stm00192 Δημοσ. 27 Ιουνίου 2012 Δημοσ. 27 Ιουνίου 2012 To fix this: Ideally, Realtek should add back in the "surround fill" option that was there in some of their other (non-Win7) drivers. If that option is there, just check it and you should be set. You might want to try the latest drivers from the Realtek website to see if they have fixed this. As of 7/21/2010, the latest drivers (R2.50) do not have this option, at least in Windows 7 64-bit. If that option is not there: They *do* have another mode that will do this, but it may slightly affect the sound output. If you go under the "Sound Effects" tab in the audio manager, changing the "Environment" setting to "Room" will effectively cause a stereo surround upmix. (All of the modes will do a stereo upmix, but most of the other ones apply various effects that will make your music sound terrible. This one is close to neutral.) Another option -- if your motherboard's chipset supports it -- is to use Dolby upmixing. This *also* may slightly affect the sound quality, although probably less than using their effects panel. To do this, go to Control Panel->Sound, select the "Speakers" output device, and hit the "Properties" button. This should open up a tabbed window with a bunch of settings. If you have a "Dolby" tab, go to it and check the "Dolby Prologic IIx" checkbox (or whatever option is there). This will remix stereo sound into 5.1 or 7.1. If there is no "Dolby" tab, then your motherboard does not support Dolby upmixing. Another possible solution is to set all the jacks where your speakers are plugged in to "Front Speaker Output". This will cause the driver to send the same 2-channel output to all the speakers. However, this will break anything that tries to play real 5.1 or 7.1 audio, since the side and rear audio is then not going anywhere! Realtek also offers a utility on their website called "3D Soundback". This may be helpful, although it has to be configured on a per-application basis. It is also designed for Windows Vista, so it may not work properly under Win7. http://www.tomshardware.com/forum/818-63-windows-surround-sound-problem
captainrodos Δημοσ. 27 Ιουνίου 2012 Μέλος Δημοσ. 27 Ιουνίου 2012 Σε ευχαριστώ πολυ αν και κανενα απο αυτα δεν σου δινει μετα καθαρα τον ηχο αλλα thx για τον χρονο σου
duffyduck Δημοσ. 27 Ιουνίου 2012 Δημοσ. 27 Ιουνίου 2012 Ο φιλος μιλαει για stereo surround ή speaker fill, οχι για μετατροπη του σηματος σε 5.1 Η Realtek εχει σχετικη επιλογη, για ψαξε λιγο. Το ιδιο και η VIA εχει σχετικη επιλογη και λειτουργει αψογα στα Windows 7.
stm00192 Δημοσ. 27 Ιουνίου 2012 Δημοσ. 27 Ιουνίου 2012 Ο φιλος μιλαει για stereo surround ή speaker fill, οχι για μετατροπη του σηματος σε 5.1 Η Realtek εχει σχετικη επιλογη, για ψαξε λιγο. Το ιδιο και η VIA εχει σχετικη επιλογη και λειτουργει αψογα στα Windows 7. H realtek στα περισσότερα chipsets της την έχασε την επιλογή κατά την μετάβαση απο ΧΡ σε 7αρια... πολύ λίγα και κυρίως τα νεότερα το υποστηρίζουν πλεον!
Crypton-R- Δημοσ. 27 Ιουνίου 2012 Δημοσ. 27 Ιουνίου 2012 Το πρόβλημα δεν είναι στην κάρτα ήχου, αλλά στα Windows. Ένας φίλος που είχε παρόμοιο πρόβλημα το είχα ψάξει πολύ και δεν είχα βρει άκρη, οπότε του είπα πως αν θέλει να ακούγεται η μουσική από όλα τα ηχεία να βάλει τα xp, και τα έβαλε. Εγώ δεν είχα πρόβλημα όταν έβαλα τα 7 να ακούω από τα 2 ηχεία μόνο, καθώς είναι σωστά αυτά που γράφει ο stm00192. Σε κάποια φάση αγόρασα Home Cinema γιατί ψήθηκα για DTS και έτσι μόνο κατάφερα να παίζω τη μουσική από όλα τα ηχεία με το Dolby Pro Logic II.
Προτεινόμενες αναρτήσεις
Δημιουργήστε ένα λογαριασμό ή συνδεθείτε για να σχολιάσετε
Πρέπει να είστε μέλος για να αφήσετε σχόλιο
Δημιουργία λογαριασμού
Εγγραφείτε με νέο λογαριασμό στην κοινότητα μας. Είναι πανεύκολο!
Δημιουργία νέου λογαριασμούΣύνδεση
Έχετε ήδη λογαριασμό; Συνδεθείτε εδώ.
Συνδεθείτε τώρα