ubuntu 9.10 κολαει σαν τρελο

onasdiss · 15 Φεβρουαρίου 2010

καλησπερα παιδια εχω εγκαταστησει το ubuntu 9.10 .υπαρχουν στιγμες που κολαει σαν τρελο.ουτε με τα βιστα δεν ειχα τετοιο προβλημα.υπαρχει τιθανοτητα να φταιει η εκδοση που εγκατεστησα?να κατεβασω μια αλλη?το περιεργο ειναι οτι οταν τα ειχα εγκαταστησει παραλληλα με τα βιστα δουλευαν ρολοι,και τωρα που εκανα φορματ και περασα μονο το ubuntu μου κανει νερα.

the_eye · 15 Φεβρουαρίου 2010

Θεν υπάρχει τέτοιο θέμα. Δώσε σε κονσόλα dmesg θα δεις εκεί το πρόβλημα.

Drivers κάρτας γραφικών έχεις στείσει ;

onasdiss · 15 Φεβρουαρίου 2010

εδωσα στην κονσολα αυτο που μου ειπες και μου εβγαλε ενα κατεβετο.τι ακριβως κοιταω?με drivers δεν εχω ασχοληθει καθολου.

chek2fire · 15 Φεβρουαρίου 2010

Οτάν λες κολάει τι θέλεις να πεις ότι σου lagarei, σου κολάει όλο το σύστημα? Τρέχεις και compiz μαζί? Και τι κάρτα γραφικών έχεις?

the_eye · 15 Φεβρουαρίου 2010

εδωσα στην κονσολα αυτο που μου ειπες και μου εβγαλε ενα κατεβετο.τι ακριβως κοιταω?με drivers δεν εχω ασχοληθει καθολου.

Για αντέγραψε εδώ το κατεβατό σε 1-2 μηνύματα.

onasdiss · 15 Φεβρουαρίου 2010

Οτάν λες κολάει τι θέλεις να πεις ότι σου lagarei, σου κολάει όλο το σύστημα? Τρέχεις και compiz μαζί? Και τι κάρτα γραφικών έχεις?

μου lagarei και μερικες φορες με πεταει ο firefox εξω.τρεχω η αληθεια ειναι αρκετα πραγματα ταυτοχρονα

>
[spoiler][/color][    0.906666] TCP: Hash tables configured (established 131072 bind 65536)
[    0.906668] TCP reno registered
[    0.906744] NET: Registered protocol family 1
[    0.906802] Trying to unpack rootfs image as initramfs...
[    1.094481] Freeing initrd memory: 7472k freed
[    1.098485] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    1.098489] Simple Boot Flag at 0x44 set to 0x1
[    1.098673] cpufreq-nforce2: No nForce2 chipset.
[    1.098701] Scanning for low memory corruption every 60 seconds
[    1.098807] audit: initializing netlink socket (disabled)
[    1.098825] type=2000 audit(1266250938.096:1): initialized
[    1.107513] highmem bounce pool size: 64 pages
[    1.107518] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.109000] VFS: Disk quotas dquot_6.5.2
[    1.109061] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.109602] fuse init (API version 7.12)
[    1.109685] msgmni has been set to 1682
[    1.109891] alg: No test for stdrng (krng)
[    1.109905] io scheduler noop registered
[    1.109907] io scheduler anticipatory registered
[    1.109910] io scheduler deadline registered
[    1.109950] io scheduler cfq registered (default)
[    1.109962] pci 0000:00:02.0: Boot video device
[    2.708007] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    4.308007] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    4.308280]   alloc irq_desc for 24 on node -1
[    4.308283]   alloc kstat_irqs on node -1
[    4.308295] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    4.308307] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    4.308471]   alloc irq_desc for 25 on node -1
[    4.308473]   alloc kstat_irqs on node -1
[    4.308482] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    4.308494] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    4.308652]   alloc irq_desc for 26 on node -1
[    4.308654]   alloc kstat_irqs on node -1
[    4.308664] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[    4.308675] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    4.308784] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.308964] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.309152] ACPI: AC Adapter [ADP0] (off-line)
[    4.309230] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    4.309233] ACPI: Power Button [PWRF]
[    4.309285] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    4.309288] ACPI: Power Button [PWRB]
[    4.309332] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    4.312978] ACPI: Lid Switch [LID0]
[    4.313172] fan PNP0C0B:00: registered as cooling_device0
[    4.313178] ACPI: Fan [FAN] (on)
[    4.314125] ACPI: SSDT b7b77c18 0026B (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    4.314809] ACPI: SSDT b7b75598 00537 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    4.315419] Monitor-Mwait will be used to enter C-1 state
[    4.315444] Monitor-Mwait will be used to enter C-2 state
[    4.315453] Marking TSC unstable due to TSC halts in idle
[    4.315465] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    4.315483] processor LNXCPU:00: registered as cooling_device1
[    4.315487] ACPI: Processor [CPU0] (supports 8 throttling states)
[    4.316022] ACPI: SSDT b7b76e18 001CF (v01  PmRef    ApIst 00003000 INTL 20051117)
[    4.316604] ACPI: SSDT b7b77f18 0008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    4.317353] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    4.317375] processor LNXCPU:01: registered as cooling_device2
[    4.317379] ACPI: Processor [CPU1] (supports 8 throttling states)
[    4.325594] thermal LNXTHERM:01: registered as thermal_zone0
[    4.325603] ACPI: Thermal Zone [THRM] (35 C)
[    4.325671] isapnp: Scanning for PnP cards...
[    4.375820] ACPI: Battery Slot [bAT0] (battery present)
[    4.679638] isapnp: No Plug & Play device found
[    4.680831] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.682102] brd: module loaded
[    4.682551] loop: module loaded
[    4.682619] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    4.682694] ahci 0000:00:1f.2: version 3.0
[    4.682709]   alloc irq_desc for 19 on node -1
[    4.682711]   alloc kstat_irqs on node -1
[    4.682717] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.682749]   alloc irq_desc for 27 on node -1
[    4.682751]   alloc kstat_irqs on node -1
[    4.682761] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    4.682850] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    4.682853] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems 
[    4.682859] ahci 0000:00:1f.2: setting latency timer to 64
[    4.704571] scsi0 : ahci
[    4.704657] scsi1 : ahci
[    4.704713] scsi2 : ahci
[    4.704773] scsi3 : ahci
[    4.704832] scsi4 : ahci
[    4.704887] scsi5 : ahci
[    4.705158] ata1: SATA max UDMA/133 abar m2048@0xd6805000 port 0xd6805100 irq 27
[    4.705162] ata2: SATA max UDMA/133 abar m2048@0xd6805000 port 0xd6805180 irq 27
[    4.705164] ata3: DUMMY
[    4.705166] ata4: DUMMY
[    4.705169] ata5: SATA max UDMA/133 abar m2048@0xd6805000 port 0xd6805300 irq 27
[    4.705173] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
[    4.706126] Fixed MDIO Bus: probed
[    4.706160] PPP generic driver version 2.4.2
[    4.706246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.706265] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    4.706276] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    4.706279] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    4.706327] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    4.710243] ehci_hcd 0000:00:1a.7: debug port 1
[    4.710251] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    4.710265] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd6805c00
[    4.724513] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.724590] usb usb1: configuration #1 chosen from 1 choice
[    4.724618] hub 1-0:1.0: USB hub found
[    4.724625] hub 1-0:1.0: 4 ports detected
[    4.724685]   alloc irq_desc for 23 on node -1
[    4.724687]   alloc kstat_irqs on node -1
[    4.724692] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.724702] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    4.724706] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.724737] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    4.728645] ehci_hcd 0000:00:1d.7: debug port 1
[    4.728652] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    4.728668] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd6805800
[    4.744017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.744075] usb usb2: configuration #1 chosen from 1 choice
[    4.744101] hub 2-0:1.0: USB hub found
[    4.744108] hub 2-0:1.0: 8 ports detected
[    4.744178] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.744195] uhci_hcd: USB Universal Host Controller Interface driver
[    4.744217] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.744223] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    4.744227] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.744261] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    4.744296] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0
[    4.744372] usb usb3: configuration #1 chosen from 1 choice
[    4.744400] hub 3-0:1.0: USB hub found
[    4.744406] hub 3-0:1.0: 2 ports detected
[    4.744453]   alloc irq_desc for 21 on node -1
[    4.744455]   alloc kstat_irqs on node -1
[    4.744459] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    4.744466] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    4.744470] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    4.744499] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    4.744544] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0
[    4.744624] usb usb4: configuration #1 chosen from 1 choice
[    4.744651] hub 4-0:1.0: USB hub found
[    4.744657] hub 4-0:1.0: 2 ports detected
[    4.744706] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.744713] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.744717] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.744746] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    4.744774] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[    4.744857] usb usb5: configuration #1 chosen from 1 choice
[    4.744882] hub 5-0:1.0: USB hub found
[    4.744888] hub 5-0:1.0: 2 ports detected
[    4.744936] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.744942] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    4.744946] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.744977] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    4.745005] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[    4.745080] usb usb6: configuration #1 chosen from 1 choice
[    4.745106] hub 6-0:1.0: USB hub found
[    4.745114] hub 6-0:1.0: 2 ports detected
[    4.745161] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    4.745168] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    4.745172] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.745200] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    4.745227] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00005060
[    4.745305] usb usb7: configuration #1 chosen from 1 choice
[    4.745330] hub 7-0:1.0: USB hub found
[    4.745336] hub 7-0:1.0: 2 ports detected
[    4.745388]   alloc irq_desc for 18 on node -1
[    4.745390]   alloc kstat_irqs on node -1
[    4.745394] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    4.745400] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    4.745404] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    4.745433] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    4.745468] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
[    4.745545] usb usb8: configuration #1 chosen from 1 choice
[    4.745571] hub 8-0:1.0: USB hub found
[    4.745577] hub 8-0:1.0: 2 ports detected
[    4.745673] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    4.776339] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.776345] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.776406] mice: PS/2 mouse device common for all mice
[    4.776517] rtc_cmos 00:03: RTC can wake from S4
[    4.776547] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.776580] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    4.776676] device-mapper: uevent: version 1.0.3
[    4.776753] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email][email protected][/email]
[    4.776811] device-mapper: multipath: version 1.1.0 loaded
[    4.776813] device-mapper: multipath round-robin: version 1.0.0 loaded
[    4.776919] EISA: Probing bus 0 at eisa.0
[    4.776925] Cannot allocate resource for EISA slot 1
[    4.776928] Cannot allocate resource for EISA slot 2
[    4.776930] Cannot allocate resource for EISA slot 3
[    4.776932] Cannot allocate resource for EISA slot 4
[    4.776934] Cannot allocate resource for EISA slot 5
[    4.776948] EISA: Detected 0 cards.
[    4.777068] cpuidle: using governor ladder
[    4.777532] cpuidle: using governor menu
[    4.778026] TCP cubic registered
[    4.778176] NET: Registered protocol family 10
[    4.778648] lo: Disabled Privacy Extensions
[    4.778995] NET: Registered protocol family 17
[    4.779011] Bluetooth: L2CAP ver 2.13
[    4.779013] Bluetooth: L2CAP socket layer initialized
[    4.779016] Bluetooth: SCO (Voice Link) ver 0.6
[    4.779017] Bluetooth: SCO socket layer initialized
[    4.779042] Bluetooth: RFCOMM TTY layer initialized
[    4.779045] Bluetooth: RFCOMM socket layer initialized
[    4.779047] Bluetooth: RFCOMM ver 1.11
[    4.779574] Using IPI No-Shortcut mode
[    4.779635] PM: Resume from disk failed.
[    4.779646] registered taskstats version 1
[    4.779783]   Magic number: 14:620:388
[    4.779788] usb usb6: hash matches
[    4.779879] rtc_cmos 00:03: setting system clock to 2010-02-15 16:22:22 UTC (1266250942)
[    4.779882] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.779884] EDD information not available.
[    4.805618] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    5.000562] Clocksource tsc unstable (delta = -204438934 ns)
[    5.028072] ata5: SATA link down (SStatus 0 SControl 300)
[    5.032070] ata2: SATA link down (SStatus 0 SControl 300)
[    5.148048] usb 1-2: new high speed USB device using ehci_hcd and address 3
[    5.196054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.265235] ata1.00: ATA-8: TOSHIBA MK1652GSX, LV010M, max UDMA/100
[    5.265241] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    5.266213] ata1.00: configured for UDMA/100
[    5.280195] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1652GS LV01 PQ: 0 ANSI: 5
[    5.280308] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.280345] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    5.280390] sd 0:0:0:0: [sda] Write Protect is off
[    5.280393] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.280417] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.280539]  sda:
[    5.294014] usb 1-2: configuration #1 chosen from 1 choice
[    5.326880]  sda1 sda2 < sda5 >
[    5.356907] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.532058] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    5.596064] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.607782] ata6.00: ATAPI: PIONEER DVD-RW  DVRTD08A, 1.54, max UDMA/33
[    5.622411] ata6.00: configured for UDMA/33
[    5.700683] scsi 5:0:0:0: CD-ROM            PIONEER  DVD-RW  DVRTD08A 1.54 PQ: 0 ANSI: 5
[    5.704435] usb 3-1: configuration #1 chosen from 1 choice
[    5.824787] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.824792] Uniform CD-ROM driver Revision: 3.20
[    5.824909] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    5.824968] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    5.825018] Freeing unused kernel memory: 540k freed
[    5.825356] Write protecting the kernel text: 4568k
[    5.825413] Write protecting the kernel read-only data: 1836k
[    5.938724] Linux agpgart interface v0.103
[    5.941586] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[    5.942263] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[    5.944566] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    5.975286] [drm] Initialized drm 1.1.0 20060810
[    6.022543] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.022548] i915 0000:00:02.0: setting latency timer to 64
[    6.024915]   alloc irq_desc for 28 on node -1
[    6.024918]   alloc kstat_irqs on node -1
[    6.024928] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[    6.030424] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.030442] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.030545] r8169 0000:02:00.0: setting latency timer to 64
[    6.030694]   alloc irq_desc for 29 on node -1
[    6.030696]   alloc kstat_irqs on node -1
[    6.030733] r8169 0000:02:00.0: irq 29 for MSI/MSI-X
[    6.031404] eth0: RTL8102e at 0xf80ec000, 00:1e:33:84:ba:2c, XID 34a00000 IRQ 29
[    6.065437] ohci1394 0000:04:06.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    6.065444] ohci1394 0000:04:06.0: setting latency timer to 64
[    6.122556] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[d3600000-d36007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    6.141170] [drm] i2c_init DPDDC-B
[    6.150857] [drm] i2c_init DPDDC-D
[    6.277709] i2c-adapter i2c-2: unable to read EDID block.
[    6.277713] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[    6.668793] [drm] TV-20: set mode NTSC 480i 0
[    6.793812] [drm] fb0: inteldrmfb frame buffer device
[    6.803098] acpi device:05: registered as cooling_device3
[    6.803362] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input5
[    6.803390] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    6.803418] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    6.871865] [drm] LVDS-8: set mode 1280x800 1d
[    7.299306] Console: switching to colour frame buffer device 160x50
[    7.396634] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00080d1e3384ba2c]
[    7.599412] PM: Starting manual resume from disk
[    7.599416] PM: Resume from partition 8:5
[    7.599418] PM: Checking hibernation image.
[    7.599576] PM: Resume from disk failed.
[    7.649733] EXT4-fs (sda1): barriers enabled
[    7.671451] kjournald2 starting: pid 427, dev sda1:8, commit interval 5 seconds
[    7.671475] EXT4-fs (sda1): delayed allocation enabled
[    7.671481] EXT4-fs: file extents enabled
[    7.683617] EXT4-fs: mballoc enabled
[    7.683632] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    8.388667] type=1505 audit(1266250946.108:2): operation="profile_load" pid=450 name=/usr/share/gdm/guest-session/Xsession
[    8.394934] type=1505 audit(1266250946.112:3): operation="profile_load" pid=451 name=/sbin/dhclient3
[    8.395722] type=1505 audit(1266250946.112:4): operation="profile_load" pid=451 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    8.396123] type=1505 audit(1266250946.116:5): operation="profile_load" pid=451 name=/usr/lib/connman/scripts/dhclient-script
[    8.447205] type=1505 audit(1266250946.164:6): operation="profile_load" pid=452 name=/usr/bin/evince
[    8.459040] type=1505 audit(1266250946.176:7): operation="profile_load" pid=452 name=/usr/bin/evince-previewer
[    8.465995] type=1505 audit(1266250946.184:8): operation="profile_load" pid=452 name=/usr/bin/evince-thumbnailer
[    8.488978] type=1505 audit(1266250946.208:9): operation="profile_load" pid=454 name=/usr/lib/cups/backend/cups-pdf
[    8.489850] type=1505 audit(1266250946.208:10): operation="profile_load" pid=454 name=/usr/sbin/cupsd
[    8.492634] type=1505 audit(1266250946.212:11): operation="profile_load" pid=455 name=/usr/sbin/tcpdump
[   17.718101] udev: starting version 147
[   17.767066] Adding 6385796k swap on /dev/sda5.  Priority:-1 extents:1 across:6385796k 
[   17.809817] sdhci: Secure Digital Host Controller Interface driver
[   17.809820] sdhci: Copyright(c) Pierre Ossman
[   17.812931] sdhci-pci 0000:04:06.1: SDHCI controller found [1180:0822] (rev 22)
[   17.812948] sdhci-pci 0000:04:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   17.813971] sdhci-pci 0000:04:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   17.815009] Registered led device: mmc0::
[   17.816043] mmc0: SDHCI controller on PCI [0000:04:06.1] using DMA
[   17.817776] ricoh-mmc: Ricoh MMC Controller disabling driver
[   17.817779] ricoh-mmc: Copyright(c) Philip Langdale
[   17.817808] ricoh-mmc: Ricoh MMC controller found at 0000:04:06.2 [1180:0843] (rev 12)
[   17.817827] ricoh-mmc: Controller is now disabled.
[   17.870421] EXT4-fs (sda1): internal journal on sda1:8
[   17.941086] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.943344] Bluetooth: Generic Bluetooth USB driver ver 0.5
[   17.943459] usbcore: registered new interface driver btusb
[   17.994261] Linux video capture interface: v2.00
[   17.997280] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[   17.999722] lp: driver loaded but no devices found
[   18.001363] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input6
[   18.001415] usbcore: registered new interface driver uvcvideo
[   18.001418] USB Video Class driver (v0.1.0)
[   18.028572] cfg80211: Calling CRDA to update world regulatory domain
[   18.035633] cfg80211: World regulatory domain updated:
[   18.035636] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.035639] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.035642] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.035645] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.035647] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.035650] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.085522] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[   18.085526] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[   18.085677] iwlagn 0000:03:00.0: power state changed by ACPI to D0
[   18.085693] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   18.085703] iwlagn 0000:03:00.0: setting latency timer to 64
[   18.085731] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[   18.158089]   alloc irq_desc for 22 on node -1
[   18.158093]   alloc kstat_irqs on node -1
[   18.158101] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   18.158137] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   18.167226] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[   18.167292]   alloc irq_desc for 30 on node -1
[   18.167294]   alloc kstat_irqs on node -1
[   18.167313] iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
[   18.181489] r8169: eth0: link down
[   18.181694] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.224948] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   18.227727] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[   18.227788] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   18.322319] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[   18.446746] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
[   18.501670] type=1505 audit(1266243756.220:12): operation="profile_replace" pid=1039 name=/usr/share/gdm/guest-session/Xsession
[   18.503486] type=1505 audit(1266243756.220:13): operation="profile_replace" pid=1040 name=/sbin/dhclient3
[   18.504225] type=1505 audit(1266243756.224:14): operation="profile_replace" pid=1040 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   18.504653] type=1505 audit(1266243756.224:15): operation="profile_replace" pid=1040 name=/usr/lib/connman/scripts/dhclient-script
[   18.511533] type=1505 audit(1266243756.228:16): operation="profile_replace" pid=1043 name=/usr/bin/evince
[   18.524121] type=1505 audit(1266243756.244:17): operation="profile_replace" pid=1043 name=/usr/bin/evince-previewer
[   18.532966] type=1505 audit(1266243756.252:18): operation="profile_replace" pid=1043 name=/usr/bin/evince-thumbnailer
[   18.543592] type=1505 audit(1266243756.260:19): operation="profile_replace" pid=1055 name=/usr/lib/cups/backend/cups-pdf
[   18.544452] type=1505 audit(1266243756.264:20): operation="profile_replace" pid=1055 name=/usr/sbin/cupsd
[   18.547761] type=1505 audit(1266243756.264:21): operation="profile_replace" pid=1056 name=/usr/sbin/tcpdump
[   18.601069] Registered led device: iwl-phy0::radio
[   18.601107] Registered led device: iwl-phy0::assoc
[   18.601136] Registered led device: iwl-phy0::RX
[   18.601170] Registered led device: iwl-phy0::TX
[   18.617180] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.929684] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000
[   18.929691] synaptics: Toshiba Satellite A300 detected, limiting rate to 40pps.
[   19.022619] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   19.118794] i2c-adapter i2c-2: unable to read EDID block.
[   19.118800] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   19.124840] i2c-adapter i2c-2: unable to read EDID block.
[   19.124845] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   19.170668] [drm] TV-20: set mode NTSC 480i 0
[   19.310993] [drm] TV-20: set mode NTSC 480i 0
[   19.536662] i2c-adapter i2c-2: unable to read EDID block.
[   19.536666] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   19.541078] i2c-adapter i2c-2: unable to read EDID block.
[   19.541080] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   19.586814] [drm] TV-20: set mode NTSC 480i 0
[   19.727824] [drm] TV-20: set mode NTSC 480i 0
[   20.048576] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.048579] Bluetooth: BNEP filters: protocol multicast
[   20.066074] Bridge firewalling registered
[   20.170725] ppdev: user-space parallel port driver
[   20.937094] CPU0 attaching NULL sched-domain.
[   20.937102] CPU1 attaching NULL sched-domain.
[   20.963635] CPU0 attaching sched-domain:
[   20.963640]  domain 0: span 0-1 level MC
[   20.963643]   groups: 0 1
[   20.963648]   domain 1: span 0-1 level CPU
[   20.963651]    groups: 0-1 (__cpu_power = 2048)
[   20.963657] CPU1 attaching sched-domain:
[   20.963659]  domain 0: span 0-1 level MC
[   20.963662]   groups: 1 0
[   20.963666]   domain 1: span 0-1 level CPU
[   20.963669]    groups: 0-1 (__cpu_power = 2048)
[   21.660769] CPU0 attaching NULL sched-domain.
[   21.660775] CPU1 attaching NULL sched-domain.
[   21.680122] CPU0 attaching sched-domain:
[   21.680127]  domain 0: span 0-1 level MC
[   21.680131]   groups: 0 1
[   21.680139]   domain 1: span 0-1 level CPU
[   21.680143]    groups: 0-1 (__cpu_power = 2048)
[   21.680154] CPU1 attaching sched-domain:
[   21.680156]  domain 0: span 0-1 level MC
[   21.680159]   groups: 1 0
[   21.680163]   domain 1: span 0-1 level CPU
[   21.680165]    groups: 0-1 (__cpu_power = 2048)
[   22.082947] i2c-adapter i2c-2: unable to read EDID block.
[   22.082953] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   22.087765] i2c-adapter i2c-2: unable to read EDID block.
[   22.087769] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   22.133527] [drm] TV-20: set mode NTSC 480i 0
[   22.274288] [drm] TV-20: set mode NTSC 480i 0
[   22.506738] i2c-adapter i2c-2: unable to read EDID block.
[   22.506742] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   22.511431] i2c-adapter i2c-2: unable to read EDID block.
[   22.511434] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   22.557177] [drm] TV-20: set mode NTSC 480i 0
[   22.697300] [drm] TV-20: set mode NTSC 480i 0
[   22.927724] i2c-adapter i2c-2: unable to read EDID block.
[   22.927728] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   22.934628] i2c-adapter i2c-2: unable to read EDID block.
[   22.934633] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   22.980412] [drm] TV-20: set mode NTSC 480i 0
[   23.120556] [drm] TV-20: set mode NTSC 480i 0
[   23.975120] i2c-adapter i2c-2: unable to read EDID block.
[   23.975125] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   23.979552] i2c-adapter i2c-2: unable to read EDID block.
[   23.979554] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[   24.025297] [drm] TV-20: set mode NTSC 480i 0
[   24.165420] [drm] TV-20: set mode NTSC 480i 0
[   30.037331] wlan0: authenticate with AP 00:1f:9f:8e:39:61
[   30.039588] wlan0: authenticated
[   30.039592] wlan0: associate with AP 00:1f:9f:8e:39:61
[   30.042032] wlan0: RX AssocResp from 00:1f:9f:8e:39:61 (capab=0x401 status=0 aid=1)
[   30.042035] wlan0: associated
[   30.043318] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   40.728016] wlan0: no IPv6 routers present[color="Black"][/spoiler]

αυτο ειναι το κατεβατο που μου βγαζει.η καρτα γραφικων μου εχω την εντιπωση οτι ειναι intel.toshiba satellite a300 ειναι το laptop

jim_p · 15 Φεβρουαρίου 2010

Καταρχην κανε ενα κοπο και βαλε ολο αυτο το κειμενο σε code tags και σε spoiler tags.

Το dmesg σου δεν λεει τιποτα περιεργο, εκτος του οτι το συστημα σου ξεκιναει σε 40 δευτερα περιπου και οτι εχεις intel καρτα γραφικων.

Μηπως το "κολλημα" συμβαινει οταν εχεις πολλες σελιδες με flash ανοιχτες?

the_eye · 15 Φεβρουαρίου 2010

Σου βγάζει αρκετά λάθη για την κάρτα γραφικών.

πχ

[ 22.506738] i2c-adapter i2c-2: unable to read EDID block.

[ 22.506742] i915 0000:00:02.0: HDMI Type A-1: no EDID data

[ 22.511431] i2c-adapter i2c-2: unable to read EDID block.

[ 22.511434] i915 0000:00:02.0: HDMI Type A-1: no EDID data

[ 22.927724] i2c-adapter i2c-2: unable to read EDID block.

[ 22.927728] i915 0000:00:02.0: HDMI Type A-1: no EDID data

[ 22.934628] i2c-adapter i2c-2: unable to read EDID block.

[ 22.934633] i915 0000:00:02.0: HDMI Type A-1: no EDID data

[ 23.975120] i2c-adapter i2c-2: unable to read EDID block.

[ 23.975125] i915 0000:00:02.0: HDMI Type A-1: no EDID data

[ 23.979552] i2c-adapter i2c-2: unable to read EDID block.

[ 23.979554] i915 0000:00:02.0: HDMI Type A-1: no EDID data

έχεις intel κάρτα i915 και κάτι δεν πάει καλά με τους drivers

onasdiss · 16 Φεβρουαρίου 2010

Καταρχην κανε ενα κοπο και βαλε ολο αυτο το κειμενο σε code tags και σε spoiler tags.

Το dmesg σου δεν λεει τιποτα περιεργο, εκτος του οτι το συστημα σου ξεκιναει σε 40 δευτερα περιπου και οτι εχεις intel καρτα γραφικων.

Μηπως το "κολλημα" συμβαινει οταν εχεις πολλες σελιδες με flash ανοιχτες?

Ναι,τις περισσοτερες φορες μου κολλαει οταν εχω αρκετες σελιδες ανοικτες με φλας.

Σου βγάζει αρκετά λάθη για την κάρτα γραφικών.
πχ

[ 22.506738] i2c-adapter i2c-2: unable to read EDID block.

[ 22.506742] i915 0000:00:02.0: HDMI Type A-1: no EDID data

[ 22.511431] i2c-adapter i2c-2: unable to read EDID block.

[ 22.511434] i915 0000:00:02.0: HDMI Type A-1: no EDID data

[ 22.927724] i2c-adapter i2c-2: unable to read EDID block.

[ 22.927728] i915 0000:00:02.0: HDMI Type A-1: no EDID data

[ 22.934628] i2c-adapter i2c-2: unable to read EDID block.

[ 22.934633] i915 0000:00:02.0: HDMI Type A-1: no EDID data

[ 23.975120] i2c-adapter i2c-2: unable to read EDID block.

[ 23.975125] i915 0000:00:02.0: HDMI Type A-1: no EDID data

[ 23.979552] i2c-adapter i2c-2: unable to read EDID block.

[ 23.979554] i915 0000:00:02.0: HDMI Type A-1: no EDID data

έχεις intel κάρτα i915 και κάτι δεν πάει καλά με τους drivers

Δεν εχω εγκαταστησει κανεναν ντραιβερ.οπως εκανα ινσταλ ετσι το αφησα,ειχα την εντιπωση οτι μου τους ειχε βρει ολους.Ξερεις τι πρεπει να κανω για να εγκαταστησω τους ντραιβερς της καρτας γραφικων?

the_eye · 16 Φεβρουαρίου 2010

Είναι κάποιο bug

https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/487185

Για δοκίμασε αυτό που λέει στο τέλος. Να αναβαθμίσεις σε νέο πυρίνα.

Yesterday i installed the 2.6.32.8 ubuntu mainline kernel on my system and the problem disappered !
No more messages in dmesg

chek2fire · 16 Φεβρουαρίου 2010

πρωτού αρχισεις να κάνεις πειράματα και να περνάς νέους kernel δες πρώτα την περίπτωση του flash που είναι ότι πιο συνηθισμένο για να έχεις κολήματα στο σύστημα. Αν σου αρχίσει να λαγκάρει άνοιξε και το task manager και δες ποιό πρόγραμμα σου τρώει περισσότερους πόρους. Μερικές φορές μπορεί να τρέχουν μερικά ghost που να τρώνε αρκετους πόρους και να θέλουν kill. Και φυσικά firefox μαζί με flash και αρκετές καρτέλες στο linux είναι μνημοβόρο cocteil. Δες και κάποιον άλλον broswer ελαφρύ όπως είναι ο chrome.

onasdiss · 16 Φεβρουαρίου 2010

Είναι κάποιο bug
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/487185

Για δοκίμασε αυτό που λέει στο τέλος. Να αναβαθμίσεις σε νέο πυρίνα.

Και πώς ακριβώς αναβαθμίζουμε νεο πυρήνα? Είμαι νέος στο linux και κάτι τέτοια μου φένονται εντελώς ακαταλαβίστικα.Οποιαδήποτε βοήθεια θα ήταν χρήσιμη.

Vas77 · 16 Φεβρουαρίου 2010

Και πώς ακριβώς αναβαθμίζουμε νεο πυρήνα? Είμαι νέος στο linux και κάτι τέτοια μου φένονται εντελώς ακαταλαβίστικα.Οποιαδήποτε βοήθεια θα ήταν χρήσιμη.

Δεν νομίζω να χρειάζεται να εγκαταστήσεις νέο πυρήνα. Οι κάρτες γραφικών της Intel δεν είναι και οι καλύτερες κάρτες. Οπότε, το σύστημα δείχνει να κολάει όταν τρέχεις πρόγραμμα με "βαριά" γραφικά.

Σε terminal ....

Τρέξε την εντολή glxinfo και δώσε μας τις 10 πρώτες γραμμές.

Επίσης, τρέξε την εντολή glxgears (θα δεις να γράφει κάτι νούμερα στο terminal). Μην αλλάξεις το μέγεθος του παραθύρου, και μην κάνεις καμία άλλη δουλειά στο σύστημα την ώρα που τρέχει το πρόγραμμα. Αστο να τρέξει μέχρι να γράψει 5-6 γραμμές και δώσε μας αυτές τις γραμμές. Για να σταματήσεις ένα πρόγραμμα που τρέχει σε terminal πατάς ctrl+c

onasdiss · 16 Φεβρουαρίου 2010

name of display: :0.0

display: :0 screen: 0

direct rendering: Yes

server glx vendor string: SGI

server glx version string: 1.2

server glx extensions:

GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,

GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,

GLX_OML_swap_method, GLX_SGI_swap_control, GLX_SGIS_multisample,

GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group

1856 frames in 5.0 seconds

2161 frames in 5.0 seconds

2157 frames in 5.0 seconds

1928 frames in 5.0 seconds

2163 frames in 5.0 seconds

1999 frames in 5.0 seconds

2333 frames in 5.0 seconds

2085 frames in 5.0 seconds

2019 frames in 5.0 seconds

2047 frames in 5.0 seconds

petros666 · 16 Φεβρουαρίου 2010

Και πώς ακριβώς αναβαθμίζουμε νεο πυρήνα? Είμαι νέος στο linux και κάτι τέτοια μου φένονται εντελώς ακαταλαβίστικα.Οποιαδήποτε βοήθεια θα ήταν χρήσιμη.

αν δε θες να ξαναεγκαταστησεις το ubuntu απο την αρχη μην τολμησεις και αλλαξεις πυρηνα

Για να βαλεις νεο πυρηνα πρεπει να ξερεις πολυ καλα τι κανεις, δεν ειναι τοσο απλο

Σύνδεση

ubuntu 9.10 κολαει σαν τρελο

Προτεινόμενες αναρτήσεις

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Αρχειοθετημένο

Σύνδεση