Wireless USB EDIMAX EW-7711UMn & Ubuntu 10.04

[lefstef]

αυτά μου έβγαλε

 

[ 0.654481] pata_acpi 0000:00:14.1: setting latency timer to 64

[ 0.654659] Fixed MDIO Bus: probed

[ 0.654676] PPP generic driver version 2.4.2

[ 0.654695] tun: Universal TUN/TAP device driver, 1.6

[ 0.654696] tun: © 1999-2004 Max Krasnyansky <[email protected]>

[ 0.654740] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 0.654765] alloc irq_desc for 17 on node 0

[ 0.654766] alloc kstat_irqs on node 0

[ 0.654769] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[ 0.654780] ehci_hcd 0000:00:12.2: EHCI Host Controller

[ 0.654797] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1

[ 0.654823] ehci_hcd 0000:00:12.2: debug port 1

[ 0.654840] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800

[ 0.666988] Freeing initrd memory: 8133k freed

[ 0.671702] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00

[ 0.671794] usb usb1: configuration #1 chosen from 1 choice

[ 0.671810] hub 1-0:1.0: USB hub found

[ 0.671816] hub 1-0:1.0: 6 ports detected

[ 0.671904] alloc irq_desc for 19 on node 0

[ 0.671905] alloc kstat_irqs on node 0

[ 0.671909] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 0.671924] ehci_hcd 0000:00:13.2: EHCI Host Controller

[ 0.671947] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2

[ 0.671970] ehci_hcd 0000:00:13.2: debug port 1

[ 0.671988] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400

[ 0.691696] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00

[ 0.691731] usb usb2: configuration #1 chosen from 1 choice

[ 0.691745] hub 2-0:1.0: USB hub found

[ 0.691748] hub 2-0:1.0: 6 ports detected

[ 0.691807] alloc irq_desc for 22 on node 0

[ 0.691808] alloc kstat_irqs on node 0

[ 0.691811] ehci_hcd 0000:03:05.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22

[ 0.691818] ehci_hcd 0000:03:05.2: EHCI Host Controller

[ 0.691835] ehci_hcd 0000:03:05.2: new USB bus registered, assigned bus number 3

[ 0.721697] ehci_hcd 0000:03:05.2: irq 22, io mem 0xfebfdc00

[ 0.741688] ehci_hcd 0000:03:05.2: USB 2.0 started, EHCI 1.00

[ 0.741723] usb usb3: configuration #1 chosen from 1 choice

[ 0.741737] hub 3-0:1.0: USB hub found

[ 0.741740] hub 3-0:1.0: 5 ports detected

[ 0.741800] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 0.741826] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 0.741834] ohci_hcd 0000:00:12.0: OHCI Host Controller

[ 0.741852] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4

[ 0.741870] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000

[ 0.805729] usb usb4: configuration #1 chosen from 1 choice

[ 0.805746] hub 4-0:1.0: USB hub found

[ 0.805753] hub 4-0:1.0: 3 ports detected

[ 0.805819] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 0.805827] ohci_hcd 0000:00:12.1: OHCI Host Controller

[ 0.805844] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 5

[ 0.805856] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000

[ 0.865733] usb usb5: configuration #1 chosen from 1 choice

[ 0.865746] hub 5-0:1.0: USB hub found

[ 0.865752] hub 5-0:1.0: 3 ports detected

[ 0.865819] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 0.865827] ohci_hcd 0000:00:13.0: OHCI Host Controller

[ 0.865850] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6

[ 0.865866] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000

[ 0.925732] usb usb6: configuration #1 chosen from 1 choice

[ 0.925745] hub 6-0:1.0: USB hub found

[ 0.925751] hub 6-0:1.0: 3 ports detected

[ 0.925816] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 0.925823] ohci_hcd 0000:00:13.1: OHCI Host Controller

[ 0.925844] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 7

[ 0.925856] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000

[ 0.985740] usb usb7: configuration #1 chosen from 1 choice

[ 0.985752] hub 7-0:1.0: USB hub found

[ 0.985758] hub 7-0:1.0: 3 ports detected

[ 0.985826] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 0.985834] ohci_hcd 0000:00:14.5: OHCI Host Controller

[ 0.985850] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8

[ 0.985862] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fa000

[ 0.991704] usb 1-2: new high speed USB device using ehci_hcd and address 2

[ 1.045738] usb usb8: configuration #1 chosen from 1 choice

[ 1.045750] hub 8-0:1.0: USB hub found

[ 1.045757] hub 8-0:1.0: 2 ports detected

[ 1.045825] alloc irq_desc for 20 on node 0

[ 1.045826] alloc kstat_irqs on node 0

[ 1.045829] ohci_hcd 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20

[ 1.045836] ohci_hcd 0000:03:05.0: OHCI Host Controller

[ 1.045855] ohci_hcd 0000:03:05.0: new USB bus registered, assigned bus number 9

[ 1.045870] ohci_hcd 0000:03:05.0: irq 20, io mem 0xfebff000

[ 1.131748] usb usb9: configuration #1 chosen from 1 choice

[ 1.131761] hub 9-0:1.0: USB hub found

[ 1.131768] hub 9-0:1.0: 3 ports detected

[ 1.131819] alloc irq_desc for 21 on node 0

[ 1.131820] alloc kstat_irqs on node 0

[ 1.131823] ohci_hcd 0000:03:05.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21

[ 1.131831] ohci_hcd 0000:03:05.1: OHCI Host Controller

[ 1.131847] ohci_hcd 0000:03:05.1: new USB bus registered, assigned bus number 10

[ 1.131861] ohci_hcd 0000:03:05.1: irq 21, io mem 0xfebfe000

[ 1.159972] usb 1-2: configuration #1 chosen from 1 choice

[ 1.221752] usb usb10: configuration #1 chosen from 1 choice

[ 1.221765] hub 10-0:1.0: USB hub found

[ 1.221771] hub 10-0:1.0: 2 ports detected

[ 1.221803] uhci_hcd: USB Universal Host Controller Interface driver

[ 1.221853] PNP: No PS/2 controller found. Probing ports directly.

[ 1.224621] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.224625] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 1.224681] mice: PS/2 mouse device common for all mice

[ 1.224750] rtc_cmos 00:03: RTC can wake from S4

[ 1.224773] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[ 1.224792] rtc0: alarms up to one month, y3k, 114 bytes nvram

[ 1.224865] device-mapper: uevent: version 1.0.3

[ 1.224933] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]

[ 1.224996] device-mapper: multipath: version 1.1.0 loaded

[ 1.224998] device-mapper: multipath round-robin: version 1.0.0 loaded

[ 1.225126] cpuidle: using governor ladder

[ 1.225128] cpuidle: using governor menu

[ 1.225343] TCP cubic registered

[ 1.225413] NET: Registered protocol family 10

[ 1.225684] lo: Disabled Privacy Extensions

[ 1.225850] NET: Registered protocol family 17

[ 1.225885] powernow-k8: Found 1 AMD Phenom II X3 720 Processor processors (3 cpu cores) (version 2.20.00)

[ 1.225915] powernow-k8: 0 : pstate 0 (3200 MHz)

[ 1.225916] powernow-k8: 1 : pstate 1 (2100 MHz)

[ 1.225917] powernow-k8: 2 : pstate 2 (1600 MHz)

[ 1.225918] powernow-k8: 3 : pstate 3 (800 MHz)

[ 1.226113] PM: Resume from disk failed.

[ 1.226120] registered taskstats version 1

[ 1.226412] Magic number: 10:278:26

[ 1.226491] rtc_cmos 00:03: setting system clock to 2010-05-14 12:00:10 UTC (1273838410)

[ 1.226492] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 1.226493] EDD information not available.

[ 1.226522] Freeing unused kernel memory: 876k freed

[ 1.226711] Write protecting the kernel read-only data: 7680k

[ 1.236110] udev: starting version 151

[ 1.263705] ahci 0000:00:11.0: version 3.0

[ 1.263721] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[ 1.263773] alloc irq_desc for 25 on node 0

[ 1.263774] alloc kstat_irqs on node 0

[ 1.263784] ahci 0000:00:11.0: irq 25 for MSI/MSI-X

[ 1.263858] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode

[ 1.263860] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc

[ 1.268257] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 1.268275] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 1.268308] r8169 0000:02:00.0: setting latency timer to 64

[ 1.268338] alloc irq_desc for 26 on node 0

[ 1.268339] alloc kstat_irqs on node 0

[ 1.268348] r8169 0000:02:00.0: irq 26 for MSI/MSI-X

[ 1.268699] eth0: RTL8168d/8111d at 0xffffc9000066c000, 00:19:66:d3:4d:0f, XID 081000c0 IRQ 26

[ 1.279827] Floppy drive(s): fd0 is 1.44M

[ 1.295886] FDC 0 is a post-1991 82077

[ 1.311372] scsi0 : ahci

[ 1.311432] ohci1394 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[ 1.311473] scsi1 : ahci

[ 1.312616] scsi2 : ahci

[ 1.312686] scsi3 : ahci

[ 1.312714] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 25

[ 1.312717] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 25

[ 1.312720] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 25

[ 1.312723] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 25

[ 1.312879] scsi4 : pata_atiixp

[ 1.312924] scsi5 : pata_atiixp

[ 1.313735] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14

[ 1.313737] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15

[ 1.373753] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[febfd000-febfd7ff] Max Packet=[2048] IR/IT contexts=[4/8]

[ 1.511727] usb 3-1: new high speed USB device using ehci_hcd and address 2

[ 1.529556] ata5.00: ATA-8: ST31500341AS, CC1H, max UDMA/133

[ 1.529558] ata5.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 1.608226] ata5.00: configured for UDMA/100

[ 1.662128] usb 3-1: configuration #1 chosen from 1 choice

[ 1.666112] Initializing USB Mass Storage driver...

[ 1.666204] scsi6 : SCSI emulation for USB Mass Storage devices

[ 1.666250] usb-storage: device found at 2

[ 1.666251] usb-storage: waiting for device to settle before scanning

[ 1.666256] usbcore: registered new interface driver usb-storage

[ 1.666258] USB Mass Storage support registered.

[ 1.830253] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 1.830273] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 1.830289] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 1.830306] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 1.833267] ata1.00: ATA-7: WDC WD740ADFS-00SLR5, 21.07QR5, max UDMA/133

[ 1.833269] ata1.00: 145226112 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 1.833272] ata2.00: HPA unlocked: 156299375 -> 156301488, native 156301488

[ 1.833276] ata2.00: ATA-6: ST380817AS, 3.42, max UDMA/133

[ 1.833279] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (not used)

[ 1.835009] ata2.00: configured for UDMA/133

[ 1.837014] ata1.00: configured for UDMA/133

[ 1.850300] scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFS-00 21.0 PQ: 0 ANSI: 5

[ 1.850403] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 1.850417] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)

[ 1.850453] sd 0:0:0:0: [sda] Write Protect is off

[ 1.850454] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.850466] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.850535] sda:

[ 1.851398] scsi 1:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5

[ 1.851479] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)

[ 1.851497] sd 1:0:0:0: Attached scsi generic sg1 type 0

[ 1.851500] sd 1:0:0:0: [sdb] Write Protect is off

[ 1.851502] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[ 1.851513] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.851575] sdb:

[ 1.860798] ata4.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133

[ 1.860800] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)

[ 1.861127] sda1

[ 1.861246] sd 0:0:0:0: [sda] Attached SCSI disk

[ 1.863128] sdb1 sdb2 <

[ 1.864319] ata3.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133

[ 1.864320] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)

[ 1.879893] sdb5 >

[ 1.880024] sd 1:0:0:0: [sdb] Attached SCSI disk

[ 1.910243] usb 3-4: new high speed USB device using ehci_hcd and address 4

[ 1.919111] ata4.00: configured for UDMA/133

[ 1.922603] ata3.00: configured for UDMA/133

[ 1.940122] scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5

[ 1.940201] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)

[ 1.940211] sd 2:0:0:0: Attached scsi generic sg2 type 0

[ 1.940225] sd 2:0:0:0: [sdc] Write Protect is off

[ 1.940227] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 1.940244] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.940265] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5

[ 1.940317] sdc:

[ 1.940339] sd 3:0:0:0: Attached scsi generic sg3 type 0

[ 1.940371] sd 3:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)

[ 1.940393] scsi 4:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5

[ 1.940396] sd 3:0:0:0: [sdd] Write Protect is off

[ 1.940398] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00

[ 1.940451] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.940460] sd 4:0:0:0: Attached scsi generic sg4 type 0

[ 1.940511] sd 4:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)

[ 1.940538] sd 4:0:0:0: [sde] Write Protect is off

[ 1.940540] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00

[ 1.940552] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.940561] sdd:

[ 1.940617] sde: sde1

[ 1.948739] sd 4:0:0:0: [sde] Attached SCSI disk

[ 1.958757] sdd1

[ 1.958855] sd 3:0:0:0: [sdd] Attached SCSI disk

[ 1.962313] sdc1

[ 1.962441] sd 2:0:0:0: [sdc] Attached SCSI disk

[ 2.081530] usb 3-4: configuration #1 chosen from 1 choice

[ 2.150538] ata6.00: ATAPI: Optiarc DVD RW AD-7200A, 1.09, max UDMA/66

[ 2.150557] ata6.01: ATAPI: ASUS DVD-E616P2, 1.08, max UDMA/100

[ 2.190649] ata6.00: configured for UDMA/66

[ 2.220612] ata6.01: configured for UDMA/100

[ 2.223555] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7200A 1.09 PQ: 0 ANSI: 5

[ 2.229168] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

[ 2.229170] Uniform CD-ROM driver Revision: 3.20

[ 2.229224] sr 5:0:0:0: Attached scsi CD-ROM sr0

[ 2.229256] sr 5:0:0:0: Attached scsi generic sg5 type 5

[ 2.236431] scsi 5:0:1:0: CD-ROM ASUS DVD-E616P2 1.08 PQ: 0 ANSI: 5

[ 2.240526] sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray

[ 2.240569] sr 5:0:1:0: Attached scsi CD-ROM sr1

[ 2.240594] sr 5:0:1:0: Attached scsi generic sg6 type 5

[ 2.411350] usb 5-1: new full speed USB device using ohci_hcd and address 2

[ 2.509048] EXT4-fs (sdb1): mounted filesystem with ordered data mode

[ 2.610950] usb 5-1: configuration #1 chosen from 1 choice

[ 2.670349] ieee1394: Host added: ID:BUS[0-00:1023] GUID[008f1300369f0600]

[ 2.940282] usb 5-3: new full speed USB device using ohci_hcd and address 3

[ 3.129055] usb 5-3: configuration #1 chosen from 1 choice

[ 3.131028] hub 5-3:1.0: USB hub found

[ 3.133008] hub 5-3:1.0: 4 ports detected

[ 3.480242] usb 9-2: new full speed USB device using ohci_hcd and address 2

[ 3.741295] usb 9-2: configuration #1 chosen from 1 choice

[ 3.821107] usb 5-3.1: new low speed USB device using ohci_hcd and address 4

[ 3.943132] usb 5-3.1: configuration #1 chosen from 1 choice

[ 4.021097] usb 5-3.2: new full speed USB device using ohci_hcd and address 5

[ 4.147150] usb 5-3.2: configuration #1 chosen from 1 choice

[ 4.231114] usb 5-3.4: new full speed USB device using ohci_hcd and address 6

[ 4.355155] usb 5-3.4: configuration #1 chosen from 1 choice

[ 6.661547] usb-storage: device scan complete

[ 6.662563] scsi 6:0:0:0: Direct-Access WD My Passport 070A 2003 PQ: 0 ANSI: 4

[ 6.663423] scsi 6:0:0:1: Enclosure WD SES Device 2003 PQ: 0 ANSI: 4

[ 6.663627] sd 6:0:0:0: Attached scsi generic sg7 type 0

[ 6.663688] scsi 6:0:0:1: Attached scsi generic sg8 type 13

[ 6.664429] sd 6:0:0:0: [sdf] 623769600 512-byte logical blocks: (319 GB/297 GiB)

[ 6.666392] sd 6:0:0:0: [sdf] Write Protect is off

[ 6.666394] sd 6:0:0:0: [sdf] Mode Sense: 23 00 10 00

[ 6.666396] sd 6:0:0:0: [sdf] Assuming drive cache: write through

[ 6.669264] sd 6:0:0:0: [sdf] Assuming drive cache: write through

[ 6.669267] sdf: sdf1

[ 7.020387] sd 6:0:0:0: [sdf] Assuming drive cache: write through

[ 7.020389] sd 6:0:0:0: [sdf] Attached SCSI disk

[ 12.929596] udev: starting version 151

[ 12.948230] lp: driver loaded but no devices found

[ 12.954986] Adding 3227640k swap on /dev/sdb5. Priority:-1 extents:1 across:3227640k

[ 12.962245] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0x000b00-0x000b0f]

[ 12.962247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 12.986352] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 13.020100] EDAC MC: Ver: 2.1.0 Apr 16 2010

[ 13.039144] cfg80211: Calling CRDA to update world regulatory domain

[ 13.057986] Bluetooth: Core ver 2.15

[ 13.058812] usbcore: registered new interface driver hiddev

[ 13.060352] NET: Registered protocol family 31

[ 13.060353] Bluetooth: HCI device and connection manager initialized

[ 13.060355] Bluetooth: HCI socket layer initialized

[ 13.061380] Bluetooth: Generic Bluetooth USB driver ver 0.6

[ 13.061454] usbcore: registered new interface driver btusb

[ 13.064464] EDAC amd64_edac: Ver: 3.2.0 Apr 16 2010

[ 13.064673] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:12.1/usb5/5-3/5-3.1/5-3.1:1.0/input/input3

[ 13.064717] generic-usb 0003:046D:C226.0001: input,hidraw0: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:12.1-3.1/input0

[ 13.066721] cfg80211: World regulatory domain updated:

[ 13.066723] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 13.066725] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 13.066727] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 13.066728] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 13.066730] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 13.066731] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 13.070107] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).

[ 13.070113] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.

[ 13.070114] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.

[ 13.070115] (Note that use of the override may cause unknown side effects.)

[ 13.070128] amd64_edac: probe of 0000:00:18.2 failed with error -22

[ 13.076017] input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:12.1/usb5/5-3/5-3.1/5-3.1:1.1/input/input4

[ 13.076099] generic-usb 0003:046D:C226.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:12.1-3.1/input1

[ 13.077391] [drm] Initialized drm 1.1.0 20060810

[ 13.078289] ses 6:0:0:1: Attached Enclosure device

[ 13.080047] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb5/5-3/5-3.2/5-3.2:1.0/input/input5

[ 13.080105] generic-usb 0003:046D:C049.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:12.1-3.2/input0

[ 13.082902] type=1505 audit(1273827622.353:2): operation="profile_load" pid=813 name="/sbin/dhclient3"

[ 13.083075] type=1505 audit(1273827622.353:3): operation="profile_load" pid=813 name="/usr/lib/NetworkManager/nm-dhcp-client.action"

[ 13.083173] type=1505 audit(1273827622.353:4): operation="profile_load" pid=813 name="/usr/lib/connman/scripts/dhclient-script"

[ 13.086954] generic-usb 0003:046D:C049.0004: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:12.1-3.2/input1

[ 13.095204] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004

[ 13.095219] usbcore: registered new interface driver usblp

[ 13.099948] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:12.1/usb5/5-3/5-3.4/5-3.4:1.0/input/input6

[ 13.100017] generic-usb 0003:046D:C227.0005: input,hiddev98,hidraw4: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:12.1-3.4/input0

[ 13.100034] usbcore: registered new interface driver usbhid

[ 13.100036] usbhid: v2.6:USB HID core driver

[ 13.134460] [drm] radeon defaulting to kernel modesetting.

[ 13.134463] [drm] radeon kernel modesetting enabled.

[ 13.134527] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 13.134530] radeon 0000:01:05.0: setting latency timer to 64

[ 13.135985] [drm] radeon: Initializing kernel modesetting.

[ 13.136051] [drm] register mmio base: 0xFE9F0000

[ 13.136053] [drm] register mmio size: 65536

[ 13.136604] ATOM BIOS: ASROCK

[ 13.136611] [drm] Clocks initialized !

[ 13.138240] [drm] Detected VRAM RAM=256M, BAR=256M

[ 13.138243] [drm] RAM width 32bits DDR

[ 13.144629] [TTM] Zone kernel: Available graphics memory: 1900122 kiB.

[ 13.144641] [drm] radeon: 256M of VRAM memory ready

[ 13.144642] [drm] radeon: 512M of GTT memory ready.

[ 13.144664] [drm] radeon: irq initialized.

[ 13.144666] [drm] GART: num cpu pages 131072, num gpu pages 131072

[ 13.145011] [drm] Loading RS780 Microcode

[ 13.145014] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin

[ 13.147041] platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin

[ 13.148613] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin

[ 13.150558] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 13.162205] phy0: Selected rate control algorithm 'minstrel'

[ 13.162622] Registered led device: rt2800usb-phy0::radio

[ 13.162631] Registered led device: rt2800usb-phy0::assoc

[ 13.162640] Registered led device: rt2800usb-phy0::quality

[ 13.163194] usbcore: registered new interface driver rt2800usb

[ 13.165530] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.

[ 13.168825] rtusb init --->

[ 13.168880] usbcore: registered new interface driver rt2870

[ 13.183907] CA0106 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21

[ 13.183922] snd-ca0106: Model 1013 Rev 00000000 Serial 10131102

[ 13.194236] [drm] ring test succeeded in 0 usecs

[ 13.194303] [drm] radeon: ib pool ready.

[ 13.194412] [drm] ib test succeeded in 0 usecs

[ 13.194414] [drm] Enabling audio support

[ 13.194505] [drm] Radeon Display Connectors

[ 13.194505] [drm] Connector 0:

[ 13.194505] [drm] VGA

[ 13.194506] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c

[ 13.194507] [drm] Encoders:

[ 13.194508] [drm] CRT1: INTERNAL_KLDSCP_DAC1

[ 13.194509] [drm] Connector 1:

[ 13.194510] [drm] HDMI-A

[ 13.194510] [drm] HPD3

[ 13.194512] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c

[ 13.194513] [drm] Encoders:

[ 13.194514] [drm] DFP3: INTERNAL_KLDSCP_LVTMA

[ 13.286958] hda_codec: ALC888: BIOS auto-probing.

[ 13.288815] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7

[ 13.340188] [drm] fb mappable at 0xD0141000

[ 13.340190] [drm] vram apper at 0xD0000000

[ 13.340191] [drm] size 8294400

[ 13.340192] [drm] fb depth is 24

[ 13.340193] [drm] pitch is 7680

[ 13.340235] fb0: radeondrmfb frame buffer device

[ 13.340237] registered panic notifier

[ 13.340240] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0

[ 13.341331] vga16fb: initializing

[ 13.341333] vga16fb: mapped to 0xffff8800000a0000

[ 13.341336] vga16fb: not registering due to another framebuffer present

[ 13.341408] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 13.341429] HDA Intel 0000:01:05.1: setting latency timer to 64

[ 13.387379] Console: switching to colour frame buffer device 240x67

[ 13.686076] type=1505 audit(1273827622.953:5): operation="profile_load" pid=1127 name="/usr/share/gdm/guest-session/Xsession"

[ 13.686957] type=1505 audit(1273827622.953:6): operation="profile_replace" pid=1128 name="/sbin/dhclient3"

[ 13.687133] type=1505 audit(1273827622.953:7): operation="profile_replace" pid=1128 name="/usr/lib/NetworkManager/nm-dhcp-client.action"

[ 13.687232] type=1505 audit(1273827622.953:8): operation="profile_replace" pid=1128 name="/usr/lib/connman/scripts/dhclient-script"

[ 13.688852] type=1505 audit(1273827622.953:9): operation="profile_load" pid=1129 name="/usr/bin/evince"

[ 13.691003] type=1505 audit(1273827622.963:10): operation="profile_load" pid=1129 name="/usr/bin/evince-previewer"

[ 13.692410] type=1505 audit(1273827622.963:11): operation="profile_load" pid=1129 name="/usr/bin/evince-thumbnailer"

[ 13.813244] r8169: eth0: link down

[ 13.813612] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 13.814578] rt2800usb 1-2:1.0: firmware: requesting rt2870.bin

[ 13.828208] Bluetooth: L2CAP ver 2.14

[ 13.828210] Bluetooth: L2CAP socket layer initialized

[ 13.831061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 13.831063] Bluetooth: BNEP filters: protocol multicast

[ 13.835605] ppdev: user-space parallel port driver

[ 13.838826] Bridge firewalling registered

[ 14.119392] CPU0 attaching NULL sched-domain.

[ 14.119396] CPU1 attaching NULL sched-domain.

[ 14.119398] CPU2 attaching NULL sched-domain.

[ 14.169158] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 14.202952] CPU0 attaching sched-domain:

[ 14.202954] domain 0: span 0-2 level MC

[ 14.202956] groups: 0 1 2

[ 14.202959] CPU1 attaching sched-domain:

[ 14.202961] domain 0: span 0-2 level MC

[ 14.202962] groups: 1 2 0

[ 14.202965] CPU2 attaching sched-domain:

[ 14.202966] domain 0: span 0-2 level MC

[ 14.202967] groups: 2 0 1

[ 14.236842] Bluetooth: SCO (Voice Link) ver 0.6

[ 14.236844] Bluetooth: SCO socket layer initialized

[ 14.443490] Bluetooth: RFCOMM TTY layer initialized

[ 14.443493] Bluetooth: RFCOMM socket layer initialized

[ 14.443494] Bluetooth: RFCOMM ver 1.11

[ 14.656739] usb 9-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1

[ 15.903669] CPU0 attaching NULL sched-domain.

[ 15.903673] CPU1 attaching NULL sched-domain.

[ 15.903674] CPU2 attaching NULL sched-domain.

[ 15.981322] CPU0 attaching sched-domain:

[ 15.981324] domain 0: span 0-2 level MC

[ 15.981326] groups: 0 1 2

[ 15.981330] CPU1 attaching sched-domain:

[ 15.981331] domain 0: span 0-2 level MC

[ 15.981332] groups: 1 2 0

[ 15.981335] CPU2 attaching sched-domain:

[ 15.981336] domain 0: span 0-2 level MC

[ 15.981337] groups: 2 0 1

[ 16.420034] end_request: I/O error, dev fd0, sector 0

[ 16.442526] end_request: I/O error, dev fd0, sector 0

[ 17.044051] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.

 

[jim_p]

Αυτα ειναι τα οσα γινονται στα ~20 δευτερα του boot του ubuntu σου! Δεν λενε κατι για την καρτα.

[lefstef]

Τι να σου πω δεν ξέρω. Λέω να κατεβάσω τα 64bit mandriva να τελειώνω και όταν βγούνε καινούριες εκδόσεις και παίζουν τα αλλάζω.

[lefstef]

Επειδή τα mandriva δεν μου αρέσουν και έχουν πρόβλημα, όταν πάω να εγκαταστήσω κάποια εφαρμογή μου βγάζουν ότι λείπουν κάποια πακέτα.

Θέλω να μου προτείνετε κάποιο usb wifi όχι πολύ ακριβό που να παίζει 100% με ubuntu.

[chios]

αυτό http://www.e-shop.gr/show_per.phtml?id=PER.614926

απο ότι φαίνεται εδώ http://linux-wless.passys.nl/query_part.php?brandname=Asus

[lefstef]

θα το έχω υπόψιν μου αλά θέλω και μια γνώμη από κάποιον που διαθέτει κάποιο

[F33L]

μπορω να ρωτησω γιατι σονι και καλα λινουξ? τι θα τρεχεις εκειπανω?

[lefstef]

Είναι όμορφο και πιο ασφαλές περιβάλλον και μου αρέσει να ασχοληθώ μαζί του.