Fedora no boot.

[cyberrobot]

Καλησπέρα σε όσους έχουν την υπομονή να είναι online και να μην λιώνουν στην ξαπλώστρα σε κάποια παραλία.

 

Τις προάλλες προέκυψε ένα θέμα με το που πέρασα από τον 3.9 στον 3.10 κερνελ στο fedora 19. Όταν ανοίγω το laptop δεν σηκώνει το kde και γενικότερα γραφικά για να κάνω log in με αποτέλεσμα να πρέπει να κάνω hard reset για να μπορέσει να μπει. 

 

ποστάρω και τα μνματα του κερνελ 

 

 

 

 

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.5-201.fc19.x86_64 ([email protected]) (gcc version 4.8.1 20130603 (Red Hat 4.8.1-1) (GCC) ) #1 SMP Wed Aug 7 16:25:24 UTC 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.5-201.fc19.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root rhgb quiet LANG=en_US.UTF-8
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf27bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf27c000-0x00000000bf281fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf282000-0x00000000bf3ecfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf3ed000-0x00000000bf40efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf40f000-0x00000000bf46efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf46f000-0x00000000bf46ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf470000-0x00000000bf4f0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf4f1000-0x00000000bf70efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf70f000-0x00000000bf716fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf717000-0x00000000bf71efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf71f000-0x00000000bf77efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf77f000-0x00000000bf79efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7e2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf7e3000-0x00000000bf7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0c0a000-0x00000000f0c0afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: FUJITSU LIFEBOOK AH530/FJNBB0B, BIOS Version 1.07   08/12/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask F00000000 write-back
[    0.000000]   4 base 200000000 mask FC0000000 write-back
[    0.000000]   5 base 23C000000 mask FFC000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f6820-0x000f682f] mapped at [ffff8800000f6820]
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
[    0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[    0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23be00000-0x23bffffff]
[    0.000000]  [mem 0x23be00000-0x23bffffff] page 2M
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x238000000-0x23bdfffff]
[    0.000000]  [mem 0x238000000-0x23bdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x237ffffff]
[    0.000000]  [mem 0x200000000-0x237ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbf27bfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbf1fffff] page 2M
[    0.000000]  [mem 0xbf200000-0xbf27bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf282000-0xbf3ecfff]
[    0.000000]  [mem 0xbf282000-0xbf3ecfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf40f000-0xbf46efff]
[    0.000000]  [mem 0xbf40f000-0xbf46efff] page 4k
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbf70f000-0xbf716fff]
[    0.000000]  [mem 0xbf70f000-0xbf716fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf71f000-0xbf77efff]
[    0.000000]  [mem 0xbf71f000-0xbf77efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf79f000-0xbf7e2fff]
[    0.000000]  [mem 0xbf79f000-0xbf7e2fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[    0.000000]  [mem 0xbf7ff000-0xbf7fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[    0.000000]  [mem 0x100000000-0x1fbffffff] page 2M
[    0.000000] RAMDISK: [mem 0x36cf2000-0x37670fff]
[    0.000000] ACPI: RSDP 00000000000f6710 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 00000000bf7f6106 00064 (v01 FSC    PC       00010700  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bf7e5000 000F4 (v03 FSC    PC       00010700 PTEC 00000001)
[    0.000000] ACPI: DSDT 00000000bf7e6000 08A68 (v02 FUJ    FJNBB0B  00010700 INTL 20060912)
[    0.000000] ACPI: FACS 00000000bf79bfc0 00040
[    0.000000] ACPI: HPET 00000000bf7fed6a 00038 (v01 FUJ    PC       00010700 PTEC 00000001)
[    0.000000] ACPI: MCFG 00000000bf7feda2 0003C (v01 FUJ    PC       00010700 PTEC 00000001)
[    0.000000] ACPI: APIC 00000000bf7fedde 00084 (v01 FUJ    PC       00010700  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000bf7fee62 00028 (v01 FUJ    PC       00010700  LTP 00000001)
[    0.000000] ACPI: SLIC 00000000bf7fee8a 00176 (v01 FSC    PC       00010700 FSC  00000100)
[    0.000000] ACPI: DMAR 00000000bf7ef000 00080 (v01 INTEL  CP_DALE  00000001 INTL 00000001)
[    0.000000] ACPI: SSDT 00000000bf7e4000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23bffffff]
[    0.000000]   NODE_DATA [mem 0x23bfe4000-0x23bff7fff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23bffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009bfff]
[    0.000000]   node   0: [mem 0x00100000-0xbf27bfff]
[    0.000000]   node   0: [mem 0xbf282000-0xbf3ecfff]
[    0.000000]   node   0: [mem 0xbf40f000-0xbf46efff]
[    0.000000]   node   0: [mem 0xbf70f000-0xbf716fff]
[    0.000000]   node   0: [mem 0xbf71f000-0xbf77efff]
[    0.000000]   node   0: [mem 0xbf79f000-0xbf7e2fff]
[    0.000000]   node   0: [mem 0xbf7ff000-0xbf7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x1fbffffff]
[    0.000000]   node   0: [mem 0x200000000-0x23bffffff]
[    0.000000] On node 0 totalpages: 2061455
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12180 pages used for memmap
[    0.000000]   DMA32 zone: 779508 pages, LIFO batch:31
[    0.000000]   Normal zone: 20224 pages used for memmap
[    0.000000]   Normal zone: 1277952 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf27c000 - 00000000bf282000
[    0.000000] PM: Registered nosave memory: 00000000bf3ed000 - 00000000bf40f000
[    0.000000] PM: Registered nosave memory: 00000000bf46f000 - 00000000bf470000
[    0.000000] PM: Registered nosave memory: 00000000bf470000 - 00000000bf4f1000
[    0.000000] PM: Registered nosave memory: 00000000bf4f1000 - 00000000bf70f000
[    0.000000] PM: Registered nosave memory: 00000000bf717000 - 00000000bf71f000
[    0.000000] PM: Registered nosave memory: 00000000bf77f000 - 00000000bf79f000
[    0.000000] PM: Registered nosave memory: 00000000bf7e3000 - 00000000bf7ff000
[    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f0c0a000
[    0.000000] PM: Registered nosave memory: 00000000f0c0a000 - 00000000f0c0b000
[    0.000000] PM: Registered nosave memory: 00000000f0c0b000 - 00000000feaff000
[    0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] PM: Registered nosave memory: 00000001fc000000 - 0000000200000000
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023bc00000 s85568 r8192 d20928 u524288
[    0.000000] pcpu-alloc: s85568 r8192 d20928 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2028966
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.5-201.fc19.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora/root rhgb quiet LANG=en_US.UTF-8
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 8021904k/9371648k available (6445k kernel code, 1125828k absent, 223916k reserved, 6815k data, 1412k init)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:8448 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 2660.166 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.33 BogoMIPS (lpj=2660166)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000034] Security Framework initialized
[    0.000042] SELinux:  Initializing.
[    0.000050] SELinux:  Starting in permissive mode
[    0.000630] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002523] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003353] Mount-cache hash table entries: 256
[    0.003534] Initializing cgroup subsys memory
[    0.003544] Initializing cgroup subsys devices
[    0.003546] Initializing cgroup subsys freezer
[    0.003547] Initializing cgroup subsys net_cls
[    0.003549] Initializing cgroup subsys blkio
[    0.003550] Initializing cgroup subsys perf_event
[    0.003574] CPU: Physical Processor ID: 0
[    0.003575] CPU: Processor Core ID: 0
[    0.003580] mce: CPU supports 9 MCE banks
[    0.003588] CPU0: Thermal monitoring handled by SMI
[    0.003597] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[    0.003671] Freeing SMP alternatives: 24k freed
[    0.004651] ACPI: Core revision 20130328
[    0.008126] ACPI: All ACPI Tables successfully acquired
[    0.016436] ftrace: allocating 24746 entries in 97 pages
[    0.027090] dmar: Host address width 36
[    0.027093] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.027099] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[    0.027100] dmar: DRHD base: 0x000000fed93000 flags: 0x1
[    0.027103] dmar: IOMMU 1: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[    0.027104] dmar: RMRR base: 0x000000bf6e9000 end: 0x000000bf6fffff
[    0.027592] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.037596] smpboot: CPU0: Intel(R) Core(TM) i7 CPU       M 620  @ 2.67GHz (fam: 06, model: 25, stepping: 02)
[    0.139171] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.139177] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.139178] ... version:                3
[    0.139179] ... bit width:              48
[    0.139180] ... generic registers:      4
[    0.139181] ... value mask:             0000ffffffffffff
[    0.139182] ... max period:             000000007fffffff
[    0.139182] ... fixed-purpose events:   3
[    0.139183] ... event mask:             000000070000000f
[    0.151308] CPU1: Thermal monitoring handled by SMI
[    0.153475] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.164599] CPU2: Thermal monitoring handled by SMI
[    0.140270] smpboot: Booting Node   0, Processors  #1 #2 #3 OK
[    0.177933] CPU3: Thermal monitoring handled by SMI
[    0.180046] Brought up 4 CPUs
[    0.180050] smpboot: Total of 4 processors activated (21281.32 BogoMIPS)
[    0.182540] devtmpfs: initialized
[    0.182736] PM: Registering ACPI NVS region [mem 0xbf470000-0xbf4f0fff] (528384 bytes)
[    0.182746] PM: Registering ACPI NVS region [mem 0xbf77f000-0xbf79efff] (131072 bytes)
[    0.183544] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.183568] RTC time: 20:25:35, date: 08/11/13
[    0.183606] NET: Registered protocol family 16
[    0.183752] ACPI: bus type PCI registered
[    0.183755] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.183810] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.183813] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.205507] PCI: Using configuration type 1 for base access
[    0.206178] bio: create slab <bio-0> at 0
[    0.206267] ACPI: Added _OSI(Module Device)
[    0.206268] ACPI: Added _OSI(Processor Device)
[    0.206269] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.206271] ACPI: Added _OSI(Processor Aggregator Device)
[    0.207121] ACPI: EC: Look up EC in DSDT
[    0.210436] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.210686] ACPI: SSDT 00000000bf71aa18 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.210893] ACPI: Dynamic OEM Table Load:
[    0.210895] ACPI: SSDT           (null) 00474 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.210988] ACPI: SSDT 00000000bf718018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.211182] ACPI: Dynamic OEM Table Load:
[    0.211184] ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.217382] ACPI: SSDT 00000000bf719a98 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.217619] ACPI: Dynamic OEM Table Load:
[    0.217620] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.220275] ACPI: SSDT 00000000bf717d98 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.220487] ACPI: Dynamic OEM Table Load:
[    0.220489] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.223627] ACPI: Interpreter enabled
[    0.223633] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[    0.223636] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.223648] ACPI: (supports S0 S3 S4 S5)
[    0.223649] ACPI: Using IOAPIC for interrupt routing
[    0.223667] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.223741] ACPI: No dock devices found.
[    0.224043] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.224055] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.235367] ACPI: Power Resource [QFAN] (off)
[    0.235829] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.235857] \_SB_.PCI0:_OSC invalid UUID
[    0.235858] _OSC request data:1 8 0 
[    0.236389] PCI host bridge to bus 0000:00
[    0.236392] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.236394] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.236395] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.236397] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.236398] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.236400] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.236401] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
[    0.236409] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.236424] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.236482] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    0.236510] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.236562] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.236588] pci 0000:00:16.0: reg 10: [mem 0xf0c04000-0xf0c0400f 64bit]
[    0.236676] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.236748] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.236766] pci 0000:00:1a.0: reg 10: [mem 0xf0c06000-0xf0c063ff]
[    0.236841] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.236862] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.236891] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.236903] pci 0000:00:1b.0: reg 10: [mem 0xf0c00000-0xf0c03fff 64bit]
[    0.236958] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.236998] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.237054] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.237099] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.237154] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.237202] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.237258] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.237302] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.237358] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.237410] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.237428] pci 0000:00:1d.0: reg 10: [mem 0xf0c07000-0xf0c073ff]
[    0.237503] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.237534] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.237558] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.237628] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    0.237754] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[    0.237769] pci 0000:00:1f.2: reg 10: [io  0x1830-0x1837]
[    0.237776] pci 0000:00:1f.2: reg 14: [io  0x1824-0x1827]
[    0.237782] pci 0000:00:1f.2: reg 18: [io  0x1828-0x182f]
[    0.237788] pci 0000:00:1f.2: reg 1c: [io  0x1820-0x1823]
[    0.237794] pci 0000:00:1f.2: reg 20: [io  0x1800-0x181f]
[    0.237800] pci 0000:00:1f.2: reg 24: [mem 0xf0c08000-0xf0c087ff]
[    0.237837] pci 0000:00:1f.2: PME# supported from D3hot
[    0.237890] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.237902] pci 0000:00:1f.3: reg 10: [mem 0xf0c09000-0xf0c090ff 64bit]
[    0.237919] pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
[    0.237988] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.238007] pci 0000:00:1f.6: reg 10: [mem 0xf0c0a000-0xf0c0afff 64bit]
[    0.238156] pci 0000:01:00.0: [1002:9480] type 00 class 0x030000
[    0.238170] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.238177] pci 0000:01:00.0: reg 14: [io  0x2000-0x20ff]
[    0.238184] pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
[    0.238205] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.238232] pci 0000:01:00.0: supports D1 D2
[    0.238269] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
[    0.238279] pci 0000:01:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
[    0.238334] pci 0000:01:00.1: supports D1 D2
[    0.238378] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.238380] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.238382] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    0.238385] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.238430] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.238433] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.238435] pci 0000:00:1c.0:   bridge window [mem 0xf0700000-0xf07fffff]
[    0.238440] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.238499] pci 0000:04:00.0: [168c:002b] type 00 class 0x028000
[    0.238519] pci 0000:04:00.0: reg 10: [mem 0xf0900000-0xf090ffff 64bit]
[    0.238613] pci 0000:04:00.0: supports D1
[    0.238614] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[    0.240188] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.240194] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.240200] pci 0000:00:1c.1:   bridge window [mem 0xf0900000-0xf09fffff]
[    0.240208] pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.240293] acpiphp: Slot [1] registered
[    0.240299] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[    0.240302] pci 0000:00:1c.4:   bridge window [io  0x5000-0x5fff]
[    0.240304] pci 0000:00:1c.4:   bridge window [mem 0xf0800000-0xf08fffff]
[    0.240309] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.240369] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
[    0.240384] pci 0000:08:00.0: reg 10: [io  0x6000-0x60ff]
[    0.240409] pci 0000:08:00.0: reg 18: [mem 0xf0604000-0xf0604fff 64bit pref]
[    0.240425] pci 0000:08:00.0: reg 20: [mem 0xf0600000-0xf0603fff 64bit pref]
[    0.240492] pci 0000:08:00.0: supports D1 D2
[    0.240493] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.240521] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.242189] pci 0000:00:1c.5: PCI bridge to [bus 08]
[    0.242195] pci 0000:00:1c.5:   bridge window [io  0x6000-0x6fff]
[    0.242205] pci 0000:00:1c.5:   bridge window [mem 0xf0600000-0xf06fffff 64bit pref]
[    0.242292] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[    0.242300] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.242301] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.242302] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.242304] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.242305] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.242307] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[    0.242355] \_SB_.PCI0:_OSC invalid UUID
[    0.242356] _OSC request data:1 1f 0 
[    0.242359] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.242361] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.242616] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.242658] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.242700] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.242741] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.242781] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.242822] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.242862] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.242902] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.245305] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.245357] PCI host bridge to bus 0000:ff
[    0.245359] pci_bus 0000:ff: root bus resource [bus ff]
[    0.245364] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.245396] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.245430] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.245459] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.245487] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.245516] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.245552] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.245553] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.245677] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.245683] acpi root: \_SB_.PCI0 notify handler is installed
[    0.245714] acpi root: \_SB_.CPBG notify handler is installed
[    0.245720] Found 2 acpi root devices
[    0.245738] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.245843] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.245846] vgaarb: loaded
[    0.245846] vgaarb: bridge control possible 0000:01:00.0
[    0.245905] SCSI subsystem initialized
[    0.245907] ACPI: bus type ATA registered
[    0.245939] libata version 3.00 loaded.
[    0.245955] ACPI: bus type USB registered
[    0.245966] usbcore: registered new interface driver usbfs
[    0.245974] usbcore: registered new interface driver hub
[    0.246005] usbcore: registered new device driver usb
[    0.246052] PCI: Using ACPI for IRQ routing
[    0.251203] PCI: pci_cache_line_size set to 64 bytes
[    0.251249] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[    0.251251] e820: reserve RAM buffer [mem 0xbf27c000-0xbfffffff]
[    0.251253] e820: reserve RAM buffer [mem 0xbf3ed000-0xbfffffff]
[    0.251254] e820: reserve RAM buffer [mem 0xbf46f000-0xbfffffff]
[    0.251256] e820: reserve RAM buffer [mem 0xbf717000-0xbfffffff]
[    0.251257] e820: reserve RAM buffer [mem 0xbf77f000-0xbfffffff]
[    0.251258] e820: reserve RAM buffer [mem 0xbf7e3000-0xbfffffff]
[    0.251259] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.251333] NetLabel: Initializing
[    0.251334] NetLabel:  domain hash size = 128
[    0.251335] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.251344] NetLabel:  unlabeled traffic allowed by default
[    0.251390] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.251394] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.253406] Switching to clocksource hpet
[    0.257740] pnp: PnP ACPI init
[    0.257757] ACPI: bus type PNP registered
[    0.257829] pnp 00:00: [dma 4]
[    0.257850] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.257868] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.257961] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.257985] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.258032] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.258034] system 00:04: [io  0x0500-0x050f] has been reserved
[    0.258035] system 00:04: [io  0x0600-0x0603] has been reserved
[    0.258037] system 00:04: [io  0xffff] has been reserved
[    0.258038] system 00:04: [io  0x0400-0x047f] has been reserved
[    0.258040] system 00:04: [io  0x1180-0x11ff] has been reserved
[    0.258041] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.258043] system 00:04: [io  0xfe00] has been reserved
[    0.258045] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.258088] system 00:05: [io  0x06a0-0x06af] has been reserved
[    0.258090] system 00:05: [io  0x06b0-0x06ff] has been reserved
[    0.258092] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.258126] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.258165] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.258203] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.258454] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.258456] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.258458] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.258463] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.258465] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.258467] system 00:09: [mem 0xfeaff000-0xfeafffff] has been reserved
[    0.258468] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.258470] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.258472] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.258473] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.258475] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    0.258477] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.258479] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.261891] pnp: PnP ACPI: found 10 devices
[    0.261893] ACPI: bus type PNP unregistered
[    0.267864] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 400000
[    0.267874] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[    0.267878] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[    0.267881] pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[    0.267884] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.267887] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.267889] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    0.267892] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.267895] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.267897] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.267900] pci 0000:00:1c.0:   bridge window [mem 0xf0700000-0xf07fffff]
[    0.267903] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.267908] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.267910] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.267913] pci 0000:00:1c.1:   bridge window [mem 0xf0900000-0xf09fffff]
[    0.267916] pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.267921] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[    0.267923] pci 0000:00:1c.4:   bridge window [io  0x5000-0x5fff]
[    0.267926] pci 0000:00:1c.4:   bridge window [mem 0xf0800000-0xf08fffff]
[    0.267929] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.267934] pci 0000:00:1c.5: PCI bridge to [bus 08]
[    0.267936] pci 0000:00:1c.5:   bridge window [io  0x6000-0x6fff]
[    0.267939] pci 0000:00:1c.5:   bridge window [mem 0xc0000000-0xc03fffff]
[    0.267942] pci 0000:00:1c.5:   bridge window [mem 0xf0600000-0xf06fffff 64bit pref]
[    0.267947] pci 0000:00:1e.0: PCI bridge to [bus 09]
[    0.268321] pci 0000:00:1e.0: setting latency timer to 64
[    0.268325] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.268326] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.268328] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.268329] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.268330] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.268332] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfeafffff]
[    0.268333] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.268335] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
[    0.268336] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.268338] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.268339] pci_bus 0000:02: resource 1 [mem 0xf0700000-0xf07fffff]
[    0.268340] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.268342] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.268343] pci_bus 0000:04: resource 1 [mem 0xf0900000-0xf09fffff]
[    0.268345] pci_bus 0000:04: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.268346] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
[    0.268348] pci_bus 0000:06: resource 1 [mem 0xf0800000-0xf08fffff]
[    0.268349] pci_bus 0000:06: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.268351] pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
[    0.268352] pci_bus 0000:08: resource 1 [mem 0xc0000000-0xc03fffff]
[    0.268353] pci_bus 0000:08: resource 2 [mem 0xf0600000-0xf06fffff 64bit pref]
[    0.268355] pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
[    0.268356] pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
[    0.268358] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[    0.268359] pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.268360] pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.268362] pci_bus 0000:09: resource 9 [mem 0xc0000000-0xfeafffff]
[    0.268398] NET: Registered protocol family 2
[    0.268596] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.268907] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.269156] TCP: Hash tables configured (established 65536 bind 65536)
[    0.269187] TCP: reno registered
[    0.269199] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.269251] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.269354] NET: Registered protocol family 1
[    0.269728] pci 0000:01:00.0: Boot video device
[    0.269743] PCI: CLS 64 bytes, default 64
[    0.269783] Unpacking initramfs...
[    0.404277] Freeing initrd memory: 9724k freed
[    0.406329] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.406337] software IO TLB [mem 0xbb27c000-0xbf27c000] (64MB) mapped at [ffff8800bb27c000-ffff8800bf27bfff]
[    0.406394] Simple Boot Flag at 0x36 set to 0x1
[    0.408480] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    0.408686] Initialise system trusted keyring
[    0.408726] audit: initializing netlink socket (disabled)
[    0.408744] type=2000 audit(1376252735.290:1): initialized
[    0.426188] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.427333] VFS: Disk quotas dquot_6.5.2
[    0.427367] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.427656] msgmni has been set to 15686
[    0.427703] SELinux:  Registering netfilter hooks
[    0.428083] alg: No test for stdrng (krng)
[    0.428088] NET: Registered protocol family 38
[    0.428091] Key type asymmetric registered
[    0.428093] Asymmetric key parser 'x509' registered
[    0.428094] Asymmetric key parser 'pefile' registered
[    0.428123] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.428147] io scheduler noop registered
[    0.428149] io scheduler deadline registered
[    0.428169] io scheduler cfq registered (default)
[    0.428262] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.428417] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.428427] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.428486] intel_idle: MWAIT substates: 0x1120
[    0.428487] intel_idle: v0.4 model 0x25
[    0.428488] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.428629] ACPI: AC Adapter [ACAD] (off-line)
[    0.428712] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.428716] ACPI: Power Button [PWRB]
[    0.428741] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.429381] ACPI: Lid Switch [LID0]
[    0.429414] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.429416] ACPI: Power Button [PWRF]
[    0.429470] ACPI: Fan [FAN] (off)
[    0.429511] ACPI: Requesting acpi_cpufreq
[    0.434859] ACPI: EC: GPE storm detected(10 GPEs), transactions will use polling mode
[    0.449496] thermal LNXTHERM:00: registered as thermal_zone0
[    0.449498] ACPI: Thermal Zone [THRM] (54 C)
[    0.449514] GHES: HEST is not enabled!
[    0.449571] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.449970] Non-volatile memory driver v1.3
[    0.449972] Linux agpgart interface v0.103
[    0.450527] loop: module loaded
[    0.450571] ahci 0000:00:1f.2: version 3.0
[    0.450690] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    0.450721] ahci: SSS flag set, parallel bus scan disabled
[    0.461467] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.461470] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.461474] ahci 0000:00:1f.2: setting latency timer to 64
[    0.467730] scsi0 : ahci
[    0.467795] scsi1 : ahci
[    0.467836] scsi2 : ahci
[    0.467877] scsi3 : ahci
[    0.467916] scsi4 : ahci
[    0.467956] scsi5 : ahci
[    0.467992] ata1: SATA max UDMA/133 abar m2048@0xf0c08000 port 0xf0c08100 irq 41
[    0.467994] ata2: SATA max UDMA/133 abar m2048@0xf0c08000 port 0xf0c08180 irq 41
[    0.467995] ata3: DUMMY
[    0.467996] ata4: DUMMY
[    0.467998] ata5: SATA max UDMA/133 abar m2048@0xf0c08000 port 0xf0c08300 irq 41
[    0.467999] ata6: SATA max UDMA/133 abar m2048@0xf0c08000 port 0xf0c08380 irq 41
[    0.468054] libphy: Fixed MDIO Bus: probed
[    0.468095] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.468097] ehci-pci: EHCI PCI platform driver
[    0.468200] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.468208] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.468243] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.468255] ehci-pci 0000:00:1a.0: debug port 2
[    0.472222] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.472236] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0c06000
[    0.477454] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.477473] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.477474] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.477476] usb usb1: Product: EHCI Host Controller
[    0.477477] usb usb1: Manufacturer: Linux 3.10.5-201.fc19.x86_64 ehci_hcd
[    0.477479] usb usb1: SerialNumber: 0000:00:1a.0
[    0.477561] hub 1-0:1.0: USB hub found
[    0.477565] hub 1-0:1.0: 3 ports detected
[    0.477712] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.477717] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.477753] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.477763] ehci-pci 0000:00:1d.0: debug port 2
[    0.481718] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.481732] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0c07000
[    0.487449] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.487461] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.487463] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.487464] usb usb2: Product: EHCI Host Controller
[    0.487465] usb usb2: Manufacturer: Linux 3.10.5-201.fc19.x86_64 ehci_hcd
[    0.487467] usb usb2: SerialNumber: 0000:00:1d.0
[    0.487536] hub 2-0:1.0: USB hub found
[    0.487538] hub 2-0:1.0: 3 ports detected
[    0.487600] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.487606] uhci_hcd: USB Universal Host Controller Interface driver
[    0.487642] usbcore: registered new interface driver usbserial
[    0.487646] usbcore: registered new interface driver usbserial_generic
[    0.487651] usbserial: USB Serial support registered for generic
[    0.487673] i8042: PNP: PS/2 Controller [PNP0303:KBUS,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.508879] i8042: Detected active multiplexing controller, rev 1.1
[    0.516507] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.516512] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.516520] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.516521] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.516523] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.516617] mousedev: PS/2 mouse device common for all mice
[    0.516734] rtc_cmos 00:06: RTC can wake from S4
[    0.516845] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.516870] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.516917] device-mapper: uevent: version 1.0.3
[    0.516962] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
[    0.517036] cpuidle: using governor ladder
[    0.517097] cpuidle: using governor menu
[    0.517256] hidraw: raw HID events driver (C) Jiri Kosina
[    0.517312] usbcore: registered new interface driver usbhid
[    0.517313] usbhid: USB HID core driver
[    0.517332] drop_monitor: Initializing network drop monitor service
[    0.517400] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.517425] TCP: cubic registered
[    0.517427] Initializing XFRM netlink socket
[    0.517520] NET: Registered protocol family 10
[    0.517674] mip6: Mobile IPv6
[    0.517677] NET: Registered protocol family 17
[    0.517915] PM: Hibernation image not present or could not be loaded.
[    0.517918] Loading compiled-in X.509 certificates
[    0.519859] Loaded X.509 cert 'Fedora kernel signing key: f089165db12c1df49cd666f6b477f294495e3158'
[    0.519879] registered taskstats version 1
[    0.520847]   Magic number: 9:335:447
[    0.520986] rtc_cmos 00:06: setting system clock to 2013-08-11 20:25:35 UTC (1376252735)
[    0.575195] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.774578] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.779583] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.785718] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    0.786520] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
[    0.786527] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.795692] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    0.797012] ata1.00: configured for UDMA/133
[    0.895295] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    0.895301] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.895680] hub 1-1:1.0: USB hub found
[    0.895903] hub 1-1:1.0: 6 ports detected
[    1.001539] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.116036] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.116042] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.116479] hub 2-1:1.0: USB hub found
[    1.116660] hub 2-1:1.0: 8 ports detected
[    1.191688] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.408667] tsc: Refined TSC clocksource calibration: 2659.998 MHz
[    1.408674] Switching to clocksource tsc
[    1.421573] usb 1-1.1: New USB device found, idVendor=0408, idProduct=1fc3
[    1.421579] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.421583] usb 1-1.1: Product: USB Webcam
[    1.421586] usb 1-1.1: Manufacturer: QCM
[    1.421589] usb 1-1.1: SerialNumber: SN001
[    1.485827] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[    1.631793] ACPI: Battery Slot [BAT1] (battery present)
[    1.632191] scsi 0:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.22 PQ: 0 ANSI: 5
[    1.632410] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.632436] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.632543] sd 0:0:0:0: [sda] Write Protect is off
[    1.632545] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.632561] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.635413]  sda: sda1
[    1.635773] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.655227] usb 1-1.2: New USB device found, idVendor=1690, idProduct=0741
[    1.655234] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.729843] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    1.823495] usb 2-1.5: New USB device found, idVendor=045e, idProduct=0745
[    1.823501] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.823505] usb 2-1.5: Product: Microsoft® Nano Transceiver v2.0
[    1.823509] usb 2-1.5: Manufacturer: Microsoft
[    1.828000] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4
[    1.828294] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.5/input0
[    1.834075] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input5
[    1.834457] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.5/input1
[    1.852997] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/input/input6
[    1.853494] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.5/input2
[    1.938686] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.957785] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633B, FU02, max UDMA/100
[    1.957794] ata2.00: applying bridge limits
[    1.978806] ata2.00: configured for UDMA/100
[    1.985625] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633B  FU02 PQ: 0 ANSI: 5
[    1.993396] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.993402] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.993623] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.993737] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.088644] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 568746
[    2.149196] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[    2.299720] ata5: SATA link down (SStatus 0 SControl 300)
[    2.604744] ata6: SATA link down (SStatus 0 SControl 300)
[    2.606521] Freeing unused kernel memory: 1412k freed
[    2.606835] Write protecting the kernel read-only data: 12288k
[    2.614197] Freeing unused kernel memory: 1736k freed
[    2.619619] Freeing unused kernel memory: 1284k freed
[    2.626057] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    2.626143] systemd[1]: Running in initial RAM disk.
[    2.626241] systemd[1]: Set hostname to <fedoraki>.
[    2.631606] systemd[1]: Expecting device dev-mapper-fedora\x2droot.device...
[    2.631617] systemd[1]: Expecting device dev-mapper-fedora\x2dswap.device...
[    2.631623] systemd[1]: Starting Timers.
[    2.631631] systemd[1]: Reached target Timers.
[    2.631685] systemd[1]: Starting udev Kernel Socket.
[    2.631711] systemd[1]: Listening on udev Kernel Socket.
[    2.631746] systemd[1]: Starting udev Control Socket.
[    2.631768] systemd[1]: Listening on udev Control Socket.
[    2.631775] systemd[1]: Starting Journal Socket.
[    2.631805] systemd[1]: Listening on Journal Socket.
[    2.631932] systemd[1]: Starting dracut cmdline hook...
[    2.632444] systemd[1]: Started Load Kernel Modules.
[    2.632453] systemd[1]: Starting Sockets.
[    2.632461] systemd[1]: Reached target Sockets.
[    2.632467] systemd[1]: Starting Journal Service...
[    2.632915] systemd[1]: Started Journal Service.
[    2.634434] systemd[1]: Starting Swap.
[    2.634459] systemd[1]: Reached target Swap.
[    2.634477] systemd[1]: Starting Local File Systems.
[    2.634493] systemd[1]: Reached target Local File Systems.
[    2.839017] systemd-udevd[185]: starting version 204
[    2.952393] [drm] Initialized drm 1.1.0 20060810
[    2.979031] [drm] radeon kernel modesetting enabled.
[    2.979359] [drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x10CF:0x1615).
[    2.979396] [drm] register mmio base: 0xCFEF0000
[    2.979399] [drm] register mmio size: 65536
[    2.979474] ATOM BIOS: BR37696.002
[    2.979525] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    2.979527] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    2.980959] [drm] Detected VRAM RAM=1024M, BAR=256M
[    2.980964] [drm] RAM width 128bits DDR
[    2.983236] [TTM] Zone  kernel: Available graphics memory: 4018042 kiB
[    2.983238] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.983240] [TTM] Initializing pool allocator
[    2.983250] [TTM] Initializing DMA pool allocator
[    2.983286] [drm] radeon: 1024M of VRAM memory ready
[    2.983288] [drm] radeon: 512M of GTT memory ready.
[    2.983495] radeon 0000:01:00.0: ffff88022db4e800 unpin not necessary
[    3.074551] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc9001143a598
[    3.074564] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.075351] [drm] Loading RV730 Microcode
[    3.093241] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    3.093310] radeon 0000:01:00.0: WB enabled
[    3.093312] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022d1f2c00
[    3.093314] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88022d1f2c0c
[    3.094803] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000015e598 and cpu addr 0xffffc90011c9c598
[    3.094807] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.094808] [drm] Driver supports precise vblank timestamp query.
[    3.094831] radeon 0000:01:00.0: irq 42 for MSI/MSI-X
[    3.094841] radeon 0000:01:00.0: radeon: using MSI.
[    3.094871] [drm] radeon: irq initialized.
[    3.141544] [drm] ring test on 0 succeeded in 1 usecs
[    3.141605] [drm] ring test on 3 succeeded in 1 usecs
[    4.317060] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[    5.337461] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[    6.357858] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[    7.378294] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[    7.398376] [drm] ring test on 5 succeeded in 1 usecs
[    7.398442] [drm] UVD initialized successfully.
[    7.398890] [drm] ib test on ring 0 succeeded in 0 usecs
[    7.398920] [drm] ib test on ring 3 succeeded in 0 usecs
[   17.550190] radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec
[   17.550263] radeon 0000:01:00.0: GPU lockup (waiting for 0x0000000000000002 last fence id 0x0000000000000000)
[   17.550268] [drm:r600_uvd_ib_test] *ERROR* radeon: fence wait failed (-35).
[   17.550336] [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35).
[   17.550722] [drm] Radeon Display Connectors
[   17.550724] [drm] Connector 0:
[   17.550725] [drm]   VGA-1
[   17.550726] [drm]   DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[   17.550727] [drm]   Encoders:
[   17.550728] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   17.550729] [drm] Connector 1:
[   17.550730] [drm]   HDMI-A-1
[   17.550730] [drm]   HPD1
[   17.550732] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   17.550732] [drm]   Encoders:
[   17.550733] [drm]     DFP1: INTERNAL_UNIPHY
[   17.550734] [drm] Connector 2:
[   17.550735] [drm]   LVDS-1
[   17.550736] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[   17.550736] [drm]   Encoders:
[   17.550737] [drm]     LCD1: INTERNAL_UNIPHY2
[   17.550778] [drm] Internal thermal controller with fan control
[   17.550827] [drm] radeon: power management initialized
[   17.966500] [drm] fb mappable at 0xD0361000
[   17.966504] [drm] vram apper at 0xD0000000
[   17.966507] [drm] size 4325376
[   17.966509] [drm] fb depth is 24
[   17.966511] [drm]    pitch is 5632
[   17.966690] fbcon: radeondrmfb (fb0) is primary device
[   18.227551] Console: switching to colour frame buffer device 170x48
[   18.232774] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   18.232777] radeon 0000:01:00.0: registered panic notifier
[   18.232794] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 0
[   18.313343] bio: create slab <bio-1> at 1
[   18.368380] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   18.412064] systemd-journald[97]: Received SIGTERM
[   18.485031] type=1404 audit(1376252753.460:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[   18.837142] SELinux: 2048 avtab hash slots, 94586 rules.
[   18.869790] SELinux: 2048 avtab hash slots, 94586 rules.
[   19.341634] SELinux:  8 users, 82 roles, 4525 types, 254 bools, 1 sens, 1024 cats
[   19.341642] SELinux:  83 classes, 94586 rules
[   19.352557] SELinux:  Completing initialization.
[   19.352561] SELinux:  Setting up existing superblocks.
[   19.352571] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[   19.352579] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[   19.352592] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[   19.352600] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[   19.352613] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   19.352708] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[   19.354266] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[   19.354279] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[   19.355256] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[   19.355266] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[   19.355284] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[   19.355320] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[   19.355332] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[   19.355347] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[   19.355363] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[   19.355784] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[   19.355789] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   19.355801] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   19.355961] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   19.356028] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   19.356039] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[   19.356042] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   19.356050] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   19.356078] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   19.356088] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   19.356094] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   19.356099] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   19.356104] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   19.356115] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   19.356128] SELinux: initialized (dev dm-0, type ext4), uses xattr
[   19.373876] type=1403 audit(1376252754.349:3): policy loaded auid=4294967295 ses=4294967295
[   19.383059] systemd[1]: Successfully loaded SELinux policy in 899.916ms.
[   19.445375] systemd[1]: Relabelled /dev and /run in 35.490ms.
[   19.492986] LVM: Logical Volume autoactivation enabled.
[   19.493015] LVM: Activation generator successfully completed.
[   19.629829] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   19.644733] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   19.645457] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[   19.650381] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[   19.683727] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[   19.694848] systemd-udevd[358]: starting version 204
[   19.712175] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   19.773305] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/FUJ02B1:00/input/input8
[   19.773535] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on)
[   19.786894] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   19.787101] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input9
[   19.787180] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
[   19.788385] fujitsu_laptop: BTNI: [0x80001]
[   19.788443] fujitsu_laptop: driver 0.6.0 successfully loaded
[   19.799906] acpi device:03: registered as cooling_device5
[   19.799935] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   19.799984] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input10
[   19.824612] mei_me 0000:00:16.0: setting latency timer to 64
[   19.824657] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[   19.851731] cfg80211: Calling CRDA to update world regulatory domain
[   19.857846] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   19.858095] r8169 0000:08:00.0: irq 44 for MSI/MSI-X
[   19.858286] r8169 0000:08:00.0 eth0: RTL8168e/8111e at 0xffffc90010eb8000, 8c:73:6e:a8:d7:c9, XID 0c200000 IRQ 44
[   19.858290] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   19.858531] Bluetooth: Core ver 2.16
[   19.858550] NET: Registered protocol family 31
[   19.858552] Bluetooth: HCI device and connection manager initialized
[   19.858561] Bluetooth: HCI socket layer initialized
[   19.858564] Bluetooth: L2CAP socket layer initialized
[   19.858572] Bluetooth: SCO socket layer initialized
[   19.868753] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   19.868762] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.868766] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   19.868770] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.868772] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   19.868776] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.868777] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   19.868781] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.868782] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   19.869268] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   19.870176] media: Linux media interface: v0.10
[   19.872665] usbcore: registered new interface driver btusb
[   19.876074] Linux video capture interface: v2.00
[   19.887864] hda_codec: ALC269: SKU not ready 0x90970130
[   19.888157] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   19.888160] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.888162] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   19.888164] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
[   19.888165] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
[   19.888168] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x18
[   19.888170] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x12
[   19.888172] ALSA sound/pci/hda/patch_realtek.c:486 realtek: No valid SSID, checking pincfg 0x90970130 for NID 0x1d
[   19.888173] ALSA sound/pci/hda/patch_realtek.c:569 realtek: Enable default setup for auto mode as fallback
[   19.890225] uvcvideo: Found UVC 1.00 device USB Webcam (0408:1fc3)
[   19.895123] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   19.895850] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   19.896483] ALSA sound/pci/hda/hda_intel.c:3084 0000:01:00.1: Handle VGA-switcheroo audio client
[   19.896488] ALSA sound/pci/hda/hda_intel.c:3276 0000:01:00.1: Using LPIB position fix
[   19.896537] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[   19.897657] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   19.897822] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[   19.898883] ALSA sound/pci/hda/hda_intel.c:1763 0000:01:00.1: Enable sync_write for stable communication
[   19.899147] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   19.899748] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[   19.899755] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.906898] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   19.917172] input: USB Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input14
[   19.917297] usbcore: registered new interface driver uvcvideo
[   19.917299] USB Video Class driver (1.1.1)
[   19.925695] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[   19.946600] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[   19.946916] microcode: CPU0 updated to revision 0xd, date = 2011-09-01
[   19.946926] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[   19.946957] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[   19.947208] microcode: CPU1 updated to revision 0xd, date = 2011-09-01
[   19.947216] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[   19.947247] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[   19.947502] microcode: CPU2 updated to revision 0xd, date = 2011-09-01
[   19.947739] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[   19.947767] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[   19.948017] microcode: CPU3 updated to revision 0xd, date = 2011-09-01
[   19.948232] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[   19.954622] ath: phy0: ASPM enabled: 0x42
[   19.954628] ath: EEPROM regdomain: 0x6a
[   19.954630] ath: EEPROM indicates we should expect a direct regpair map
[   19.954633] ath: Country alpha2 being used: 00
[   19.954634] ath: Regpair used: 0x6a
[   19.971083] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   19.971507] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010f60000, irq=17
[   19.971760] alg: No test for crc32 (crc32-pclmul)
[   19.999936] iTCO_vendor_support: vendor-support=0
[   20.000328] cfg80211: World regulatory domain updated:
[   20.000340] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.000343] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.000345] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.000347] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.000349] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.000350] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.001249] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   20.001284] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[   20.002666] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   20.004626] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   20.043519] systemd-udevd[386]: renamed network interface eth0 to p5p1
[   20.050451] systemd-udevd[385]: renamed network interface wlan0 to wlp4s0
[   20.061969] Adding 4505596k swap on /dev/mapper/fedora-swap.  Priority:-1 extents:1 across:4505596k SSFS
[   20.066021] cfg80211: Calling CRDA for country: GR
[   20.067774] cfg80211: Regulatory domain changed to country: GR
[   20.067777] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.067779] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.067780] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.067781] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.067782] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   20.067783] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   20.128821] type=1305 audit(1376252755.104:4): audit_pid=493 old=0 auid=4294967295 ses=4294967295
 subj=system_u:system_r:auditd_t:s0 res=1
[   20.181248] systemd[1]: Unit rngd.service entered failed state.
[   20.233089] systemd-logind[521]: Watching system buttons on /dev/input/event2 (Power Button)
[   20.233208] systemd-logind[521]: Watching system buttons on /dev/input/event8 (Fujitsu FUJ02B1)
[   20.233333] systemd-logind[521]: Watching system buttons on /dev/input/event9 (Fujitsu FUJ02E3)
[   20.233875] systemd-logind[521]: Watching system buttons on /dev/input/event10 (Video Bus)
[   20.233986] systemd-logind[521]: Watching system buttons on /dev/input/event0 (Power Button)
[   20.234093] systemd-logind[521]: Watching system buttons on /dev/input/event1 (Lid Switch)
[   20.565823] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.565827] Bluetooth: BNEP filters: protocol multicast
[   20.565840] Bluetooth: BNEP socket layer initialized
[   20.584115] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   20.593622] Bluetooth: RFCOMM TTY layer initialized
[   20.593636] Bluetooth: RFCOMM socket layer initialized
[   20.593638] Bluetooth: RFCOMM ver 1.11
[   20.604439] Ebtables v2.0 registered
[   20.684295] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   20.740531] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   20.950095] r8169 0000:08:00.0 p5p1: link down
[   20.950138] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
[   22.772437] wlp4s0: authenticate with 00:05:59:35:12:06
[   22.794227] wlp4s0: send auth to 00:05:59:35:12:06 (try 1/3)
[   22.796190] wlp4s0: authenticated
[   22.797618] wlp4s0: associate with 00:05:59:35:12:06 (try 1/3)
[   22.818718] wlp4s0: RX AssocResp from 00:05:59:35:12:06 (capab=0x431 status=0 aid=1)
[   22.818967] wlp4s0: associated
[   22.819006] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   94.078288] fuse init (API version 7.22)
[   94.080439] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   94.094368] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[  110.576049] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[  111.262888] usb 2-1.3: new high-speed USB device number 4 using ehci-pci
[  111.348864] usb 2-1.3: New USB device found, idVendor=152d, idProduct=2329
[  111.348872] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[  111.348876] usb 2-1.3: Product: USB to ATA/ATAPI bridge
[  111.348880] usb 2-1.3: Manufacturer: JMicron
[  111.348883] usb 2-1.3: SerialNumber: 7D57831A80E8
[  111.385949] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[  111.386574] usb-storage 2-1.3:1.0: Quirks match for vid 152d pid 2329: 8020
[  111.386592] scsi6 : usb-storage 2-1.3:1.0
[  111.386696] usbcore: registered new interface driver usb-storage
[  112.416057] scsi 6:0:0:0: Direct-Access     WDC WD50 00BEVT-16A0RT0   01.0 PQ: 0 ANSI: 2 CCS
[  112.416771] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  112.417115] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[  112.418100] sd 6:0:0:0: [sdb] Write Protect is off
[  112.418105] sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00
[  112.420475] sd 6:0:0:0: [sdb] No Caching mode page present
[  112.420481] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  112.424846] sd 6:0:0:0: [sdb] No Caching mode page present
[  112.424854] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  112.435378]  sdb: sdb1
[  112.438619] sd 6:0:0:0: [sdb] No Caching mode page present
[  112.438629] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  112.440007] sd 6:0:0:0: [sdb] Attached SCSI disk
[  139.960675] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[  164.703732] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

 

 

 

Θέλοντας να εστιάσω στην γραμμή 807~809 που λέει κάτι για UVD το όποιο το πετάει και όταν σβήνω το μηχάνημα...

Δεν ξέρω άμα φταίει αυτό. Μήπως έχει καμιά ιδέα γιατί γίνετε αυτό; καμιά συμβουλή για αναζήτηση;

Μην έχει κολλήσει κανένα πακέτο;

Είναι λίγο ηλίθιο να κάνω κάθε φορά reset το μηχάνημα!

 

Μιλάω για το λάπτοπ της υπογραφής.

Ευχαριστώ εκ των προτέρων!

[mphxths]

αν και αυτο που αναφερεις ειναι error στο τελος καταληγει ως

 

[drm] UVD initialized successfully.

 

οποτε το ληγει το θεμα επιτυχως...αν και το εν λογω προβλημα το βλεπω στο google να το χουν αρκετοι με τον 3.10.χ κερνελ σε διαφορες διανομες..

 

ακρη δεν βλεπω καπου...εγω θα ξαναπερνουσα τους drivers της ΑΤΙ (θεωρω οτι παιζεις με τους κλειστους) και θα ξαναπερνουσα οτιδηποτε πακετο σχετικο με vdpau εχω εγκατεστημενο

 

Καποιοι μιλανε και για καποιο firmware που τους ελειπε για την ΑΤΙ... τα οποια τα βρισκεις εδω -> http://people.freedesktop.org/~agd5f/radeon_ucode/

 

 

συνηθως τους ελειπε το cypress_uvd.κλπκλπ

Τωρα αν εσενα σου λειπει , αν σου χρειαζεται και που μπαινει...δεν μπορω να ξερω

[cyberrobot]

Στις πολλές απόπειρες έβαλα ένα RV710.uvd  στο /lib/firmware/radeon. αλλά δεν έκανε τίποτα. Drivers δεν έχει για μένα γιατί η κάρτα μου είναι πρακτικά μία 4650 οπότε και δεν βγάζει πλέον.

 

Πέταξα και το Cypress_rlc.bin έλειπε και ο θεός βοηθός!

 

 

Δυστυχώς τίποτα δεν διορθώθηκε....

[mphxths]

ναι η ΑΤΙ ειναι πονεμενη ιστορια στο λινουξ.. βλεπω οτι η 4650 καθως και καποιες αλλες πλεον υποστηριζονται απο τον legacy driver και πρεπει να τρεχεις 3.4 ή προγενεστερο κερνελ και 1.11 xorg και πισω... κοινως μαλακιες..

 

τι να σου πω...αν οντως ειναι θεμα του driver..τοτε δεν βλεπω και πολλες λυσεις...

 

δοκιμασε να απεγκαταστησεις τον driver..και να δουλευει με τον "ανοιχτο"...οχι και η καλυτερη λυση...αλλα...

[cyberrobot]

με τον ανοιχτό δουλεύω και ήθελα να ξεφύγω από τα ubuntu 12.04. κρίμα και είχα τα fedora για πιο stable διανομή!