361114] evm: security.SMACK64MMAP
[    0.361115] evm: security.ima
[    0.361116] evm: security.capability
[    0.361191] PM: Registering ACPI NVS region [mem 0x9f736000-0x9f7befff] (561152 bytes)
[    0.361286] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.361381] pinctrl core: initialized pinctrl subsystem
[    0.361512] RTC time: 18:10:56, date: 09/20/16
[    0.361635] NET: Registered protocol family 16
[    0.371393] cpuidle: using governor ladder
[    0.383389] cpuidle: using governor menu
[    0.383398] PCCT header not found.
[    0.383489] Simple Boot Flag at 0x44 set to 0x1
[    0.383519] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.383520] ACPI: bus type PCI registered
[    0.383523] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.383601] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.383604] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.383617] PCI: Using configuration type 1 for base access
[    0.383820] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.383821] mtrr: probably your BIOS does not setup all CPUs.
[    0.383822] mtrr: corrected configuration.
[    0.395822] ACPI: Added _OSI(Module Device)
[    0.395824] ACPI: Added _OSI(Processor Device)
[    0.395826] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.395827] ACPI: Added _OSI(Processor Aggregator Device)
[    0.399369] ACPI: Executed 1 blocks of module-level executable AML code
[    0.402683] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.403151] ACPI: Dynamic OEM Table Load:
[    0.403159] ACPI: SSDT 0xFFFF880152B52800 000432 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.403766] ACPI: Dynamic OEM Table Load:
[    0.403773] ACPI: SSDT 0xFFFF880152BB2000 000891 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.404677] ACPI: Dynamic OEM Table Load:
[    0.404682] ACPI: SSDT 0xFFFF880152B6A400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.405273] ACPI: Dynamic OEM Table Load:
[    0.405278] ACPI: SSDT 0xFFFF880152B5BA00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.406303] ACPI : EC: EC started
[    0.411494] ACPI: Interpreter enabled
[    0.411505] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.411511] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.411534] ACPI: (supports S0 S3 S4 S5)
[    0.411535] ACPI: Using IOAPIC for interrupt routing
[    0.411570] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.823771] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.823779] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.823814] \_SB_.PCI0:_OSC invalid UUID
[    0.823815] _OSC request data:1 1f 0 
[    0.823819] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.824395] PCI host bridge to bus 0000:00
[    0.824398] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.824400] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.824402] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.824404] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfebfffff window]
[    0.824406] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.824415] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.824440] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.824559] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    0.824596] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.824749] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.824793] pci 0000:00:16.0: reg 0x10: [mem 0xb7106100-0xb710610f 64bit]
[    0.824874] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.825015] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.825411] pci 0000:00:1a.0: reg 0x10: [mem 0xb7105c00-0xb7105fff]
[    0.827616] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.827758] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.827797] pci 0000:00:1b.0: reg 0x10: [mem 0xb7100000-0xb7103fff 64bit]
[    0.827889] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.827989] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.828035] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.828135] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.828231] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.828276] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.828376] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.828520] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.828904] pci 0000:00:1d.0: reg 0x10: [mem 0xb7105800-0xb7105bff]
[    0.831099] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.831207] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.831252] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.831410] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.831454] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    0.831684] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[    0.831721] pci 0000:00:1f.2: reg 0x10: [io  0x4048-0x404f]
[    0.831732] pci 0000:00:1f.2: reg 0x14: [io  0x4054-0x4057]
[    0.831743] pci 0000:00:1f.2: reg 0x18: [io  0x4040-0x4047]
[    0.831755] pci 0000:00:1f.2: reg 0x1c: [io  0x4050-0x4053]
[    0.831765] pci 0000:00:1f.2: reg 0x20: [io  0x4020-0x403f]
[    0.831777] pci 0000:00:1f.2: reg 0x24: [mem 0xb7105000-0xb71057ff]
[    0.831826] pci 0000:00:1f.2: PME# supported from D3hot
[    0.831950] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.831975] pci 0000:00:1f.3: reg 0x10: [mem 0xb7106000-0xb71060ff 64bit]
[    0.832006] pci 0000:00:1f.3: reg 0x20: [io  0x4000-0x401f]
[    0.832207] pci 0000:01:00.0: [10de:0df1] type 00 class 0x030000
[    0.832228] pci 0000:01:00.0: reg 0x10: [mem 0xb2000000-0xb2ffffff]
[    0.832238] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.832248] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[    0.832255] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.832262] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.832383] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[    0.832402] pci 0000:01:00.1: reg 0x10: [mem 0xb3000000-0xb3003fff]
[    0.832519] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.832522] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.832525] pci 0000:00:01.0:   bridge window [mem 0xb2000000-0xb30fffff]
[    0.832528] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[    0.832642] pci 0000:02:00.0: [14e4:1692] type 00 class 0x020000
[    0.832727] pci 0000:02:00.0: reg 0x10: [mem 0xb6100000-0xb610ffff 64bit]
[    0.832943] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.839475] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.839485] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.839494] pci 0000:00:1c.0:   bridge window [mem 0xb6100000-0xb70fffff]
[    0.839508] pci 0000:00:1c.0:   bridge window [mem 0xb3100000-0xb40fffff 64bit pref]
[    0.839589] pci 0000:03:00.0: [168c:002e] type 00 class 0x028000
[    0.839645] pci 0000:03:00.0: reg 0x10: [mem 0xb5100000-0xb510ffff 64bit]
[    0.839790] pci 0000:03:00.0: supports D1
[    0.839792] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.847442] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.847452] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.847461] pci 0000:00:1c.1:   bridge window [mem 0xb5100000-0xb60fffff]
[    0.847474] pci 0000:00:1c.1:   bridge window [mem 0xb4100000-0xb50fffff 64bit pref]
[    0.847570] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.847583] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.847585] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.847587] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.847589] pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfebfffff window] (subtractive decode)
[    1.052074] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.052130] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.052182] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.052235] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.052288] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.052341] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.052393] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.052446] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.052467] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    1.052471] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.052475] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.052531] PCI host bridge to bus 0000:ff
[    1.052533] pci_bus 0000:ff: root bus resource [bus ff]
[    1.052539] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    1.052589] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    1.052645] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    1.052693] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    1.052741] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    1.052788] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    1.052895] ACPI: Enabled 5 GPEs in block 00 to 3F
[    1.052963] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.053086] vgaarb: setting as boot device: PCI:0000:01:00.0
[    1.053089] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.053091] vgaarb: loaded
[    1.053092] vgaarb: bridge control possible 0000:01:00.0
[    1.053340] SCSI subsystem initialized
[    1.053396] libata version 3.00 loaded.
[    1.053420] ACPI: bus type USB registered
[    1.053438] usbcore: registered new interface driver usbfs
[    1.053447] usbcore: registered new interface driver hub
[    1.053467] usbcore: registered new device driver usb
[    1.053616] PCI: Using ACPI for IRQ routing
[    1.063469] PCI: pci_cache_line_size set to 64 bytes
[    1.063559] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    1.063562] e820: reserve RAM buffer [mem 0x9f681000-0x9fffffff]
[    1.063563] e820: reserve RAM buffer [mem 0x9f736000-0x9fffffff]
[    1.063565] e820: reserve RAM buffer [mem 0x9f7e0000-0x9fffffff]
[    1.063566] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
[    1.063696] NetLabel: Initializing
[    1.063698] NetLabel:  domain hash size = 128
[    1.063698] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.063713] NetLabel:  unlabeled traffic allowed by default
[    1.063805] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.063810] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.065823] amd_nb: Cannot enumerate AMD northbridges
[    1.065843] clocksource: Switched to clocksource hpet
[    1.072893] AppArmor: AppArmor Filesystem Enabled
[    1.072982] pnp: PnP ACPI init
[    1.274009] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io  0x1000-0x1fff]
[    1.274065] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.274067] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    1.274069] system 00:00: [io  0x0800-0x080f] has been reserved
[    1.274071] system 00:00: [io  0xffff] has been reserved
[    1.274073] system 00:00: [io  0xffff] has been reserved
[    1.274076] system 00:00: [io  0x0400-0x047f] could not be reserved
[    1.274078] system 00:00: [io  0x0500-0x057f] has been reserved
[    1.274083] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.274116] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.274159] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.274220] pnp 00:03: Plug and Play ACPI device, IDs SYN1b16 SYN1b00 SYN0002 PNP0f13 (active)
[    1.274509] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.274512] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.274514] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.274516] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.274518] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    1.274520] system 00:04: [mem 0xb7200000-0xb7200fff] has been reserved
[    1.274522] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.274524] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.274526] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    1.274528] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.274532] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.274651] pnp: PnP ACPI: found 5 devices
[    1.281895] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.281905] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    1.281945] pci 0000:01:00.0: BAR 6: assigned [mem 0xb3080000-0xb30fffff pref]
[    1.281949] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.281951] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    1.281955] pci 0000:00:01.0:   bridge window [mem 0xb2000000-0xb30fffff]
[    1.281957] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[    1.281961] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.281964] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.281971] pci 0000:00:1c.0:   bridge window [mem 0xb6100000-0xb70fffff]
[    1.281975] pci 0000:00:1c.0:   bridge window [mem 0xb3100000-0xb40fffff 64bit pref]
[    1.281983] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.281986] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    1.281992] pci 0000:00:1c.1:   bridge window [mem 0xb5100000-0xb60fffff]
[    1.281997] pci 0000:00:1c.1:   bridge window [mem 0xb4100000-0xb50fffff 64bit pref]
[    1.282004] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    1.282020] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.282022] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.282024] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.282025] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfebfffff window]
[    1.282027] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.282029] pci_bus 0000:01: resource 1 [mem 0xb2000000-0xb30fffff]
[    1.282031] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[    1.282033] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.282035] pci_bus 0000:02: resource 1 [mem 0xb6100000-0xb70fffff]
[    1.282036] pci_bus 0000:02: resource 2 [mem 0xb3100000-0xb40fffff 64bit pref]
[    1.282038] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    1.282040] pci_bus 0000:03: resource 1 [mem 0xb5100000-0xb60fffff]
[    1.282042] pci_bus 0000:03: resource 2 [mem 0xb4100000-0xb50fffff 64bit pref]
[    1.282044] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    1.282046] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    1.282048] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.282050] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfebfffff window]
[    1.282087] NET: Registered protocol family 2
[    1.282283] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.282385] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.282525] TCP: Hash tables configured (established 32768 bind 32768)
[    1.282560] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.282580] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.282648] NET: Registered protocol family 1
[    1.314035] pci 0000:01:00.0: Video device with shadowed ROM
[    1.314091] PCI: CLS 64 bytes, default 64
[    1.314155] Trying to unpack rootfs image as initramfs...
[    1.946615] Freeing initrd memory: 35764K (ffff880033a16000 - ffff880035d03000)
[    1.946659] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.946661] software IO TLB [mem 0x9b681000-0x9f681000] (64MB) mapped at [ffff88009b681000-ffff88009f680fff]
[    1.946897] Scanning for low memory corruption every 60 seconds
[    1.947381] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.947445] audit: initializing netlink subsys (disabled)
[    1.947467] audit: type=2000 audit(1474395056.676:1): initialized
[    1.947864] Initialise system trusted keyring
[    1.947996] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.949616] zbud: loaded
[    1.949834] VFS: Disk quotas dquot_6.6.0
[    1.949874] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.950185] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.950465] fuse init (API version 7.23)
[    1.950634] Key type big_key registered
[    1.950661] Allocating IMA MOK and blacklist keyrings.
[    1.951146] Key type asymmetric registered
[    1.951149] Asymmetric key parser 'x509' registered
[    1.951189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.951230] io scheduler noop registered
[    1.951233] io scheduler deadline registered (default)
[    1.951267] io scheduler cfq registered
[    1.951828] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.951835] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.951872] intel_idle: MWAIT substates: 0x1120
[    1.951874] intel_idle: v0.4.1 model 0x25
[    1.951875] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.454090] ACPI: AC Adapter [AC] (off-line)
[    2.454172] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/PNP0C0C:00/input/input0
[    2.454177] ACPI: Power Button [PWRB]
[    2.454219] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/PNP0C0D:00/input/input1
[    2.454245] ACPI: Lid Switch [LID0]
[    2.454285] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/PNP0C0E:00/input/input2
[    2.454287] ACPI: Sleep Button [SLPB]
[    2.454329] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.454332] ACPI: Power Button [PWRF]
[    2.456715] GHES: HEST is not enabled!
[    2.457003] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.946119] tsc: Refined TSC clocksource calibration: 2393.999 MHz
[    2.946127] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns
[    3.946320] clocksource: Switched to clocksource tsc
[    4.010225] ACPI: Battery Slot [BAT0] (battery present)
[    4.010609] Linux agpgart interface v0.103
[    4.014463] brd: module loaded
[    4.015945] loop: module loaded
[    4.016184] libphy: Fixed MDIO Bus: probed
[    4.016187] tun: Universal TUN/TAP device driver, 1.6
[    4.016189] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    4.016258] PPP generic driver version 2.4.2
[    4.016352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.016357] ehci-pci: EHCI PCI platform driver
[    4.016521] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    4.016529] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.016544] ehci-pci 0000:00:1a.0: debug port 2
[    4.020468] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    4.020484] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb7105c00
[    4.030108] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.030206] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.030208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.030210] usb usb1: Product: EHCI Host Controller
[    4.030211] usb usb1: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[    4.030213] usb usb1: SerialNumber: 0000:00:1a.0
[    4.030609] hub 1-0:1.0: USB hub found
[    4.030620] hub 1-0:1.0: 2 ports detected
[    4.030827] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    4.030833] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.030847] ehci-pci 0000:00:1d.0: debug port 2
[    4.034749] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    4.034759] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb7105800
[    4.046162] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.046259] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.046265] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.046269] usb usb2: Product: EHCI Host Controller
[    4.046273] usb usb2: Manufacturer: Linux 4.4.0-38-generic ehci_hcd
[    4.046278] usb usb2: SerialNumber: 0000:00:1d.0
[    4.046662] hub 2-0:1.0: USB hub found
[    4.046677] hub 2-0:1.0: 2 ports detected
[    4.046778] ehci-platform: EHCI generic platform driver
[    4.046795] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.046800] ohci-pci: OHCI PCI platform driver
[    4.046811] ohci-platform: OHCI generic platform driver
[    4.046819] uhci_hcd: USB Universal Host Controller Interface driver
[    4.046885] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    4.060868] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.060873] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.061265] mousedev: PS/2 mouse device common for all mice
[    4.062744] rtc_cmos 00:01: RTC can wake from S4
[    4.063045] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    4.063090] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    4.063115] i2c /dev entries driver
[    4.063214] device-mapper: uevent: version 1.0.3
[    4.063493] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
[    4.063549] ledtrig-cpu: registered to indicate activity on CPUs
[    4.064434] NET: Registered protocol family 10
[    4.064651] NET: Registered protocol family 17
[    4.064665] Key type dns_resolver registered
[    4.064911] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
[    4.064933] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
[    4.064941] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
[    4.064950] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
[    4.065004] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba
[    4.065254] registered taskstats version 1
[    4.065270] Loading compiled-in X.509 certificates
[    4.066318] Loaded X.509 cert 'Build time autogenerated kernel key: 8b9fe5db9540517005e475afed63f7a6645227d6'
[    4.066342] zswap: loaded using pool lzo/zbud
[    4.068864] Key type trusted registered
[    4.075784] Key type encrypted registered
[    4.075802] AppArmor: AppArmor sha1 policy hashing enabled
[    4.075813] ima: No TPM chip found, activating TPM-bypass!
[    4.075868] evm: HMAC attrs: 0x1
[    4.076616]   Magic number: 0:49:191
[    4.076624]   hash matches /build/linux-R0TiM8/linux-4.4.0/drivers/base/power/main.c:1065
[    4.076712] acpi device:1d: hash matches
[    4.076813] rtc_cmos 00:01: setting system clock to 2016-09-20 18:11:00 UTC (1474395060)
[    4.078301] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.078302] EDD information not available.
[    4.078381] PM: Hibernation image not present or could not be loaded.
[    4.079980] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    4.079982] Write protecting the kernel read-only data: 14336k
[    4.080128] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    4.082291] Freeing unused kernel memory: 1824K (ffff880001838000 - ffff880001a00000)
[    4.082742] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[    4.095120] random: systemd-udevd: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
[    4.095205] random: systemd-udevd: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
[    4.095219] random: systemd-udevd: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
[    4.095236] random: systemd-udevd: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
[    4.095788] random: udevadm: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
[    4.095846] random: udevadm: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
[    4.096136] random: udevadm: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
[    4.096200] random: udevadm: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
[    4.096261] random: udevadm: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
[    4.096326] random: udevadm: uninitialized urandom read (16 bytes read, 16 bits of entropy available)
[    4.342197] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.358212] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    4.474891] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    4.474897] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.475258] hub 1-1:1.0: USB hub found
[    4.475372] hub 1-1:1.0: 6 ports detected
[    4.490924] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    4.490929] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.491433] hub 2-1:1.0: USB hub found
[    4.491620] hub 2-1:1.0: 8 ports detected
[    4.631766] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[    4.631916] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    4.746227] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    4.872417] usb 1-1.1: New USB device found, idVendor=064e, idProduct=a219
[    4.872425] usb 1-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    4.872430] usb 1-1.1: Product: 1.3M WebCam
[    4.872434] usb 1-1.1: Manufacturer: Suyin
[    4.872439] usb 1-1.1: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
[    4.942352] acpi device:0d: registered as cooling_device4
[    4.942435] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input6
[    5.762495] pps_core: LinuxPPS API ver. 1 registered
[    5.762499] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    5.764821] PTP clock support registered
[    5.768834] ahci 0000:00:1f.2: version 3.0
[    5.769099] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    5.769140] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    5.769145] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    5.770482] tg3.c:v3.137 (May 11, 2014)
[    5.774822] scsi host0: ahci
[    5.775009] scsi host1: ahci
[    5.775173] scsi host2: ahci
[    5.775442] scsi host3: ahci
[    5.775500] ata1: SATA max UDMA/133 abar m2048@0xb7105000 port 0xb7105100 irq 25
[    5.775503] ata2: SATA max UDMA/133 abar m2048@0xb7105000 port 0xb7105180 irq 25
[    5.775505] ata3: DUMMY
[    5.775506] ata4: DUMMY
[    5.792483] libphy: tg3 mdio bus: probed
[    5.864991] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 1c:75:08:13:3d:c8
[    5.864996] tg3 0000:02:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
[    5.865000] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    5.865004] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    5.866116] tg3 0000:02:00.0 enp2s0: renamed from eth0
[    6.094358] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    6.094695] ata1.00: supports DRM functions and may not be fully accessible
[    6.095001] ata1.00: READ LOG DMA EXT failed, trying unqueued
[    6.095121] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    6.095126] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
[    6.095130] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    6.095889] ata1.00: supports DRM functions and may not be fully accessible
[    6.096087] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    6.096272] ata1.00: configured for UDMA/133
[    6.096624] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[    6.097102] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    6.097183] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.097201] sd 0:0:0:0: [sda] Write Protect is off
[    6.097206] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.097234] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.098034]  sda: sda1 sda2 < sda5 >
[    6.098353] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.414404] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.426687] ata2.00: ATAPI: PIONEER DVD-RW DVRTD10RS, 1.00, max UDMA/100
[    6.439655] ata2.00: configured for UDMA/100
[    6.446773] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW DVRTD10RS 1.00 PQ: 0 ANSI: 5
[    6.471137] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.471142] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.471450] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    6.471555] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    6.750613] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086]
[    6.860333] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 570026
[    6.928755] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   12.589550] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   12.704021] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   12.704167] systemd[1]: Detected architecture x86-64.
[   12.704338] systemd[1]: Set hostname to <orestis-Aspire-5742G>.
[   12.828562] systemd[1]: Listening on LVM2 metadata daemon socket.
[   12.828721] systemd[1]: Created slice User and Session Slice.
[   12.828753] systemd[1]: Listening on fsck to fsckd communication Socket.
[   12.828783] systemd[1]: Listening on Syslog Socket.
[   12.828809] systemd[1]: Listening on LVM2 poll daemon socket.
[   12.828947] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   12.829023] systemd[1]: Listening on Journal Audit Socket.
[   12.829066] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   12.829109] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   12.829121] systemd[1]: Reached target User and Group Name Lookups.
[   12.829129] systemd[1]: Reached target Remote File Systems (Pre).
[   12.829137] systemd[1]: Reached target Remote File Systems.
[   12.829176] systemd[1]: Listening on udev Control Socket.
[   12.829202] systemd[1]: Listening on udev Kernel Socket.
[   12.829232] systemd[1]: Listening on Journal Socket (/dev/log).
[   12.829270] systemd[1]: Listening on Journal Socket.
[   12.829358] systemd[1]: Created slice System Slice.
[   12.829377] systemd[1]: Reached target Slices.
[   12.843002] systemd[1]: Starting LSB: option to manually manipulate the IPsec SA/SP database...
[   12.843546] systemd[1]: Mounting Debug File System...
[   12.844166] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   12.845286] systemd[1]: Started Braille Device Support.
[   12.846899] systemd[1]: Starting Journal Service...
[   12.847105] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   12.847869] systemd[1]: Mounting POSIX Message Queue File System...
[   12.854853] systemd[1]: Starting Load Kernel Modules...
[   12.855639] systemd[1]: Mounting Huge Pages File System...
[   12.855693] systemd[1]: Reached target Encrypted Volumes.
[   12.856518] systemd[1]: Starting Uncomplicated firewall...
[   12.857288] systemd[1]: Started Read required files in advance.
[   12.858130] systemd[1]: Starting Set console keymap...
[   12.858246] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   12.859116] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   12.862466] systemd[1]: Started LSB: option to manually manipulate the IPsec SA/SP database.
[   12.867419] systemd[1]: Mounted POSIX Message Queue File System.
[   12.867479] systemd[1]: Mounted Debug File System.
[   12.867505] systemd[1]: Mounted Huge Pages File System.
[   12.868505] systemd[1]: Started Uncomplicated firewall.
[   12.871548] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   12.881064] lp: driver loaded but no devices found
[   12.884849] ppdev: user-space parallel port driver
[   12.889726] systemd[1]: Started Load Kernel Modules.
[   12.919238] systemd[1]: Started Journal Service.
[   13.067444] random: nonblocking pool is initialized
[   13.121095] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   13.138809] systemd-journald[279]: Received request to flush runtime journal from PID 1
[   14.341542] wmi: Mapper loaded
[   14.350454] acer_wmi: Acer Laptop ACPI-WMI Extras
[   14.350473] acer_wmi: Function bitmap for Communication Button: 0x1
[   14.351051] input: Acer WMI hotkeys as /devices/virtual/input/input8
[   14.351328] input: Acer BMA150 accelerometer as /devices/virtual/input/input9
[   14.866275] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[   14.866286] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.866291] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   14.866295] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.866297] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   14.866301] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB_.PCI0.GPIO) (20150930/utaddress-254)
[   14.866306] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.866307] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   14.866311] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB_.PCI0.GPIO) (20150930/utaddress-254)
[   14.866316] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.866317] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.871106] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.918890] [drm] Initialized drm 1.1.0 20060810
[   14.998715] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   15.030575] snd_hda_intel 0000:01:00.1: Disabling MSI
[   15.030584] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   15.049884] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   15.049888] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.049891] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   15.049892] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   15.049894] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   15.049896] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   15.049898] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   15.057645] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.057719] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   15.065891] ath: phy0: ASPM enabled: 0x43
[   15.065894] ath: EEPROM regdomain: 0x65
[   15.065895] ath: EEPROM indicates we should expect a direct regpair map
[   15.065897] ath: Country alpha2 being used: 00
[   15.065898] ath: Regpair used: 0x65
[   15.074253] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.074795] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc900007a0000, irq=17
[   15.087926] nvidia: module license 'NVIDIA' taints kernel.
[   15.087928] Disabling lock debugging due to kernel taint
[   15.096042] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   15.105525] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   15.105719] nvidia-nvlink: Nvlink Core is being initialized, major device number 245
[   15.105904] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[   15.105910] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  361.42  Tue Mar 22 18:10:58 PDT 2016
[   15.159667] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   15.210785] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  361.42  Tue Mar 22 17:29:54 PDT 2016
[   15.212560] cfg80211: World regulatory domain updated:
[   15.212565] cfg80211:  DFS Master region: unset
[   15.212567] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   15.212569] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.212571] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.212573] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   15.212575] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   15.212577] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   15.212579] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   15.212580] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   15.212582] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   15.231263] nvidia-uvm: Loaded the UVM driver in lite mode, major device number 244
[   15.243499] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   15.243559] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   15.243612] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   15.243657] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   15.243687] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   15.243768] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   15.243798] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   15.724260] Adding 4050940k swap on /dev/mapper/ubuntu--gnome--vg-swap_1.  Priority:-1 extents:1 across:4050940k SSFS
[   15.879678] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   15.879768] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   15.879842] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   15.879911] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   16.417614] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   16.419602] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   16.480094] media: Linux media interface: v0.10
[   16.498807] Linux video capture interface: v2.00
[   16.564445] audit: type=1400 audit(1474395072.984:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=840 comm="apparmor_parser"
[   16.567216] audit: type=1400 audit(1474395072.988:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=843 comm="apparmor_parser"
[   16.568772] audit: type=1400 audit(1474395072.988:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=837 comm="apparmor_parser"
[   16.568783] audit: type=1400 audit(1474395072.988:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=837 comm="apparmor_parser"
[   16.568792] audit: type=1400 audit(1474395072.988:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=837 comm="apparmor_parser"
[   16.568800] audit: type=1400 audit(1474395072.988:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=837 comm="apparmor_parser"
[   16.571053] audit: type=1400 audit(1474395072.988:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=845 comm="apparmor_parser"
[   16.573007] audit: type=1400 audit(1474395072.992:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=842 comm="apparmor_parser"
[   16.573020] audit: type=1400 audit(1474395072.992:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=842 comm="apparmor_parser"
[   16.573029] audit: type=1400 audit(1474395072.992:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=842 comm="apparmor_parser"
[   16.644266] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
[   16.655121] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input16
[   16.656168] usbcore: registered new interface driver uvcvideo
[   16.656173] USB Video Class driver (1.1.1)
[   17.674760] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   17.693420] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   17.698594] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   17.709717] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   17.832975] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   17.864408] tg3 0000:02:00.0 enp2s0: Link is down
[   18.741802] wlp3s0: authenticate with c4:27:95:8a:6f:86
[   18.758795] wlp3s0: send auth to c4:27:95:8a:6f:86 (try 1/3)
[   18.808843] wlp3s0: authenticated
[   18.811479] wlp3s0: associate with c4:27:95:8a:6f:86 (try 1/3)
[   18.819642] wlp3s0: RX AssocResp from c4:27:95:8a:6f:86 (capab=0x1411 status=0 aid=2)
[   18.819747] wlp3s0: associated
[   18.819784] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   23.641039] vboxdrv: Found 4 processor cores
[   23.659993] vboxdrv: TSC mode is Invariant, tentative frequency 2394001137 Hz
[   23.659998] vboxdrv: Successfully loaded version 5.0.24_Ubuntu (interface 0x00240000)
[   23.666023] VBoxNetFlt: Successfully started.
[   23.670797] VBoxNetAdp: Successfully started.
[   23.677365] VBoxPciLinuxInit
[   23.681194] vboxpci: IOMMU not found (not registered)
[   23.991192] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   23.991250] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   23.991303] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   23.991349] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   23.991379] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   23.991461] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   23.991491] ACPI Warning: \_SB_.PCI0.P0P2.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   24.179682] nvidia-modeset: Allocated GPU:0 (GPU-575befd5-4369-7f40-46c5-025e3ec27e47) @ PCI:0000:01:00.0
[   44.900235] Non-volatile memory driver v1.3
[   95.925320] wlp3s0: deauthenticating from c4:27:95:8a:6f:86 by local choice (Reason: 3=DEAUTH_LEAVING)
[   96.004140] cfg80211: World regulatory domain updated:
[   96.004146] cfg80211:  DFS Master region: unset
[   96.004148] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   96.004152] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   96.004155] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   96.004157] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   96.004160] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   96.004164] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   96.004167] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   96.004169] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   96.004172] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   99.476971] PM: Syncing filesystems ... done.
[   99.543049] PM: Preparing system for sleep (mem)
[  101.627569] Freezing user space processes ... (elapsed 0.002 seconds) done.
[  101.629804] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  101.631092] PM: Suspending system (mem)
[  101.631152] Suspending console(s) (use no_console_suspend to debug)
[  101.631459] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  101.632980] sd 0:0:0:0: [sda] Stopping disk
[  103.206946] PM: suspend of devices complete after 1575.482 msecs
[  103.207430] PM: late suspend of devices complete after 0.480 msecs
[  103.208219] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[  103.222402] PM: noirq suspend of devices complete after 14.968 msecs
[  103.222533] ACPI: Preparing to enter system sleep state S3
[  103.246267] ACPI : EC: EC stopped
[  103.246268] PM: Saving platform NVS memory
[  103.246740] Disabling non-boot CPUs ...
[  103.247018] Broke affinity for irq 16
[  103.247023] Broke affinity for irq 17
[  103.248053] smpboot: CPU 1 is now offline
[  103.258928] Broke affinity for irq 16
[  103.258933] Broke affinity for irq 17
[  103.258942] Broke affinity for irq 29
[  103.259966] smpboot: CPU 2 is now offline
[  103.270825] Broke affinity for irq 1
[  103.270834] Broke affinity for irq 9
[  103.270839] Broke affinity for irq 12
[  103.270844] Broke affinity for irq 16
[  103.270848] Broke affinity for irq 17
[  103.270853] Broke affinity for irq 23
[  103.270855] Broke affinity for irq 25
[  103.270857] Broke affinity for irq 29
[  103.271880] smpboot: CPU 3 is now offline
[  103.287535] ACPI: Low-level resume complete
[  103.287600] ACPI : EC: EC started
[  103.287600] PM: Restoring platform NVS memory
[  103.288344] microcode: CPU0 microcode updated early to revision 0x4, date = 2013-06-28
[  103.288384] Enabling non-boot CPUs ...
[  103.307723] x86: Booting SMP configuration:
[  103.307724] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  103.310358]  cache: parent cpu1 should not be sleeping
[  103.310596] CPU1 is up
[  103.327754] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  103.328109] microcode: CPU2 microcode updated early to revision 0x4, date = 2013-06-28
[  103.330472]  cache: parent cpu2 should not be sleeping
[  103.330715] CPU2 is up
[  103.347791] smpboot: Booting Node 0 Processor 3 APIC 0x5
[  103.350346]  cache: parent cpu3 should not be sleeping
[  103.350585] CPU3 is up
[  103.353037] ACPI: Waking up from system sleep state S3
[  103.368155] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[  103.368197] PM: noirq resume of devices complete after 14.872 msecs
[  103.368486] PM: early resume of devices complete after 0.269 msecs
[  103.369773] ath: phy0: ASPM enabled: 0x43
[  103.369882] sd 0:0:0:0: [sda] Starting disk
[  103.599592] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
[  103.687616] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  103.687950] ata1.00: supports DRM functions and may not be fully accessible
[  103.688173] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  103.689996] ata1.00: supports DRM functions and may not be fully accessible
[  103.690168] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[  103.690293] ata1.00: configured for UDMA/133
[  103.695592] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  103.722761] ata2.00: configured for UDMA/100
[  104.579834] rtc_cmos 00:01: System wakeup disabled by ACPI
[  104.590613] PM: resume of devices complete after 1222.027 msecs
[  104.590869] PM: Finishing wakeup.
[  104.590871] Restarting tasks ... done.
[  105.506420] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086]
[  105.947853] video LNXVIDEO:01: Restoring backlight state
[  106.114126] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  106.136635] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  106.138522] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[  106.150018] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[  107.514786] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  108.473580] wlp3s0: authenticate with c4:27:95:8a:6f:86
[  108.490874] wlp3s0: send auth to c4:27:95:8a:6f:86 (try 1/3)
[  108.496367] wlp3s0: authenticated
[  108.499990] wlp3s0: associate with c4:27:95:8a:6f:86 (try 1/3)
[  108.503343] wlp3s0: RX AssocResp from c4:27:95:8a:6f:86 (capab=0x1411 status=0 aid=2)
[  108.503479] wlp3s0: associated
[  108.503544] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
orestis@orestis-Aspire-5742G:~$ 

ο σκληρός μου είναι /dev/sda1, το βάζω στην αναζήτηση αλλά δεν μου βγάζει τπτ. 

 

 

Το έπαθα και δεύτερη φορά. Και τις δύο φορές ο υπολογιστής είναι μια χαρά. Συνδέω το vga για μία εξωτερική οθόνη που έχω και το λάπτοπ κλείνει. Πάω να το ανοίξω και αρχίζει το boot loop. Βγάζω τον σκληρό, το ανοίγω και είναι μια χαρά. Και τις 2 φορές ακριβώς τα ίδια έγιναν.

 

Πριν λίγο πήγα να κάνω εγκατάσταση κάτι ενημερώσεις(kernel και κάτι άλλα) και μου έβγαλε σφάλμα ότι δεν έχω MB στο /boot. Έκανα apt-get autoremove και μετά έκανα εγκατάσταση μια χαρά. 

Υ.Γ. τα partitions τα έχω κάνει αυτόματα. δεν πείραξα εγώ τπτ

[jim_p]

Γιαυτο ειπα /dev/sda και οχι /dev/sda1. Το μεν ειναι ο πρωτος δισκος στο συστημα, το δευτερο ειναι το πρωτο partition πανω στον πρωτο δισκο. Αλλα απ' οτι βλεπω τον γραφει sda σκετο...

 

O sda αναφερεται σε αυτα τα σημεια παντως

[    6.097102] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    6.097201] sd 0:0:0:0: [sda] Write Protect is off
[    6.097206] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.097234] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.098034]  sda: sda1 sda2 < sda5 >
[    6.098353] sd 0:0:0:0: [sda] Attached SCSI disk
[   16.417614] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   16.419602] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[  101.631459] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  101.632980] sd 0:0:0:0: [sda] Stopping disk
[  103.369882] sd 0:0:0:0: [sda] Starting disk

Αυτα προς το παρον, δεν εχω κατι να προτεινω. Λογικα το προβλημα ειναι εκει που λεει stopping disk και starting disk.

[orestis000]

το έκανε k εχτές το βραδυ. Αυτήν την φορα κόλλαγε στο virtualbox. Καταρχάς θα κάνω "επανεγκασταστασh" του virtual box. Λέτε να είναι κάνα πρόβλημα με τον νέο kernel?