jeep13 Δημοσ. 21 Μαρτίου 2012 Share Δημοσ. 21 Μαρτίου 2012 εχω kubuntu 11.10 και μερικες φορες κολλαει απιστευτα(δηλαδη αργει να ανταποκριθει στις εντολες που πατω με το ποντικι) και καποιες φορες δεν φτιαχνει ουτε μετα απο επανεκινηση.τα κολληματα δε γινοντε πολυ συχνα περιπου ανα 2 με 3 μερες. εδωσα εντολη dmesg και εβγαλε το εξης κατεβατο: >[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed19000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP ProBook 4320s/1421, BIOS 68AHH Ver. F.0D 12/07/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 35bb2000 - 36dd1000 [ 0.000000] ACPI: RSDP 000f2ba0 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT bb7fe120 00084 (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.000000] ACPI: FACP bb7fc000 000F4 (v03 HPQOEM 1421 0000000F HP 00000001) [ 0.000000] ACPI: DSDT bb7d9000 1DC6B (v02 HPQOEM 1421 00000001 INTL 20060912) [ 0.000000] ACPI: FACS bb77e000 00040 [ 0.000000] ACPI: HPET bb7fb000 00038 (v01 HPQOEM 1421 00000001 HP 00000001) [ 0.000000] ACPI: APIC bb7fa000 000BC (v01 HPQOEM 1421 00000001 HP 00000001) [ 0.000000] ACPI: MCFG bb7f9000 0003C (v01 HPQOEM 1421 00000001 HP 00000001) [ 0.000000] ACPI: ASF! bb7f8000 000A0 (v32 HPQOEM 1421 00000001 HP 00000001) [ 0.000000] ACPI: SSDT bb7d6000 000CB (v01 HPQOEM SataAhci 00001000 INTL 20060912) [ 0.000000] ACPI: SSDT bb7d5000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912) [ 0.000000] ACPI: SLIC bb7d4000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: SSDT bb7d3000 0005F (v01 HPQOEM HPQNLP 00000001 INTL 20060912) [ 0.000000] ACPI: SSDT bb7d2000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.000000] ACPI: SSDT bb7d1000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) [ 0.000000] ACPI: SSDT bb7d0000 00225 (v01 PmRef ApTst 00003000 INTL 20060912) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2112MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bb800 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bafcf [ 0.000000] 0: 0x000bb7ff -> 0x000bb800 [ 0.000000] On node 0 totalpages: 765791 [ 0.000000] free_area_init_node: node 0, pgdat c17b54c0, node_mem_map f4442200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4225 pages used for memmap [ 0.000000] HighMem zone: 534353 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bc000000 (gap: bc000000:24000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f7000000 s26240 r0 d22912 u524288 [ 0.000000] pcpu-alloc: s26240 r0 d22912 u524288 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 759790 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-16-generic root=UUID=94835768-3111-4893-b37e-e7ef639a8a6b ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 12287744 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bb800) [ 0.000000] Memory: 2997796k/3072000k available (5340k kernel code, 65368k reserved, 2596k data, 696k init, 2154312k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc17c1000 - 0xc186f000 ( 696 kB) [ 0.000000] .data : 0xc1537104 - 0xc17c0140 (2596 kB) [ 0.000000] .text : 0xc1000000 - 0xc1537104 (5340 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:744 16 [ 0.000000] CPU 0 irqstacks, hard=f340a000 soft=f340c000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2533.043 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.08 BogoMIPS (lpj=10132172) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000025] Security Framework initialized [ 0.000038] AppArmor: AppArmor initialized [ 0.000040] Yama: becoming mindful. [ 0.000085] Mount-cache hash table entries: 512 [ 0.000201] Initializing cgroup subsys cpuacct [ 0.000207] Initializing cgroup subsys memory [ 0.000213] Initializing cgroup subsys devices [ 0.000215] Initializing cgroup subsys freezer [ 0.000217] Initializing cgroup subsys net_cls [ 0.000219] Initializing cgroup subsys blkio [ 0.000224] Initializing cgroup subsys perf_event [ 0.000251] CPU: Physical Processor ID: 0 [ 0.000252] CPU: Processor Core ID: 0 [ 0.000257] mce: CPU supports 9 MCE banks [ 0.000268] CPU0: Thermal monitoring enabled (TM1) [ 0.000275] using mwait in idle threads. [ 0.002061] ACPI: Core revision 20110413 [ 0.011701] ftrace: allocating 24901 entries in 49 pages [ 0.018749] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.019237] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.058897] CPU0: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz stepping 05 [ 0.164639] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. [ 0.164646] ... version: 3 [ 0.164648] ... bit width: 48 [ 0.164649] ... generic registers: 4 [ 0.164650] ... value mask: 0000ffffffffffff [ 0.164651] ... max period: 000000007fffffff [ 0.164653] ... fixed-purpose events: 3 [ 0.164654] ... event mask: 000000070000000f [ 0.164981] CPU 1 irqstacks, hard=f34ce000 soft=f34d8000 [ 0.164983] Booting Node 0, Processors #1 [ 0.164985] smpboot cpu 1: start_ip = 9b000 [ 0.175303] Initializing CPU#1 [ 0.272786] CPU 2 irqstacks, hard=f34e2000 soft=f34e4000 [ 0.272789] #2 [ 0.272790] smpboot cpu 2: start_ip = 9b000 [ 0.282934] Initializing CPU#2 [ 0.380705] CPU 3 irqstacks, hard=f350e000 soft=f3514000 [ 0.380707] #3 [ 0.380708] smpboot cpu 3: start_ip = 9b000 [ 0.390852] Initializing CPU#3 [ 0.488543] Brought up 4 CPUs [ 0.488546] Total of 4 processors activated (20265.58 BogoMIPS). [ 0.490857] devtmpfs: initialized [ 0.490985] PM: Registering ACPI NVS region at bb6cf000 (1048576 bytes) [ 0.492590] print_constraints: dummy: [ 0.492619] Time: 12:18:27 Date: 03/21/12 [ 0.492655] NET: Registered protocol family 16 [ 0.492748] Trying to unpack rootfs image as initramfs... [ 0.492750] EISA bus registered [ 0.492758] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.492760] ACPI: bus type pci registered [ 0.492821] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.492824] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.492825] PCI: Using MMCONFIG for extended config space [ 0.492827] PCI: Using configuration type 1 for base access [ 0.493546] bio: create slab <bio-0> at 0 [ 0.495677] ACPI: EC: Look up EC in DSDT [ 0.526067] ACPI: Executed 2 blocks of module-level executable AML code [ 0.572474] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.578694] ACPI: SSDT bb6c8a18 0047D (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.579183] ACPI: Dynamic OEM Table Load: [ 0.579185] ACPI: SSDT (null) 0047D (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.579316] ACPI: SSDT bb6c6018 008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.579784] ACPI: Dynamic OEM Table Load: [ 0.579787] ACPI: SSDT (null) 008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.628653] ACPI: SSDT bb6c7a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.629191] ACPI: Dynamic OEM Table Load: [ 0.629193] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.660500] ACPI: SSDT bb6c5d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.661004] ACPI: Dynamic OEM Table Load: [ 0.661006] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.846877] Freeing initrd memory: 18556k freed [ 1.120306] ACPI: Interpreter enabled [ 1.120316] ACPI: (supports S0 S3 S4 S5) [ 1.120339] ACPI: Using IOAPIC for interrupt routing [ 1.122050] ACPI: Power Resource [APPR] (off) [ 1.125876] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 1.126075] ACPI: No dock devices found. [ 1.126077] HEST: Table not found. [ 1.126081] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.126842] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.127476] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.127479] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.127481] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.127484] pci_root PNP0A08:00: host bridge window [mem 0xbc000000-0xdfffffff] [ 1.127486] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff] [ 1.127488] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] [ 1.127502] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 [ 1.127522] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 1.127542] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604 [ 1.127576] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.127579] pci 0000:00:01.0: PME# disabled [ 1.127627] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780 [ 1.127656] pci 0000:00:16.0: reg 10: [mem 0xd4604000-0xd460400f 64bit] [ 1.127752] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.127757] pci 0000:00:16.0: PME# disabled [ 1.127798] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 [ 1.127823] pci 0000:00:1a.0: reg 10: [mem 0xd4609000-0xd46093ff] [ 1.127933] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.127938] pci 0000:00:1a.0: PME# disabled [ 1.127968] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 [ 1.127989] pci 0000:00:1b.0: reg 10: [mem 0xd4600000-0xd4603fff 64bit] [ 1.128087] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.128091] pci 0000:00:1b.0: PME# disabled [ 1.128123] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 [ 1.128226] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.128231] pci 0000:00:1c.0: PME# disabled [ 1.128259] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 [ 1.128361] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.128366] pci 0000:00:1c.1: PME# disabled [ 1.128395] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604 [ 1.128497] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.128501] pci 0000:00:1c.3: PME# disabled [ 1.128531] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604 [ 1.128632] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.128637] pci 0000:00:1c.5: PME# disabled [ 1.128673] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 [ 1.128698] pci 0000:00:1d.0: reg 10: [mem 0xd4608000-0xd46083ff] [ 1.128809] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.128813] pci 0000:00:1d.0: PME# disabled [ 1.128839] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 1.128926] pci 0000:00:1f.0: [8086:3b0b] type 0 class 0x000601 [ 1.129057] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106 [ 1.129085] pci 0000:00:1f.2: reg 10: [io 0x6028-0x602f] [ 1.129096] pci 0000:00:1f.2: reg 14: [io 0x6034-0x6037] [ 1.129107] pci 0000:00:1f.2: reg 18: [io 0x6020-0x6027] [ 1.129119] pci 0000:00:1f.2: reg 1c: [io 0x6030-0x6033] [ 1.129130] pci 0000:00:1f.2: reg 20: [io 0x6000-0x601f] [ 1.129141] pci 0000:00:1f.2: reg 24: [mem 0xd4607000-0xd46077ff] [ 1.129208] pci 0000:00:1f.2: PME# supported from D3hot [ 1.129213] pci 0000:00:1f.2: PME# disabled [ 1.129267] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300 [ 1.129287] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.129301] pci 0000:01:00.0: reg 18: [mem 0xd4500000-0xd451ffff 64bit] [ 1.129312] pci 0000:01:00.0: reg 20: [io 0x5000-0x50ff] [ 1.129329] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 1.129375] pci 0000:01:00.0: supports D1 D2 [ 1.129400] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403 [ 1.129418] pci 0000:01:00.1: reg 10: [mem 0xd4520000-0xd4523fff 64bit] [ 1.129506] pci 0000:01:00.1: supports D1 D2 [ 1.129545] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.129548] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 1.129551] pci 0000:00:01.0: bridge window [mem 0xd4500000-0xd45fffff] [ 1.129554] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.129611] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.129615] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.129620] pci 0000:00:1c.0: bridge window [mem 0xd4400000-0xd44fffff] [ 1.129628] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.129685] pci 0000:00:1c.1: PCI bridge to [bus 03-43] [ 1.129689] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 1.129694] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd43fffff] [ 1.129701] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.129799] pci 0000:44:00.0: [1814:3090] type 0 class 0x000280 [ 1.129824] pci 0000:44:00.0: reg 10: [mem 0xd0300000-0xd030ffff] [ 1.136143] pci 0000:00:1c.3: PCI bridge to [bus 44-44] [ 1.136152] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) [ 1.136162] pci 0000:00:1c.3: bridge window [mem 0xd0300000-0xd03fffff] [ 1.136175] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.136258] pci 0000:45:00.0: [10ec:8168] type 0 class 0x000200 [ 1.136275] pci 0000:45:00.0: reg 10: [io 0x2000-0x20ff] [ 1.136305] pci 0000:45:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref] [ 1.136324] pci 0000:45:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref] [ 1.136336] pci 0000:45:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 1.136400] pci 0000:45:00.0: supports D1 D2 [ 1.136402] pci 0000:45:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.136407] pci 0000:45:00.0: PME# disabled [ 1.144117] pci 0000:00:1c.5: PCI bridge to [bus 45-45] [ 1.144126] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 1.144136] pci 0000:00:1c.5: bridge window [mem 0xd0200000-0xd02fffff] [ 1.144149] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 1.144244] pci 0000:00:1e.0: PCI bridge to [bus 46-46] (subtractive decode) [ 1.144249] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.144253] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] [ 1.144261] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.144264] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.144266] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.144268] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.144270] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xdfffffff] (subtractive decode) [ 1.144272] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode) [ 1.144274] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) [ 1.144306] pci_bus 0000:00: on NUMA node 0 [ 1.144310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.144568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 1.144621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.144678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.144713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 1.144771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 1.144809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 1.145262] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.146400] pci0000:00: ACPI _OSC control (0x1d) granted [ 1.151444] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff]) [ 1.151503] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600 [ 1.151523] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600 [ 1.151543] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600 [ 1.151561] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600 [ 1.151578] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600 [ 1.151596] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600 [ 1.151623] pci_bus 0000:ff: on NUMA node 0 [ 1.151629] pci0000:ff: Requesting ACPI _OSC control (0x1d) [ 1.151632] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 1.151634] ACPI _OSC control for PCIe not granted, disabling ASPM [ 1.151828] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 1.151871] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 1.151911] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 1.151951] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.151992] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 1.152031] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.152071] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.152118] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 1.152204] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.152210] vgaarb: loaded [ 1.152211] vgaarb: bridge control possible 0000:01:00.0 [ 1.152390] SCSI subsystem initialized [ 1.152445] libata version 3.00 loaded. [ 1.152479] usbcore: registered new interface driver usbfs [ 1.152488] usbcore: registered new interface driver hub [ 1.152509] usbcore: registered new device driver usb [ 1.152580] PCI: Using ACPI for IRQ routing [ 1.162448] PCI: pci_cache_line_size set to 64 bytes [ 1.162525] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 1.162527] reserve RAM buffer: 00000000bafcf000 - 00000000bbffffff [ 1.162529] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff [ 1.162612] NetLabel: Initializing [ 1.162614] NetLabel: domain hash size = 128 [ 1.162615] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.162624] NetLabel: unlabeled traffic allowed by default [ 1.162667] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.162673] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.164695] Switching to clocksource hpet [ 1.168091] Switched to NOHz mode on CPU #0 [ 1.168168] Switched to NOHz mode on CPU #3 [ 1.168185] Switched to NOHz mode on CPU #2 [ 1.168209] Switched to NOHz mode on CPU #1 [ 1.170301] AppArmor: AppArmor Filesystem Enabled [ 1.170327] pnp: PnP ACPI init [ 1.170341] ACPI: bus type pnp registered [ 1.170706] pnp 00:00: [bus 00-fe] [ 1.170709] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.170711] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.170714] pnp 00:00: [io 0x0d00-0xffff window] [ 1.170716] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.170718] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 1.170719] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 1.170721] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 1.170723] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 1.170725] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 1.170727] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 1.170728] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 1.170730] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 1.170732] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 1.170734] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 1.170736] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 1.170738] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 1.170739] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 1.170741] pnp 00:00: [mem 0xbc000000-0xdfffffff window] [ 1.170743] pnp 00:00: [mem 0xf0000000-0xfedfffff window] [ 1.170745] pnp 00:00: [mem 0xfee01000-0xffffffff window] [ 1.170817] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.170996] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 1.170998] pnp 00:01: [mem 0xfed10000-0xfed13fff] [ 1.171000] pnp 00:01: [mem 0xfed1b000-0xfed1bfff] [ 1.171001] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 1.171003] pnp 00:01: [mem 0xbc000000-0xbc000fff] [ 1.171005] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 1.171007] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 1.171009] pnp 00:01: [mem 0xfed90000-0xfed8ffff disabled] [ 1.171010] pnp 00:01: [mem 0xfed45000-0xfed8ffff] [ 1.171012] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 1.171058] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.171060] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 1.171062] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 1.171065] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.171067] system 00:01: [mem 0xbc000000-0xbc000fff] has been reserved [ 1.171069] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 1.171071] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.171073] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.171076] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.171079] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.171155] pnp 00:02: [io 0x0000-0x001f] [ 1.171157] pnp 00:02: [io 0x0081-0x0091] [ 1.171159] pnp 00:02: [io 0x0093-0x009f] [ 1.171160] pnp 00:02: [io 0x00c0-0x00df] [ 1.171162] pnp 00:02: [dma 4] [ 1.171190] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.171197] pnp 00:03: [mem 0xff000000-0xffffffff] [ 1.171224] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 1.171290] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 1.171319] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.171328] pnp 00:05: [io 0x00f0] [ 1.171339] pnp 00:05: [irq 13] [ 1.171367] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.171377] pnp 00:06: [io 0x002e-0x002f] [ 1.171378] pnp 00:06: [io 0x004e-0x004f] [ 1.171380] pnp 00:06: [io 0x0061] [ 1.171381] pnp 00:06: [io 0x0063] [ 1.171383] pnp 00:06: [io 0x0065] [ 1.171384] pnp 00:06: [io 0x0067] [ 1.171386] pnp 00:06: [io 0x0070] [ 1.171387] pnp 00:06: [io 0x0080] [ 1.171388] pnp 00:06: [io 0x0092] [ 1.171390] pnp 00:06: [io 0x00b2-0x00b3] [ 1.171392] pnp 00:06: [io 0x0200-0x027f] [ 1.171393] pnp 00:06: [io 0x1000-0x100f] [ 1.171395] pnp 00:06: [io 0xffff] [ 1.171396] pnp 00:06: [io 0xffff] [ 1.171398] pnp 00:06: [io 0x0400-0x047f] [ 1.171399] pnp 00:06: [io 0x0500-0x057f] [ 1.171401] pnp 00:06: [io 0xef80-0xef9f] [ 1.171447] system 00:06: [io 0x0200-0x027f] has been reserved [ 1.171449] system 00:06: [io 0x1000-0x100f] has been reserved [ 1.171451] system 00:06: [io 0xffff] has been reserved [ 1.171453] system 00:06: [io 0xffff] has been reserved [ 1.171455] system 00:06: [io 0x0400-0x047f] has been reserved [ 1.171457] system 00:06: [io 0x0500-0x057f] has been reserved [ 1.171459] system 00:06: [io 0xef80-0xef9f] has been reserved [ 1.171462] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.171469] pnp 00:07: [io 0x0070-0x0077] [ 1.171474] pnp 00:07: [irq 8] [ 1.171505] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.171514] pnp 00:08: [io 0x0060] [ 1.171516] pnp 00:08: [io 0x0064] [ 1.171520] pnp 00:08: [irq 1] [ 1.171549] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.171559] pnp 00:09: [irq 12] [ 1.171589] pnp 00:09: Plug and Play ACPI device, IDs SYN0168 SYN0100 SYN0002 PNP0f13 (active) [ 1.171796] pnp 00:0a: [irq 23] [ 1.171836] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) [ 1.171964] pnp 00:0b: [bus ff] [ 1.172007] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.172095] pnp: PnP ACPI: found 12 devices [ 1.172096] ACPI: ACPI bus type pnp unregistered [ 1.172099] PnPBIOS: Disabled by ACPI PNP [ 1.207740] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 1.207744] pci 0000:45:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 1.207748] PCI: max bus depth: 1 pci_try_num: 2 [ 1.207804] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbc100000-0xbc2fffff 64bit pref] [ 1.207808] pci 0000:01:00.0: BAR 6: assigned [mem 0xd4540000-0xd455ffff pref] [ 1.207810] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.207813] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 1.207816] pci 0000:00:01.0: bridge window [mem 0xd4500000-0xd45fffff] [ 1.207819] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.207823] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.207824] pci 0000:00:1c.0: bridge window [io disabled] [ 1.207830] pci 0000:00:1c.0: bridge window [mem 0xd4400000-0xd44fffff] [ 1.207835] pci 0000:00:1c.0: bridge window [mem pref disabled] [ 1.207842] pci 0000:00:1c.1: PCI bridge to [bus 03-43] [ 1.207845] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 1.207852] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd43fffff] [ 1.207856] pci 0000:00:1c.1: bridge window [mem 0xbc100000-0xbc2fffff 64bit pref] [ 1.207864] pci 0000:00:1c.3: PCI bridge to [bus 44-44] [ 1.207866] pci 0000:00:1c.3: bridge window [io disabled] [ 1.207872] pci 0000:00:1c.3: bridge window [mem 0xd0300000-0xd03fffff] [ 1.207876] pci 0000:00:1c.3: bridge window [mem pref disabled] [ 1.207885] pci 0000:45:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref] [ 1.207887] pci 0000:00:1c.5: PCI bridge to [bus 45-45] [ 1.207890] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 1.207896] pci 0000:00:1c.5: bridge window [mem 0xd0200000-0xd02fffff] [ 1.207901] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] [ 1.207909] pci 0000:00:1e.0: PCI bridge to [bus 46-46] [ 1.207910] pci 0000:00:1e.0: bridge window [io disabled] [ 1.207916] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff] [ 1.207921] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.207938] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.207942] pci 0000:00:01.0: setting latency timer to 64 [ 1.207952] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.207957] pci 0000:00:1c.0: setting latency timer to 64 [ 1.207964] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.207969] pci 0000:00:1c.1: setting latency timer to 64 [ 1.207979] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.207983] pci 0000:00:1c.3: setting latency timer to 64 [ 1.207991] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.207995] pci 0000:00:1c.5: setting latency timer to 64 [ 1.208003] pci 0000:00:1e.0: setting latency timer to 64 [ 1.208008] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.208009] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.208011] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.208013] pci_bus 0000:00: resource 7 [mem 0xbc000000-0xdfffffff] [ 1.208015] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff] [ 1.208017] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff] [ 1.208019] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 1.208021] pci_bus 0000:01: resource 1 [mem 0xd4500000-0xd45fffff] [ 1.208023] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.208025] pci_bus 0000:02: resource 1 [mem 0xd4400000-0xd44fffff] [ 1.208027] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff] [ 1.208029] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd43fffff] [ 1.208031] pci_bus 0000:03: resource 2 [mem 0xbc100000-0xbc2fffff 64bit pref] [ 1.208033] pci_bus 0000:44: resource 1 [mem 0xd0300000-0xd03fffff] [ 1.208035] pci_bus 0000:45: resource 0 [io 0x2000-0x2fff] [ 1.208037] pci_bus 0000:45: resource 1 [mem 0xd0200000-0xd02fffff] [ 1.208039] pci_bus 0000:45: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] [ 1.208041] pci_bus 0000:46: resource 1 [mem 0xd0100000-0xd01fffff] [ 1.208043] pci_bus 0000:46: resource 4 [io 0x0000-0x0cf7] [ 1.208045] pci_bus 0000:46: resource 5 [io 0x0d00-0xffff] [ 1.208047] pci_bus 0000:46: resource 6 [mem 0x000a0000-0x000bffff] [ 1.208049] pci_bus 0000:46: resource 7 [mem 0xbc000000-0xdfffffff] [ 1.208050] pci_bus 0000:46: resource 8 [mem 0xf0000000-0xfedfffff] [ 1.208052] pci_bus 0000:46: resource 9 [mem 0xfee01000-0xffffffff] [ 1.208083] NET: Registered protocol family 2 [ 1.208137] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.208303] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.208633] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.208778] TCP: Hash tables configured (established 131072 bind 65536) [ 1.208780] TCP reno registered [ 1.208783] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.208789] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.208868] NET: Registered protocol family 1 [ 1.208940] pci 0000:01:00.0: Boot video device [ 1.208955] PCI: CLS 64 bytes, default 64 [ 1.209366] audit: initializing netlink socket (disabled) [ 1.209375] type=2000 audit(1332332308.052:1): initialized [ 1.230885] highmem bounce pool size: 64 pages [ 1.230891] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.238891] VFS: Disk quotas dquot_6.5.2 [ 1.238959] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.239517] fuse init (API version 7.16) [ 1.239595] msgmni has been set to 1683 [ 1.240000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.240033] io scheduler noop registered [ 1.240034] io scheduler deadline registered [ 1.240046] io scheduler cfq registered (default) [ 1.240147] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.240176] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.240234] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.240285] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 1.240365] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.240415] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 1.240503] pcieport 0000:00:1c.3: setting latency timer to 64 [ 1.240554] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 1.240658] pcieport 0000:00:1c.5: setting latency timer to 64 [ 1.240709] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X [ 1.240810] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.240812] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.240813] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 1.240816] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 1.240834] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.240839] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 1.240858] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 1.240862] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 1.240880] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 1.240882] pci 0000:44:00.0: Signaling PME through PCIe PME interrupt [ 1.240887] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 1.240905] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 1.240907] pci 0000:45:00.0: Signaling PME through PCIe PME interrupt [ 1.240912] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 1.240925] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.240987] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 3b44 ss_vid 103c ss_did 1421 [ 1.241008] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 1.241021] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 3b4c ss_vid 103c ss_did 1421 [ 1.241036] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded [ 1.241041] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.241088] intel_idle: MWAIT substates: 0x1120 [ 1.241089] intel_idle: v0.4 model 0x25 [ 1.241090] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.241231] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.241319] ACPI: AC Adapter [AC] (on-line) [ 1.241502] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 1.241507] ACPI: Sleep Button [sLPB] [ 1.241539] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.241561] ACPI: Lid Switch [LID] [ 1.241591] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.241594] ACPI: Power Button [PWRF] [ 1.241619] ACPI: acpi_idle yielding to intel_idle [ 1.249721] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.249724] ACPI: Thermal Zone [EXTZ] (67 C) [ 1.249761] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.249763] ACPI: Thermal Zone [EX2Z] (0 C) [ 1.249804] thermal LNXTHERM:02: registered as thermal_zone2 [ 1.249806] ACPI: Thermal Zone [PWMZ] (0 C) [ 1.252511] thermal LNXTHERM:03: registered as thermal_zone3 [ 1.252513] ACPI: Thermal Zone [LOCZ] (69 C) [ 1.252981] thermal LNXTHERM:04: registered as thermal_zone4 [ 1.252983] ACPI: Thermal Zone [GFXZ] (0 C) [ 1.263711] thermal LNXTHERM:05: registered as thermal_zone5 [ 1.263713] ACPI: Thermal Zone [bATZ] (20 C) [ 1.273410] thermal LNXTHERM:06: registered as thermal_zone6 [ 1.273412] ACPI: Thermal Zone [EGXZ] (78 C) [ 1.273619] thermal LNXTHERM:07: registered as thermal_zone7 [ 1.273621] ACPI: Thermal Zone [CPUZ] (72 C) [ 1.273783] thermal LNXTHERM:08: registered as thermal_zone8 [ 1.273785] ACPI: Thermal Zone [MCHZ] (72 C) [ 1.273943] thermal LNXTHERM:09: registered as thermal_zone9 [ 1.273945] ACPI: Thermal Zone [PCHZ] (74 C) [ 1.273965] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.273983] ERST: Table is not found! [ 1.274033] isapnp: Scanning for PnP cards... [ 1.274057] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.274062] ACPI: Battery Slot [bAT0] (battery absent) [ 1.629217] isapnp: No Plug & Play device found [ 1.684697] Linux agpgart interface v0.103 [ 1.685708] brd: module loaded [ 1.686196] loop: module loaded [ 1.686522] Fixed MDIO Bus: probed [ 1.686540] PPP generic driver version 2.4.2 [ 1.686567] tun: Universal TUN/TAP device driver, 1.6 [ 1.686568] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.686625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.686642] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.686653] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.686657] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.686683] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.686710] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.690627] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.690643] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4609000 [ 1.704376] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.704512] hub 1-0:1.0: USB hub found [ 1.704515] hub 1-0:1.0: 2 ports detected [ 1.704573] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.704584] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.704588] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.704615] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.704640] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.708520] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.708533] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd4608000 [ 1.724371] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.724495] hub 2-0:1.0: USB hub found [ 1.724498] hub 2-0:1.0: 2 ports detected [ 1.724546] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.724555] uhci_hcd: USB Universal Host Controller Interface driver [ 1.724608] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.726297] i8042: Detected active multiplexing controller, rev 1.1 [ 1.727010] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.727016] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.727024] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.727026] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.727028] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.727146] mousedev: PS/2 mouse device common for all mice [ 1.727257] rtc_cmos 00:07: RTC can wake from S4 [ 1.727345] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.727376] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.727446] device-mapper: uevent: version 1.0.3 [ 1.727502] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected] [ 1.727525] EISA: Probing bus 0 at eisa.0 [ 1.727527] EISA: Cannot allocate resource for mainboard [ 1.727529] Cannot allocate resource for EISA slot 1 [ 1.727530] Cannot allocate resource for EISA slot 2 [ 1.727531] Cannot allocate resource for EISA slot 3 [ 1.727533] Cannot allocate resource for EISA slot 4 [ 1.727534] Cannot allocate resource for EISA slot 5 [ 1.727535] Cannot allocate resource for EISA slot 6 [ 1.727537] Cannot allocate resource for EISA slot 7 [ 1.727538] Cannot allocate resource for EISA slot 8 [ 1.727539] EISA: Detected 0 cards. [ 1.727548] cpufreq-nforce2: No nForce2 chipset. [ 1.727636] cpuidle: using governor ladder [ 1.727765] cpuidle: using governor menu [ 1.727766] EFI Variables Facility v0.08 2004-May-17 [ 1.727967] TCP cubic registered [ 1.728073] NET: Registered protocol family 10 [ 1.728507] NET: Registered protocol family 17 [ 1.728519] Registering the dns_resolver key type [ 1.728534] Using IPI No-Shortcut mode [ 1.728593] PM: Hibernation image not present or could not be loaded. [ 1.728602] registered taskstats version 1 [ 1.737563] Magic number: 4:103:330 [ 1.737602] tty tty51: hash matches [ 1.737711] rtc_cmos 00:07: setting system clock to 2012-03-21 12:18:28 UTC (1332332308) [ 1.738576] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.738578] EDD information not available. [ 1.738732] Freeing unused kernel memory: 696k freed [ 1.738909] Write protecting the kernel text: 5344k [ 1.738987] Write protecting the kernel read-only data: 2188k [ 1.749585] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.758321] udevd[90]: starting version 173 [ 1.784067] wmi: Mapper loaded [ 1.800283] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.800360] r8169 0000:45:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.801417] r8169 0000:45:00.0: setting latency timer to 64 [ 1.801485] r8169 0000:45:00.0: irq 45 for MSI/MSI-X [ 1.802450] ahci 0000:00:1f.2: version 3.0 [ 1.802472] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.802525] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 1.802571] ahci: SSS flag set, parallel bus scan disabled [ 1.802617] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode [ 1.802621] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.802628] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.802867] r8169 0000:45:00.0: eth0: RTL8168d/8111d at 0xf8060000, 98:4b:e1:94:1e:99, XID 083000c0 IRQ 45 [ 1.820527] acpi device:04: registered as cooling_device4 [ 1.821031] scsi0 : ahci [ 1.821299] scsi1 : ahci [ 1.821336] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4 [ 1.821377] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no) [ 1.821398] scsi2 : ahci [ 1.821485] scsi3 : ahci [ 1.821583] scsi4 : ahci [ 1.821672] scsi5 : ahci [ 1.821887] ata1: SATA max UDMA/133 abar m2048@0xd4607000 port 0xd4607100 irq 46 [ 1.821892] ata2: SATA max UDMA/133 abar m2048@0xd4607000 port 0xd4607180 irq 46 [ 1.821894] ata3: DUMMY [ 1.821896] ata4: DUMMY [ 1.821899] ata5: SATA max UDMA/133 abar m2048@0xd4607000 port 0xd4607300 irq 46 [ 1.821900] ata6: DUMMY [ 2.016309] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 2.140234] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.140977] ata1.00: unexpected _GTF length (8) [ 2.141242] ata1.00: ATA-8: Hitachi HTS725032A9A364, PC3OCH0A, max UDMA/100 [ 2.141248] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.142202] ata1.00: unexpected _GTF length (8) [ 2.142470] ata1.00: configured for UDMA/100 [ 2.142725] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72503 PC3O PQ: 0 ANSI: 5 [ 2.142888] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.142914] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.142972] sd 0:0:0:0: [sda] Write Protect is off [ 2.142975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.143047] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.153159] hub 1-1:1.0: USB hub found [ 2.153227] hub 1-1:1.0: 6 ports detected [ 2.208196] Refined TSC clocksource calibration: 2533.302 MHz. [ 2.208203] Switching to clocksource tsc [ 2.264186] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 2.396783] hub 2-1:1.0: USB hub found [ 2.396863] hub 2-1:1.0: 8 ports detected [ 2.460065] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.462153] ata2.00: unexpected _GTF length (8) [ 2.462159] ata2.00: ATAPI: hp CDDVDW TS-L633R, 0200, max UDMA/100 [ 2.464525] ata2.00: unexpected _GTF length (8) [ 2.464532] ata2.00: configured for UDMA/100 [ 2.465661] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633R 0200 PQ: 0 ANSI: 5 [ 2.468294] usb 1-1.5: new high speed USB device number 3 using ehci_hcd [ 2.468301] sr0: scsi3-mmc drive: 31x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.468306] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.468440] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.468488] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.473278] sda: sda1 sda2 sda3 sda4 [ 2.473690] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.787874] ata5: SATA link down (SStatus 0 SControl 300) [ 3.823530] usb 2-1.2: new low speed USB device number 3 using ehci_hcd [ 3.927813] input: HID-compliant Mouse HID-compliant Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5 [ 3.927888] generic-usb 0003:1D57:0005.0001: input,hidraw0: USB HID v1.10 Mouse [HID-compliant Mouse HID-compliant Mouse] on usb-0000:00:1d.0-1.2/input0 [ 3.927899] usbcore: registered new interface driver usbhid [ 3.927900] usbhid: USB HID core driver [ 3.991443] usb 2-1.4: new high speed USB device number 4 using ehci_hcd [ 4.101058] usbcore: registered new interface driver uas [ 4.101726] Initializing USB Mass Storage driver... [ 4.101792] usbcore: registered new interface driver usb-storage [ 4.101795] USB Mass Storage support registered. [ 4.111844] scsi6 : usb-storage 2-1.4:1.0 [ 4.111988] usbcore: registered new interface driver ums-realtek [ 4.171345] usb 2-1.6: new full speed USB device number 5 using ehci_hcd [ 4.297657] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 4.297660] vesafb: scrolling: redraw [ 4.297662] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.298949] vesafb: framebuffer at 0xc0000000, mapped to 0xf8100000, using 4160k, total 4160k [ 4.299035] fbcon: VESA VGA (fb0) is primary device [ 4.299077] Console: switching to colour frame buffer device 170x48 [ 4.299104] fb0: VESA VGA frame buffer device [ 4.611624] EXT3-fs (sda2): recovery required on readonly filesystem [ 4.611635] EXT3-fs (sda2): write access will be enabled during recovery [ 4.921475] EXT3-fs: barriers not enabled [ 5.113429] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 5.135538] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 5.139676] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 5.924166] kjournald starting. Commit interval 5 seconds [ 5.924300] EXT3-fs (sda2): orphan cleanup on readonly fs [ 5.924306] ext3_orphan_cleanup: deleting unreferenced inode 1065163 [ 6.001248] ext3_orphan_cleanup: deleting unreferenced inode 317555 [ 6.019351] ext3_orphan_cleanup: deleting unreferenced inode 388441 [ 6.052716] ext3_orphan_cleanup: deleting unreferenced inode 1064981 [ 6.160871] ext3_orphan_cleanup: deleting unreferenced inode 1064999 [ 6.171621] ext3_orphan_cleanup: deleting unreferenced inode 1474848 [ 6.171821] ext3_orphan_cleanup: deleting unreferenced inode 1474732 [ 6.171867] ext3_orphan_cleanup: deleting unreferenced inode 1064987 [ 6.171881] ext3_orphan_cleanup: deleting unreferenced inode 1064986 [ 6.171892] ext3_orphan_cleanup: deleting unreferenced inode 1064984 [ 6.171903] ext3_orphan_cleanup: deleting unreferenced inode 1064983 [ 6.171914] ext3_orphan_cleanup: deleting unreferenced inode 1064982 [ 6.171922] EXT3-fs (sda2): 12 orphan inodes deleted [ 6.171924] EXT3-fs (sda2): recovery complete [ 6.230083] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 24.283952] udevd[394]: starting version 173 [ 24.409697] Adding 5276668k swap on /dev/sda3. Priority:-1 extents:1 across:5276668k [ 24.434510] lp: driver loaded but no devices found [ 24.435614] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 24.436154] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.436162] mei 0000:00:16.0: setting latency timer to 64 [ 24.440186] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 24.440192] Disabling lock debugging due to kernel taint [ 24.443324] cfg80211: Calling CRDA to update world regulatory domain [ 24.460262] type=1400 audit(1332325131.232:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=522 comm="apparmor_parser" [ 24.460736] type=1400 audit(1332325131.232:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=522 comm="apparmor_parser" [ 24.461065] type=1400 audit(1332325131.232:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=522 comm="apparmor_parser" [ 24.469512] rt2800pci 0000:44:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 24.469524] rt2800pci 0000:44:00.0: setting latency timer to 64 [ 24.474213] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 24.474218] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474221] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 24.474224] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474226] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 24.474229] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474232] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 24.474235] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474237] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 24.474240] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474243] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 24.474246] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474248] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 24.474251] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474254] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 24.474256] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474259] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 24.474262] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474264] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 24.474270] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474272] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 24.474275] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474278] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 24.474280] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474283] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 24.474286] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.474288] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 24.474291] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm) [ 24.491051] hp_accel: hardware type HPB432x found [ 24.491717] lis3lv02d: 8 bits sensor found [ 24.493942] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 24.495193] Registered led device: rt2800pci-phy0::radio [ 24.495216] Registered led device: rt2800pci-phy0::assoc [ 24.495237] Registered led device: rt2800pci-phy0::quality [ 24.511083] Bluetooth: Core ver 2.16 [ 24.511112] NET: Registered protocol family 31 [ 24.511114] Bluetooth: HCI device and connection manager initialized [ 24.511116] Bluetooth: HCI socket layer initialized [ 24.511118] Bluetooth: L2CAP socket layer initialized [ 24.518832] Bluetooth: SCO socket layer initialized [ 24.519329] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 24.521271] usbcore: registered new interface driver btusb [ 24.556215] Linux video capture interface: v2.00 [ 24.556246] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 [ 24.556399] Registered led device: hp::hddprotect [ 24.556423] hp_accel: driver loaded [ 24.557646] uvcvideo: Found UVC 1.00 device HP Webcam [2 MP Fixed] (05c8:0403) [ 24.572232] EXT3-fs (sda2): using internal journal [ 24.581227] input: HP Webcam [2 MP Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input7 [ 24.581322] usbcore: registered new interface driver uvcvideo [ 24.581325] USB Video Class driver (v1.1.0) [ 24.588027] [fglrx] Maximum main memory to use for locked dma buffers: 2802 MBytes. [ 24.588306] [fglrx] vendor: 1002 device: 68e0 count: 1 [ 24.588758] [fglrx] ioport: bar 4, base 0x5000, size: 0x100 [ 24.588775] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.588781] pci 0000:01:00.0: setting latency timer to 64 [ 24.588998] [fglrx] Kernel PAT support is enabled [ 24.589022] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors [ 24.642455] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 24.642466] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 24.642478] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 24.642555] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 24.642591] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 24.704348] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 24.704521] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 24.704931] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 24.705009] HDA Intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 24.705036] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 24.706924] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 24.706928] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706931] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 24.706934] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706937] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 24.706940] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706943] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 24.706946] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706952] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 24.706955] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706958] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 24.706961] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706964] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 24.706966] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706969] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 24.706972] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706975] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 24.706978] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706981] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 24.706984] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706987] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 24.706990] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706993] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 24.706996] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.706999] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 24.707002] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.707004] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 24.707007] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 24.707010] cfg80211: World regulatory domain updated: [ 24.707013] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.707016] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.707019] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.707022] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.707024] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.707027] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.722948] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0 [ 24.723067] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10 [ 24.836367] input: HP WMI hotkeys as /devices/virtual/input/input11 [ 24.863943] type=1400 audit(1332325131.632:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=984 comm="apparmor_parser" [ 24.864302] type=1400 audit(1332325131.636:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=984 comm="apparmor_parser" [ 24.865163] type=1400 audit(1332325131.636:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=985 comm="apparmor_parser" [ 24.865685] type=1400 audit(1332325131.636:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=983 comm="apparmor_parser" [ 24.866426] type=1400 audit(1332325131.636:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=983 comm="apparmor_parser" [ 24.869721] type=1400 audit(1332325131.640:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=981 comm="apparmor_parser" [ 24.870088] type=1400 audit(1332325131.640:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=981 comm="apparmor_parser" [ 25.116814] init: failsafe main process (927) killed by TERM signal [ 25.118298] init: apport pre-start process (1037) terminated with status 1 [ 25.126820] init: apport post-stop process (1060) terminated with status 1 [ 25.256695] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.310585] r8169 0000:45:00.0: eth0: link down [ 25.310869] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.341471] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04733/0xe40000/0x5a0400 [ 25.385726] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 [ 25.692813] Bluetooth: RFCOMM TTY layer initialized [ 25.692819] Bluetooth: RFCOMM socket layer initialized [ 25.692821] Bluetooth: RFCOMM ver 1.11 [ 25.696151] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.696155] Bluetooth: BNEP filters: protocol multicast [ 25.858551] fglrx_pci 0000:01:00.0: irq 49 for MSI/MSI-X [ 25.859149] [fglrx] Firegl kernel thread PID: 1199 [ 25.859226] [fglrx] Firegl kernel thread PID: 1200 [ 25.859280] [fglrx] Firegl kernel thread PID: 1201 [ 25.859480] [fglrx] IRQ 49 Enabled [ 25.953347] [fglrx] Gart USWC size:920 M. [ 25.953351] [fglrx] Gart cacheable size:364 M. [ 25.953357] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 25.953360] [fglrx] Reserved FB block: Unshared offset:fa1d000, size:2e3000 [ 25.953363] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000 [ 25.998789] ppdev: user-space parallel port driver [ 31.474020] UDF-fs: Partition marked readonly; forcing readonly mount [ 31.513384] UDF-fs INFO UDF: Mounting volume 'POP2PLAY', timestamp 2004/11/07 01:50 (1078) [ 61.760992] wlan0: authenticate with 58:98:35:0b:22:74 (try 1) [ 61.762746] wlan0: authenticated [ 61.763231] wlan0: associate with 58:98:35:0b:22:74 (try 1) [ 61.769733] wlan0: RX AssocResp from 58:98:35:0b:22:74 (capab=0x411 status=0 aid=1) [ 61.769737] wlan0: associated [ 61.776663] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 72.546572] wlan0: no IPv6 routers present Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
chek2fire Δημοσ. 21 Μαρτίου 2012 Share Δημοσ. 21 Μαρτίου 2012 για δοκίμασε να πας στις ρυθμίσεις και να απενεργοποιήσεις το nepomuk καθώς και το indexing. Δες μετά και στο μπάρα με τις διεργασίες να έχεις σταματημένο και το akonadi, Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
jeep13 Δημοσ. 22 Μαρτίου 2012 Μέλος Share Δημοσ. 22 Μαρτίου 2012 οταν κολλαει να τα κανω αυτα η τωρα που παει κανονικα; τελικα με προλαβε και κολλησε απο μονο του.εκανα αυτα που λες και ξεκολλησε. Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
Προτεινόμενες αναρτήσεις
Δημιουργήστε ένα λογαριασμό ή συνδεθείτε για να σχολιάσετε
Πρέπει να είστε μέλος για να αφήσετε σχόλιο
Δημιουργία λογαριασμού
Εγγραφείτε με νέο λογαριασμό στην κοινότητα μας. Είναι πανεύκολο!
Δημιουργία νέου λογαριασμούΣύνδεση
Έχετε ήδη λογαριασμό; Συνδεθείτε εδώ.
Συνδεθείτε τώρα