προβλημα-απορια linux ubuntu 12.04 lts

[mphxths]

το xorg.conf αν δεν δουλευει το ποντικι δεν εχει να κανει και πολλα..

 

στο παραπανω lsusb που παρεθεσε δεν βλεπω sharkoon ποντικι...μονο ενα microsoft και ενα logitech...

 

μπορεις να σκασεις dmesg...να δεις τι μηνυματα υπαρχουν..και αφου καρφωσεις το ποντικι ξανα dmesg..να δεις αν εβγαλε καποιο καινουργιο μηνυμα αναγνωρισης ποντικιου κλπ...

[bilakos10]

Λάθος, νόμιζα ότι το ποντίκι ήταν logitech

Επεξ/σία 22 Σεπτεμβρίου 2013 από bilakos10

[ennia]

[    0.243092] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.243125] pci 0000:00:1c.4:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.243164] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[    0.243195] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.243228] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.243260] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.243300] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.243331] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.243364] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.243410] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.243444] pci 0000:00:01.0: setting latency timer to 64
[    0.243448] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.243483] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.243516] pci 0000:00:1c.0: setting latency timer to 64
[    0.243521] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.243555] pci 0000:00:1c.4: setting latency timer to 64
[    0.243559] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.243592] pci 0000:00:1c.5: setting latency timer to 64
[    0.243597] pci 0000:00:1e.0: setting latency timer to 64
[    0.243600] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.243602] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.243604] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.243606] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.243607] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.243609] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[    0.243611] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.243613] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.243616] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.243618] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.243621] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf07fffff]
[    0.243623] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.243626] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.243628] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.243630] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.243633] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.243635] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.243637] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.243640] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.243643] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.243645] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.243647] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.243650] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.243652] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.243654] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.243657] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xffffffff]
[    0.243692] NET: Registered protocol family 2
[    0.243831] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.244704] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.247992] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.248486] TCP: Hash tables configured (established 524288 bind 65536)
[    0.248519] TCP reno registered
[    0.248558] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.248619] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.248771] NET: Registered protocol family 1
[    0.248831] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.248877] pci 0000:00:1a.0: PCI INT A disabled
[    0.248923] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.248966] pci 0000:00:1a.1: PCI INT B disabled
[    0.249003] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.249046] pci 0000:00:1a.2: PCI INT C disabled
[    0.249082] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.249142] pci 0000:00:1a.7: PCI INT C disabled
[    0.249185] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.249229] pci 0000:00:1d.0: PCI INT A disabled
[    0.249265] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.249309] pci 0000:00:1d.1: PCI INT B disabled
[    0.249345] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.249388] pci 0000:00:1d.2: PCI INT C disabled
[    0.249424] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.249471] pci 0000:00:1d.7: PCI INT A disabled
[    0.249513] pci 0000:01:00.0: Boot video device
[    0.249527] PCI: CLS 32 bytes, default 64
[    0.249529] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.249563] Placing 64MB software IO TLB between ffff8800cbf7e000 - ffff8800cff7e000
[    0.249597] software IO TLB at phys 0xcbf7e000 - 0xcff7e000
[    0.249918] audit: initializing netlink socket (disabled)
[    0.249956] type=2000 audit(1379886094.244:1): initialized
[    0.267082] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.269031] VFS: Disk quotas dquot_6.5.2
[    0.269105] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.269547] fuse init (API version 7.17)
[    0.269644] msgmni has been set to 7873
[    0.269920] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.269975] io scheduler noop registered
[    0.270005] io scheduler deadline registered
[    0.270061] io scheduler cfq registered (default)
[    0.270184] pcieport 0000:00:01.0: setting latency timer to 64
[    0.270210] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.270247] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.270276] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.270323] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.270352] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.270398] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.270429] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.270493] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.270537] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.270614] intel_idle: MWAIT substates: 0x22220
[    0.270615] intel_idle: does not run on family 6 model 23
[    0.270694] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.270733] ACPI: Power Button [PWRB]
[    0.270801] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.270837] ACPI: Power Button [PWRF]
[    0.271904] ERST: Table is not found!
[    0.271934] GHES: HEST is not enabled!
[    0.272029] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.292387] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.365529] Freeing initrd memory: 14096k freed
[    0.504503] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.504832] Linux agpgart interface v0.103
[    0.506151] brd: module loaded
[    0.506805] loop: module loaded
[    0.506965] ahci 0000:03:00.0: version 3.0
[    0.506979] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.520038] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.520078] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.520120] ahci 0000:03:00.0: setting latency timer to 64
[    0.520422] scsi0 : ahci
[    0.520523] scsi1 : ahci
[    0.520618] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    0.520654] ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[    0.520750] ata_piix 0000:00:1f.2: version 2.13
[    0.520756] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.520790] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.522100] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.522324] scsi2 : ata_piix
[    0.522409] scsi3 : ata_piix
[    0.523173] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[    0.523207] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[    0.523261] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.523317] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.523498] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.523665] scsi4 : ata_piix
[    0.523754] scsi5 : ata_piix
[    0.524389] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.524422] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.524502] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[    0.524536] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.524593] pata_acpi 0000:03:00.1: setting latency timer to 64
[    0.524604] pata_acpi 0000:03:00.1: PCI INT B disabled
[    0.524872] Fixed MDIO Bus: probed
[    0.524914] tun: Universal TUN/TAP device driver, 1.6
[    0.524944] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    0.525010] PPP generic driver version 2.4.2
[    0.525116] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.525157] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.525197] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.525199] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.525260] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.525317] ehci_hcd 0000:00:1a.7: debug port 1
[    0.529237] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.529248] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[    0.544013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.544165] hub 1-0:1.0: USB hub found
[    0.544197] hub 1-0:1.0: 6 ports detected
[    0.544282] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.544321] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.544324] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.544387] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.544441] ehci_hcd 0000:00:1d.7: debug port 1
[    0.548342] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.548352] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[    0.564013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.564167] hub 2-0:1.0: USB hub found
[    0.564198] hub 2-0:1.0: 6 ports detected
[    0.564284] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.564323] uhci_hcd: USB Universal Host Controller Interface driver
[    0.564363] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.564397] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.564400] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.564465] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.564518] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[    0.564645] hub 3-0:1.0: USB hub found
[    0.564677] hub 3-0:1.0: 2 ports detected
[    0.564754] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.564789] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.564791] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.564853] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.564911] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[    0.565034] hub 4-0:1.0: USB hub found
[    0.565065] hub 4-0:1.0: 2 ports detected
[    0.565144] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.565180] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.565182] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.565247] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.565299] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[    0.565422] hub 5-0:1.0: USB hub found
[    0.565457] hub 5-0:1.0: 2 ports detected
[    0.565535] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.565569] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.565572] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.565641] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.565693] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[    0.565816] hub 6-0:1.0: USB hub found
[    0.565847] hub 6-0:1.0: 2 ports detected
[    0.565924] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.565959] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.565962] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.566026] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.566078] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[    0.566202] hub 7-0:1.0: USB hub found
[    0.566234] hub 7-0:1.0: 2 ports detected
[    0.566311] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.566346] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.566348] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.566411] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.566463] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[    0.566586] hub 8-0:1.0: USB hub found
[    0.566617] hub 8-0:1.0: 2 ports detected
[    0.566734] usbcore: registered new interface driver libusual
[    0.566793] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.566823] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.567336] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.567450] mousedev: PS/2 mouse device common for all mice
[    0.567601] rtc_cmos 00:03: RTC can wake from S4
[    0.567715] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.567765] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.567856] device-mapper: uevent: version 1.0.3
[    0.567941] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[    0.567981] cpuidle: using governor ladder
[    0.568018] cpuidle: using governor menu
[    0.568048] EFI Variables Facility v0.08 2004-May-17
[    0.568255] TCP cubic registered
[    0.568364] NET: Registered protocol family 10
[    0.568752] NET: Registered protocol family 17
[    0.568784] Registering the dns_resolver key type
[    0.568909] PM: Hibernation image not present or could not be loaded.
[    0.568920] registered taskstats version 1
[    0.573827]   Magic number: 13:34:703
[    0.573943] rtc_cmos 00:03: setting system clock to 2013-09-22 21:41:35 UTC (1379886095)
[    0.574262] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.574293] EDD information not available.
[    0.589311] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.840035] ata2: SATA link down (SStatus 0 SControl 300)
[    0.840099] ata1: SATA link down (SStatus 0 SControl 300)
[    0.854594] ata6: SATA link down (SStatus 0 SControl 300)
[    0.876015] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[    1.000045] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.008233] ata5.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
[    1.008268] ata5.00: 488397168 sectors, multi 16: LBA48 
[    1.009600] hub 2-2:1.0: USB hub found
[    1.009940] hub 2-2:1.0: 4 ports detected
[    1.024231] ata5.00: configured for UDMA/133
[    1.248013] Refined TSC clocksource calibration: 2999.658 MHz.
[    1.248049] Switching to clocksource tsc
[    1.320052] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.320096] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.336117] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100
[    1.336295] ata4.01: ATA-8: WDC WD6400AAKS-00A7B0, 01.03B01, max UDMA/133
[    1.336330] ata4.01: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.352118] ata4.00: configured for UDMA/100
[    1.360629] ata4.01: configured for UDMA/133
[    1.416009] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    1.876009] usb 7-2: new low-speed USB device number 3 using uhci_hcd
[    1.876065] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.876112] ata3.01: SATA link down (SStatus 0 SControl 300)
[    1.901213] ata3.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133
[    1.901248] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.909221] ata3.00: configured for UDMA/133
[    1.909357] scsi 2:0:0:0: Direct-Access     ATA      WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5
[    1.909477] sd 2:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    1.909493] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.909650] sd 2:0:0:0: [sda] Write Protect is off
[    1.909681] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.909703] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.910231] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203D  SB00 PQ: 0 ANSI: 5
[    1.912884] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.912923] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.913034] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.913122] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.913740] scsi 3:0:1:0: Direct-Access     ATA      WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
[    1.913862] sd 3:0:1:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.913921] sd 3:0:1:0: Attached scsi generic sg2 type 0
[    1.913938] sd 3:0:1:0: [sdb] Write Protect is off
[    1.913940] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.913957] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.914085] scsi 4:0:0:0: Direct-Access     ATA      WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
[    1.914194] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.914252] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    1.914270] sd 4:0:0:0: [sdc] Write Protect is off
[    1.914272] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.914288] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.918864]  sdb: sdb1
[    1.919071] sd 3:0:1:0: [sdb] Attached SCSI disk
[    1.928816]  sda: sda1
[    1.929017] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.959694]  sdc: sdc1 sdc2 < sdc5 >
[    1.959960] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.961200] Freeing unused kernel memory: 924k freed
[    1.961445] Write protecting the kernel read-only data: 12288k
[    1.965549] Freeing unused kernel memory: 1588k freed
[    1.968939] Freeing unused kernel memory: 1188k freed
[    1.980200] udevd[96]: starting version 175
[    1.995347] xor: automatically using best checksumming function: generic_sse
[    2.012004]    generic_sse: 11146.000 MB/sec
[    2.012040] xor: using function: generic_sse (11146.000 MB/sec)
[    2.015295] device-mapper: dm-raid45: initialized v0.2594b
[    2.043613] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.043667] ATL1E 0000:02:00.0: setting latency timer to 64
[    2.044669] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.044738] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    2.055615] scsi6 : pata_jmicron
[    2.058994] scsi7 : pata_jmicron
[    2.059344] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    2.059380] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    2.067734] Floppy drive(s): fd0 is 1.44M
[    2.070340] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3
[    2.070450] generic-usb 0003:04D9:A081.0001: input,hidraw0: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:00:1d.1-1/input0
[    2.081433] generic-usb: probe of 0003:04D9:A081.0002 failed with error -22
[    2.083871] FDC 0 is a post-1991 82077
[    2.093279] generic-usb 0003:04D9:A081.0003: hiddev0,hidraw1: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:00:1d.1-1/input2
[    2.093389] usbcore: registered new interface driver usbhid
[    2.093421] usbhid: USB HID core driver
[    2.110481] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4
[    2.110893] logitech 0003:046D:C517.0004: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[    2.128323] usb 2-2.1: new low-speed USB device number 5 using ehci_hcd
[    2.142143] logitech 0003:046D:C517.0005: fixing up Logitech keyboard report descriptor
[    2.142768] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input5
[    2.142912] logitech 0003:046D:C517.0005: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[    2.227295] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.1/2-2.1:1.0/input/input6
[    2.227422] generic-usb 0003:045E:0040.0006: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.7-2.1/input0
[    2.385068] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.434762] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    2.441563] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    2.940108] firewire_core: created device fw0: GUID 001e8c0001510145, S400
[    4.466044] udevd[379]: starting version 175
[    6.779119] device-mapper: multipath: version 1.3.1 loaded
[    6.818704] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.884829] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    6.884832] Disabling lock debugging due to kernel taint
[    7.026095] [fglrx] Maximum main memory to use for locked dma buffers: 3792 MBytes.
[    7.026328] [fglrx]   vendor: 1002 device: 683f count: 1
[    7.026756] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[    7.026767] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.026771] pci 0000:01:00.0: setting latency timer to 64
[    7.026991] [fglrx] Kernel PAT support is enabled
[    7.027005] [fglrx] module loaded - fglrx 12.10.5 [Mar 28 2013] with 1 minors
[    7.535977] snd_oxygen 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.569176] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.569223] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[    7.569242] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    8.094300] Too many HDMI devices
[    8.094302] Too many HDMI devices
[    8.094303] Too many HDMI devices
[    8.094304] Too many HDMI devices
[    8.094305] Too many HDMI devices
[    8.094306] Too many HDMI devices
[    8.094307] Too many HDMI devices
[    8.094308] Too many HDMI devices
[    8.094399] hda-codec: out of range cmd 0:0:afd0:707:40
[    8.094432] hda-codec: out of range cmd 0:0:afd0:708:85
[    8.094550] hda-codec: out of range cmd 0:0:1bbb:707:40
[    8.094580] hda-codec: out of range cmd 0:0:1bbb:708:8a
[    8.094740] hda-codec: out of range cmd 0:0:afd0:f00:c
[    8.094770] hda-codec: out of range cmd 0:0:afd0:709:0
[    8.094800] hda-codec: out of range cmd 0:0:afd0:f09:0
[    8.094851] hda-codec: out of range cmd 0:0:1bbb:f00:c
[    8.094881] hda-codec: out of range cmd 0:0:1bbb:709:0
[    8.094911] hda-codec: out of range cmd 0:0:1bbb:f09:0
[    8.094992] hda-codec: out of range cmd 0:0:e0:f0d:0
[    8.095023] HDMI status: Codec=0 Pin=2 Presence_Detect=0 ELD_Valid=0
[    8.095041] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[    8.095059] HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
[    8.095078] HDMI status: Codec=0 Pin=9 Presence_Detect=0 ELD_Valid=0
[    8.095115] HDMI status: Codec=0 Pin=45008 Presence_Detect=1 ELD_Valid=1
[    8.095117] hda-codec: out of range cmd 0:0:afd0:f2e:8
[    8.095149] hda_codec: cannot build controls for #0 (error -16)
[    8.095186] hda_codec: cannot revert codec
[    8.095550] snd_hda_intel 0000:01:00.1: PCI INT B disabled
[    8.095559] snd_hda_intel: probe of 0000:01:00.1 failed with error -16
[   15.908923] lp: driver loaded but no devices found
[   16.287568] Adding 17582076k swap on /dev/sdc5.  Priority:-1 extents:1 across:17582076k 
[   16.648457] init: udev-fallback-graphics main process (1240) terminated with status 1
[   16.841385] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[   18.476292] init: failsafe main process (1290) killed by TERM signal
[   18.481493] init: friendly-recovery post-stop process (912) terminated with status 1
[   20.588200] ppdev: user-space parallel port driver
[   21.277348] Bluetooth: Core ver 2.16
[   21.277365] NET: Registered protocol family 31
[   21.277367] Bluetooth: HCI device and connection manager initialized
[   21.277369] Bluetooth: HCI socket layer initialized
[   21.277371] Bluetooth: L2CAP socket layer initialized
[   21.277560] Bluetooth: SCO socket layer initialized
[   21.311169] Bluetooth: RFCOMM TTY layer initialized
[   21.311173] Bluetooth: RFCOMM socket layer initialized
[   21.311174] Bluetooth: RFCOMM ver 1.11
[   22.174554] type=1400 audit(1379875317.095:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1381 comm="apparmor_parser"
[   22.174928] type=1400 audit(1379875317.095:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1381 comm="apparmor_parser"
[   22.244205] type=1400 audit(1379875317.167:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1396 comm="apparmor_parser"
[   22.244514] type=1400 audit(1379875317.167:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1396 comm="apparmor_parser"
[   22.244691] type=1400 audit(1379875317.167:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1396 comm="apparmor_parser"
[   22.269969] type=1400 audit(1379875317.191:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1395 comm="apparmor_parser"
[   22.270226] type=1400 audit(1379875317.191:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1395 comm="apparmor_parser"
[   22.460058] type=1400 audit(1379875317.383:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1401 comm="apparmor_parser"
[   22.460428] type=1400 audit(1379875317.383:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1401 comm="apparmor_parser"
[   22.463120] type=1400 audit(1379875317.383:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1404 comm="apparmor_parser"
[   23.040522] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.040524] Bluetooth: BNEP filters: protocol multicast
[   27.538624] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.538780] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.539510] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[   27.539783] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   35.650513] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[   35.651051] [fglrx] Firegl kernel thread PID: 2085
[   35.651108] [fglrx] Firegl kernel thread PID: 2086
[   35.651162] [fglrx] Firegl kernel thread PID: 2087
[   35.651249] [fglrx] IRQ 44 Enabled
[   35.659735] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   35.659738] [fglrx] Reserved FB block: Unshared offset:f8a4000, size:45c000 
[   35.659740] [fglrx] Reserved FB block: Unshared offset:3ffee000, size:12000 
[   35.713571] [fglrx:firegl_get_console_mode_info] *ERROR* Get Console Mode failed
[   37.684080] init: plymouth-upstart-bridge main process (1321) killed by TERM signal
[   37.888004] eth0: no IPv6 routers present
[   39.752819] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   39.754809] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   39.762292] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   39.764462] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   39.766626] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   39.768765] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   55.313830] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   55.315770] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   55.336273] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   56.236491] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   56.367737] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   56.458686] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  149.172015] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  149.174022] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  149.419314] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  149.455229] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  150.884158] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  151.267218] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.

αυτο με το ποντικι πανω

 

και αυτο χωρις το ποντικι

t pref]
[    0.243300] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.243331] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.243364] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.243410] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.243444] pci 0000:00:01.0: setting latency timer to 64
[    0.243448] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.243483] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.243516] pci 0000:00:1c.0: setting latency timer to 64
[    0.243521] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.243555] pci 0000:00:1c.4: setting latency timer to 64
[    0.243559] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.243592] pci 0000:00:1c.5: setting latency timer to 64
[    0.243597] pci 0000:00:1e.0: setting latency timer to 64
[    0.243600] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.243602] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.243604] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.243606] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.243607] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.243609] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[    0.243611] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.243613] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.243616] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.243618] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.243621] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf07fffff]
[    0.243623] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.243626] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.243628] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.243630] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.243633] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.243635] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.243637] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.243640] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.243643] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.243645] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.243647] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.243650] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.243652] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.243654] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.243657] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xffffffff]
[    0.243692] NET: Registered protocol family 2
[    0.243831] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.244704] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.247992] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.248486] TCP: Hash tables configured (established 524288 bind 65536)
[    0.248519] TCP reno registered
[    0.248558] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.248619] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.248771] NET: Registered protocol family 1
[    0.248831] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.248877] pci 0000:00:1a.0: PCI INT A disabled
[    0.248923] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.248966] pci 0000:00:1a.1: PCI INT B disabled
[    0.249003] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.249046] pci 0000:00:1a.2: PCI INT C disabled
[    0.249082] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.249142] pci 0000:00:1a.7: PCI INT C disabled
[    0.249185] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.249229] pci 0000:00:1d.0: PCI INT A disabled
[    0.249265] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.249309] pci 0000:00:1d.1: PCI INT B disabled
[    0.249345] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.249388] pci 0000:00:1d.2: PCI INT C disabled
[    0.249424] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.249471] pci 0000:00:1d.7: PCI INT A disabled
[    0.249513] pci 0000:01:00.0: Boot video device
[    0.249527] PCI: CLS 32 bytes, default 64
[    0.249529] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.249563] Placing 64MB software IO TLB between ffff8800cbf7e000 - ffff8800cff7e000
[    0.249597] software IO TLB at phys 0xcbf7e000 - 0xcff7e000
[    0.249918] audit: initializing netlink socket (disabled)
[    0.249956] type=2000 audit(1379886094.244:1): initialized
[    0.267082] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.269031] VFS: Disk quotas dquot_6.5.2
[    0.269105] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.269547] fuse init (API version 7.17)
[    0.269644] msgmni has been set to 7873
[    0.269920] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.269975] io scheduler noop registered
[    0.270005] io scheduler deadline registered
[    0.270061] io scheduler cfq registered (default)
[    0.270184] pcieport 0000:00:01.0: setting latency timer to 64
[    0.270210] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.270247] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.270276] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.270323] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.270352] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.270398] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.270429] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.270493] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.270537] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.270614] intel_idle: MWAIT substates: 0x22220
[    0.270615] intel_idle: does not run on family 6 model 23
[    0.270694] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.270733] ACPI: Power Button [PWRB]
[    0.270801] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.270837] ACPI: Power Button [PWRF]
[    0.271904] ERST: Table is not found!
[    0.271934] GHES: HEST is not enabled!
[    0.272029] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.292387] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.365529] Freeing initrd memory: 14096k freed
[    0.504503] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.504832] Linux agpgart interface v0.103
[    0.506151] brd: module loaded
[    0.506805] loop: module loaded
[    0.506965] ahci 0000:03:00.0: version 3.0
[    0.506979] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.520038] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.520078] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.520120] ahci 0000:03:00.0: setting latency timer to 64
[    0.520422] scsi0 : ahci
[    0.520523] scsi1 : ahci
[    0.520618] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    0.520654] ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[    0.520750] ata_piix 0000:00:1f.2: version 2.13
[    0.520756] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.520790] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.522100] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.522324] scsi2 : ata_piix
[    0.522409] scsi3 : ata_piix
[    0.523173] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[    0.523207] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[    0.523261] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.523317] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.523498] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.523665] scsi4 : ata_piix
[    0.523754] scsi5 : ata_piix
[    0.524389] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.524422] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.524502] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[    0.524536] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.524593] pata_acpi 0000:03:00.1: setting latency timer to 64
[    0.524604] pata_acpi 0000:03:00.1: PCI INT B disabled
[    0.524872] Fixed MDIO Bus: probed
[    0.524914] tun: Universal TUN/TAP device driver, 1.6
[    0.524944] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    0.525010] PPP generic driver version 2.4.2
[    0.525116] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.525157] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.525197] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.525199] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.525260] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.525317] ehci_hcd 0000:00:1a.7: debug port 1
[    0.529237] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.529248] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[    0.544013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.544165] hub 1-0:1.0: USB hub found
[    0.544197] hub 1-0:1.0: 6 ports detected
[    0.544282] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.544321] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.544324] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.544387] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.544441] ehci_hcd 0000:00:1d.7: debug port 1
[    0.548342] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.548352] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[    0.564013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.564167] hub 2-0:1.0: USB hub found
[    0.564198] hub 2-0:1.0: 6 ports detected
[    0.564284] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.564323] uhci_hcd: USB Universal Host Controller Interface driver
[    0.564363] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.564397] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.564400] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.564465] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.564518] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[    0.564645] hub 3-0:1.0: USB hub found
[    0.564677] hub 3-0:1.0: 2 ports detected
[    0.564754] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.564789] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.564791] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.564853] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.564911] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[    0.565034] hub 4-0:1.0: USB hub found
[    0.565065] hub 4-0:1.0: 2 ports detected
[    0.565144] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.565180] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.565182] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.565247] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.565299] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[    0.565422] hub 5-0:1.0: USB hub found
[    0.565457] hub 5-0:1.0: 2 ports detected
[    0.565535] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.565569] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.565572] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.565641] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.565693] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[    0.565816] hub 6-0:1.0: USB hub found
[    0.565847] hub 6-0:1.0: 2 ports detected
[    0.565924] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.565959] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.565962] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.566026] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.566078] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[    0.566202] hub 7-0:1.0: USB hub found
[    0.566234] hub 7-0:1.0: 2 ports detected
[    0.566311] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.566346] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.566348] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.566411] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.566463] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[    0.566586] hub 8-0:1.0: USB hub found
[    0.566617] hub 8-0:1.0: 2 ports detected
[    0.566734] usbcore: registered new interface driver libusual
[    0.566793] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.566823] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.567336] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.567450] mousedev: PS/2 mouse device common for all mice
[    0.567601] rtc_cmos 00:03: RTC can wake from S4
[    0.567715] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.567765] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.567856] device-mapper: uevent: version 1.0.3
[    0.567941] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[    0.567981] cpuidle: using governor ladder
[    0.568018] cpuidle: using governor menu
[    0.568048] EFI Variables Facility v0.08 2004-May-17
[    0.568255] TCP cubic registered
[    0.568364] NET: Registered protocol family 10
[    0.568752] NET: Registered protocol family 17
[    0.568784] Registering the dns_resolver key type
[    0.568909] PM: Hibernation image not present or could not be loaded.
[    0.568920] registered taskstats version 1
[    0.573827]   Magic number: 13:34:703
[    0.573943] rtc_cmos 00:03: setting system clock to 2013-09-22 21:41:35 UTC (1379886095)
[    0.574262] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.574293] EDD information not available.
[    0.589311] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.840035] ata2: SATA link down (SStatus 0 SControl 300)
[    0.840099] ata1: SATA link down (SStatus 0 SControl 300)
[    0.854594] ata6: SATA link down (SStatus 0 SControl 300)
[    0.876015] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[    1.000045] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.008233] ata5.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
[    1.008268] ata5.00: 488397168 sectors, multi 16: LBA48 
[    1.009600] hub 2-2:1.0: USB hub found
[    1.009940] hub 2-2:1.0: 4 ports detected
[    1.024231] ata5.00: configured for UDMA/133
[    1.248013] Refined TSC clocksource calibration: 2999.658 MHz.
[    1.248049] Switching to clocksource tsc
[    1.320052] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.320096] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.336117] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100
[    1.336295] ata4.01: ATA-8: WDC WD6400AAKS-00A7B0, 01.03B01, max UDMA/133
[    1.336330] ata4.01: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.352118] ata4.00: configured for UDMA/100
[    1.360629] ata4.01: configured for UDMA/133
[    1.416009] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    1.876009] usb 7-2: new low-speed USB device number 3 using uhci_hcd
[    1.876065] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.876112] ata3.01: SATA link down (SStatus 0 SControl 300)
[    1.901213] ata3.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133
[    1.901248] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.909221] ata3.00: configured for UDMA/133
[    1.909357] scsi 2:0:0:0: Direct-Access     ATA      WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5
[    1.909477] sd 2:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    1.909493] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.909650] sd 2:0:0:0: [sda] Write Protect is off
[    1.909681] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.909703] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.910231] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203D  SB00 PQ: 0 ANSI: 5
[    1.912884] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.912923] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.913034] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.913122] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.913740] scsi 3:0:1:0: Direct-Access     ATA      WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
[    1.913862] sd 3:0:1:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.913921] sd 3:0:1:0: Attached scsi generic sg2 type 0
[    1.913938] sd 3:0:1:0: [sdb] Write Protect is off
[    1.913940] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.913957] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.914085] scsi 4:0:0:0: Direct-Access     ATA      WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
[    1.914194] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.914252] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    1.914270] sd 4:0:0:0: [sdc] Write Protect is off
[    1.914272] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.914288] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.918864]  sdb: sdb1
[    1.919071] sd 3:0:1:0: [sdb] Attached SCSI disk
[    1.928816]  sda: sda1
[    1.929017] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.959694]  sdc: sdc1 sdc2 < sdc5 >
[    1.959960] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.961200] Freeing unused kernel memory: 924k freed
[    1.961445] Write protecting the kernel read-only data: 12288k
[    1.965549] Freeing unused kernel memory: 1588k freed
[    1.968939] Freeing unused kernel memory: 1188k freed
[    1.980200] udevd[96]: starting version 175
[    1.995347] xor: automatically using best checksumming function: generic_sse
[    2.012004]    generic_sse: 11146.000 MB/sec
[    2.012040] xor: using function: generic_sse (11146.000 MB/sec)
[    2.015295] device-mapper: dm-raid45: initialized v0.2594b
[    2.043613] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.043667] ATL1E 0000:02:00.0: setting latency timer to 64
[    2.044669] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.044738] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    2.055615] scsi6 : pata_jmicron
[    2.058994] scsi7 : pata_jmicron
[    2.059344] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    2.059380] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    2.067734] Floppy drive(s): fd0 is 1.44M
[    2.070340] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3
[    2.070450] generic-usb 0003:04D9:A081.0001: input,hidraw0: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:00:1d.1-1/input0
[    2.081433] generic-usb: probe of 0003:04D9:A081.0002 failed with error -22
[    2.083871] FDC 0 is a post-1991 82077
[    2.093279] generic-usb 0003:04D9:A081.0003: hiddev0,hidraw1: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:00:1d.1-1/input2
[    2.093389] usbcore: registered new interface driver usbhid
[    2.093421] usbhid: USB HID core driver
[    2.110481] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4
[    2.110893] logitech 0003:046D:C517.0004: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[    2.128323] usb 2-2.1: new low-speed USB device number 5 using ehci_hcd
[    2.142143] logitech 0003:046D:C517.0005: fixing up Logitech keyboard report descriptor
[    2.142768] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input5
[    2.142912] logitech 0003:046D:C517.0005: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[    2.227295] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.1/2-2.1:1.0/input/input6
[    2.227422] generic-usb 0003:045E:0040.0006: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.7-2.1/input0
[    2.385068] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.434762] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    2.441563] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    2.940108] firewire_core: created device fw0: GUID 001e8c0001510145, S400
[    4.466044] udevd[379]: starting version 175
[    6.779119] device-mapper: multipath: version 1.3.1 loaded
[    6.818704] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.884829] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    6.884832] Disabling lock debugging due to kernel taint
[    7.026095] [fglrx] Maximum main memory to use for locked dma buffers: 3792 MBytes.
[    7.026328] [fglrx]   vendor: 1002 device: 683f count: 1
[    7.026756] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[    7.026767] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.026771] pci 0000:01:00.0: setting latency timer to 64
[    7.026991] [fglrx] Kernel PAT support is enabled
[    7.027005] [fglrx] module loaded - fglrx 12.10.5 [Mar 28 2013] with 1 minors
[    7.535977] snd_oxygen 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.569176] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.569223] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[    7.569242] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    8.094300] Too many HDMI devices
[    8.094302] Too many HDMI devices
[    8.094303] Too many HDMI devices
[    8.094304] Too many HDMI devices
[    8.094305] Too many HDMI devices
[    8.094306] Too many HDMI devices
[    8.094307] Too many HDMI devices
[    8.094308] Too many HDMI devices
[    8.094399] hda-codec: out of range cmd 0:0:afd0:707:40
[    8.094432] hda-codec: out of range cmd 0:0:afd0:708:85
[    8.094550] hda-codec: out of range cmd 0:0:1bbb:707:40
[    8.094580] hda-codec: out of range cmd 0:0:1bbb:708:8a
[    8.094740] hda-codec: out of range cmd 0:0:afd0:f00:c
[    8.094770] hda-codec: out of range cmd 0:0:afd0:709:0
[    8.094800] hda-codec: out of range cmd 0:0:afd0:f09:0
[    8.094851] hda-codec: out of range cmd 0:0:1bbb:f00:c
[    8.094881] hda-codec: out of range cmd 0:0:1bbb:709:0
[    8.094911] hda-codec: out of range cmd 0:0:1bbb:f09:0
[    8.094992] hda-codec: out of range cmd 0:0:e0:f0d:0
[    8.095023] HDMI status: Codec=0 Pin=2 Presence_Detect=0 ELD_Valid=0
[    8.095041] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[    8.095059] HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
[    8.095078] HDMI status: Codec=0 Pin=9 Presence_Detect=0 ELD_Valid=0
[    8.095115] HDMI status: Codec=0 Pin=45008 Presence_Detect=1 ELD_Valid=1
[    8.095117] hda-codec: out of range cmd 0:0:afd0:f2e:8
[    8.095149] hda_codec: cannot build controls for #0 (error -16)
[    8.095186] hda_codec: cannot revert codec
[    8.095550] snd_hda_intel 0000:01:00.1: PCI INT B disabled
[    8.095559] snd_hda_intel: probe of 0000:01:00.1 failed with error -16
[   15.908923] lp: driver loaded but no devices found
[   16.287568] Adding 17582076k swap on /dev/sdc5.  Priority:-1 extents:1 across:17582076k 
[   16.648457] init: udev-fallback-graphics main process (1240) terminated with status 1
[   16.841385] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[   18.476292] init: failsafe main process (1290) killed by TERM signal
[   18.481493] init: friendly-recovery post-stop process (912) terminated with status 1
[   20.588200] ppdev: user-space parallel port driver
[   21.277348] Bluetooth: Core ver 2.16
[   21.277365] NET: Registered protocol family 31
[   21.277367] Bluetooth: HCI device and connection manager initialized
[   21.277369] Bluetooth: HCI socket layer initialized
[   21.277371] Bluetooth: L2CAP socket layer initialized
[   21.277560] Bluetooth: SCO socket layer initialized
[   21.311169] Bluetooth: RFCOMM TTY layer initialized
[   21.311173] Bluetooth: RFCOMM socket layer initialized
[   21.311174] Bluetooth: RFCOMM ver 1.11
[   22.174554] type=1400 audit(1379875317.095:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1381 comm="apparmor_parser"
[   22.174928] type=1400 audit(1379875317.095:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1381 comm="apparmor_parser"
[   22.244205] type=1400 audit(1379875317.167:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1396 comm="apparmor_parser"
[   22.244514] type=1400 audit(1379875317.167:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1396 comm="apparmor_parser"
[   22.244691] type=1400 audit(1379875317.167:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1396 comm="apparmor_parser"
[   22.269969] type=1400 audit(1379875317.191:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1395 comm="apparmor_parser"
[   22.270226] type=1400 audit(1379875317.191:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1395 comm="apparmor_parser"
[   22.460058] type=1400 audit(1379875317.383:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1401 comm="apparmor_parser"
[   22.460428] type=1400 audit(1379875317.383:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1401 comm="apparmor_parser"
[   22.463120] type=1400 audit(1379875317.383:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1404 comm="apparmor_parser"
[   23.040522] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.040524] Bluetooth: BNEP filters: protocol multicast
[   27.538624] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.538780] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.539510] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[   27.539783] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   35.650513] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[   35.651051] [fglrx] Firegl kernel thread PID: 2085
[   35.651108] [fglrx] Firegl kernel thread PID: 2086
[   35.651162] [fglrx] Firegl kernel thread PID: 2087
[   35.651249] [fglrx] IRQ 44 Enabled
[   35.659735] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   35.659738] [fglrx] Reserved FB block: Unshared offset:f8a4000, size:45c000 
[   35.659740] [fglrx] Reserved FB block: Unshared offset:3ffee000, size:12000 
[   35.713571] [fglrx:firegl_get_console_mode_info] *ERROR* Get Console Mode failed
[   37.684080] init: plymouth-upstart-bridge main process (1321) killed by TERM signal
[   37.888004] eth0: no IPv6 routers present
[   39.752819] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   39.754809] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   39.762292] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   39.764462] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   39.766626] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   39.768765] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   55.313830] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   55.315770] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   55.336273] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   56.236491] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   56.367737] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[   56.458686] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  149.172015] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  149.174022] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  149.419314] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  149.455229] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  150.884158] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[  151.267218] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[ 1360.740951] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[ 1360.742959] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[ 1360.755912] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[ 1360.799630] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[ 1360.925328] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[ 1360.963443] [fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[ 1655.304043] usb 7-1: USB disconnect, device number 2

[mphxths]

βαλτο σε spoiler..μας εσκισες...

[tritonas00]

με το που ανοιξα το thread επεσε ο γενικος του σπιτιου...

[mphxths]

Eντωμεταξυ το μονο μεμπτο που βλεπω και ισως εχει σχεση ειναι το παρακατω

 

[ 2.070340] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3
[ 2.070450] generic-usb 0003:04D9:A081.0001: input,hidraw0: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:00:1d.1-1/input0
[ 2.081433] generic-usb: probe of 0003:04D9:A081.0002 failed with error -22

 

 

δηλ ενα ποντικι που αναγνωριζεται σαν πληκτρολογιο...καπου το χω ξαναδει αυτο το φαινομενο...

 

οπως βλεπω στο παρακατω λινκ οπου holtek = sharkoon αλλα η λυση που δινει ο τυπος δεν ειναι για αρχαριους...

 

http://askubuntu.com/questions/232564/sharkoon-drakonia-gaming-mouse-doesnt-work-at-all

[chek2fire]

ασε που σε κάθε update του kernel κατά  πάσα πιθανότητα θα πρέπει να κάνει πάλι την ίδια διαδικασία για να του ξαναδουλέψει. Πάντως πολύ παράδοξο να μην δουλεύει το ποντικι.

[ennia]

 

 

δηλ ενα ποντικι που αναγνωριζεται σαν πληκτρολογιο...καπου το χω ξαναδει αυτο το φαινομενο...

 

 

 

 

εχω επανω ενα ασυρματο πληκτρολογιο logitech το οποιο πηγαινε σετ με ποντικι το οποιο δεν δειτουργει και το καρφακι του δεν ειναι πανω σε θυρα.

 

 

μου φαινεται θα το παρατησω ετσι οπως ειναι και θα γυρισω στα windows 7

[ALLisCHAOS]

απ ότι θυμάμαι λες πως αναγνωρίζει ένα ποντικι της ms 10 χρονών...γιατι δν βάζεις αυτο? κρίμα να το παρατήσεις μόνο για ένα προβλημα ποντικιού