προβληματα με usb flashakia και εξωτερικους δισκους και flash(web) και r00

[linux4linux]

Καλησπερα στην κοινοτητα

 

τρεχω debian squeeze και εχω τα εξης κολληματα

οταν συνδεω ενα φλασακι η ενα δισκο μαλλον μου τον βαζει στο συστημα σαν read only και δεν μπορω να βαλω κατι μεσα σε αυτο παρα μονο να παρω κατι...

και επισης η ταxυτητα μεταφορας δεδομενων ειναι ψευτικη ..δειχνει οτι τελειωσε ενω δεν εχει τελειωσει η δειχνει οτι εχει περασει πχ 400ΜΒ χωρις να τα χει περασει

...

ρυθμιζουμε τιποτα στο mtab , fstab?

κατι αλλο

παντα κρασαρει ο περιηγητης με το tube...opera , midori , galeon , iceweasel

τελος δεν μπορω να ανοιξω αρχεια *.r00 r01 ktl ενω εχω file-roller xarchiver unrar-non free

[jim_p]

Ποιο(ν)

- DE

- file manager

- flash (εκδοση)

χρησιμοποιεις ?

 

Για το προβλημα με τις αφαιρουμενες συσκευες, τι λεει το dmesg οταν συνδεσεις κατι πανω σε usb?

[linux4linux]

gnome

nautilus

10.kati την τελευταια χρησιμοποιω

 

dmesg

 

[63952.008014] usb 3-2: new high speed USB device using ehci_hcd and address 26

[63952.142270] usb 3-2: New USB device found, idVendor=04b4, idProduct=6830

[63952.142275] usb 3-2: New USB device strings: Mfr=0, Product=57, SerialNumber=44

[63952.142279] usb 3-2: Product: Cypress AT2LP

[63952.142281] usb 3-2: SerialNumber: DEF10E7BC2FD

[63952.142383] usb 3-2: configuration #1 chosen from 1 choice

[63952.143378] scsi31 : SCSI emulation for USB Mass Storage devices

[63952.143489] usb-storage: device found at 26

[63952.143492] usb-storage: waiting for device to settle before scanning

[63952.380014] usb 7-1: new full speed USB device using uhci_hcd and address 42

[63952.504010] usb 7-1: device descriptor read/64, error -71

[63952.732017] usb 7-1: device descriptor read/64, error -71

[63952.952013] usb 7-1: new full speed USB device using uhci_hcd and address 43

[63953.076013] usb 7-1: device descriptor read/64, error -71

[63953.300788] usb 7-1: device descriptor read/64, error -71

[63953.520014] usb 7-1: new full speed USB device using uhci_hcd and address 44

[63953.928011] usb 7-1: device not accepting address 44, error -71

[63954.044016] usb 7-1: new full speed USB device using uhci_hcd and address 45

[63954.452010] usb 7-1: device not accepting address 45, error -71

[63954.452027] hub 7-0:1.0: unable to enumerate USB device on port 1

[63957.140646] usb-storage: device scan complete

[63960.683650] scsi 31:0:0:0: Direct-Access SAMSUNG HD400LD 0000 PQ: 0 ANSI: 0

[63960.684185] sd 31:0:0:0: Attached scsi generic sg4 type 0

[63960.685251] sd 31:0:0:0: [sdd] 781422768 512-byte hardware sectors: (400 GB/372 GiB)

[63960.686248] sd 31:0:0:0: [sdd] Write Protect is off

[63960.686252] sd 31:0:0:0: [sdd] Mode Sense: 27 00 00 00

[63960.686255] sd 31:0:0:0: [sdd] Assuming drive cache: write through

[63960.687994] sd 31:0:0:0: [sdd] Assuming drive cache: write through

[63960.688000] sdd: sdd1

[63960.708879] sd 31:0:0:0: [sdd] Attached SCSI disk

[63960.786109] sd 31:0:0:0: [sdd] Sense Key : Recovered Error [current] [descriptor]

[63960.786116] Descriptor sense data with sense descriptors (in hex):

[63960.786119] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00

[63960.786130] 00 00 00 00 e0 50

[63960.786136] sd 31:0:0:0: [sdd] Add. Sense: ATA pass through information available

 

 

[jim_p]

Δες μηπως σου κανει αυτο

 

http://urukrama.wordpress.com/2009/01/27/usb-drive-not-recognised-error-71/

 

Δεν εχω το /etc/modprobe.d/options που λεει εκει, οποτε κοιταω μηπως βρω παρομοιο αρχειο.

[linux4linux]

sto /etc/modprobe.d δεν υπαρχει αρχειο option ουτε το αρχειο /etc/modprobe.conf υπαρχει

το δημιουργω?

[jim_p]

Ουτε εδω το εχω και το ψαχνω τωρα!

Δοκιμασε να το φτιαξεις στο /etc/modprobe.d/ και με καταληξη .conf για να μην γκρινιαζει κατα την εκκινηση.

 

Αν βαριεσαι να κανεις επανεκκινηση, κανε rmmod και ξανα modprobe το usbcore για να παρει την αλλαγη.

[linux4linux]

δηλαδη options.conf?

[jim_p]

Ναι, ενα απλο "touch /etc/modprobe.d/options.conf" σαν root και εισαι ετοιμος για επεξεργασια με το nano μετα.

 

Για τα κομματιασμενα rar αρχεια η καλυτερη λυση ειναι wine και 7zip.

[linux4linux]

δεν μπορω παλι να αντιγραψω κατι μεσα στον δισκο...

βγαζει σφαλμα αντιγραφης αρνηση προσβασης

 

και κατι αλλο με sudo nautilus παιρνω

(nautilus:11457): Gtk-WARNING **: Αδυναμία εντοπισμού μηχανής θεμάτων στη διαδρομή_αρθρώματος: "pixmap",

αλλα klain..

το θεμα ειναι με τις usb...

με dmesg

 

[ 420.781015] usb 3-2: new high speed USB device using ehci_hcd and address 5

[ 420.914184] usb 3-2: New USB device found, idVendor=04b4, idProduct=6830

[ 420.914188] usb 3-2: New USB device strings: Mfr=0, Product=57, SerialNumber=44

[ 420.914191] usb 3-2: Product: Cypress AT2LP

[ 420.914194] usb 3-2: SerialNumber: DEF10E7BC2FD

[ 420.914291] usb 3-2: configuration #1 chosen from 1 choice

[ 420.915337] scsi10 : SCSI emulation for USB Mass Storage devices

[ 420.915454] usb-storage: device found at 5

[ 420.915457] usb-storage: waiting for device to settle before scanning

[ 421.200010] usb 7-1: new full speed USB device using uhci_hcd and address 14

[ 421.321011] usb 7-1: device descriptor read/64, error -71

[ 421.545009] usb 7-1: device descriptor read/64, error -71

[ 421.760016] usb 7-1: new full speed USB device using uhci_hcd and address 15

[ 421.880012] usb 7-1: device descriptor read/64, error -71

[ 422.104012] usb 7-1: device descriptor read/64, error -71

[ 422.320012] usb 7-1: new full speed USB device using uhci_hcd and address 16

[ 422.728012] usb 7-1: device not accepting address 16, error -71

[ 422.841512] usb 7-1: new full speed USB device using uhci_hcd and address 17

[ 423.252018] usb 7-1: device not accepting address 17, error -71

[ 423.252028] hub 7-0:1.0: unable to enumerate USB device on port 1

[ 425.913709] usb-storage: device scan complete

[ 429.430252] scsi 10:0:0:0: Direct-Access SAMSUNG HD400LD 0000 PQ: 0 ANSI: 0

[ 429.430737] sd 10:0:0:0: Attached scsi generic sg3 type 0

[ 429.433915] sd 10:0:0:0: [sdc] 781422768 512-byte hardware sectors: (400 GB/372 GiB)

[ 429.434856] sd 10:0:0:0: [sdc] Write Protect is off

[ 429.434860] sd 10:0:0:0: [sdc] Mode Sense: 27 00 00 00

[ 429.434863] sd 10:0:0:0: [sdc] Assuming drive cache: write through

[ 429.436597] sd 10:0:0:0: [sdc] Assuming drive cache: write through

[ 429.436603] sdc: sdc1

[ 429.463413] sd 10:0:0:0: [sdc] Attached SCSI disk

[ 429.540326] sd 10:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]

[ 429.540332] Descriptor sense data with sense descriptors (in hex):

[ 429.540335] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00

[ 429.540345] 00 00 00 00 e0 50

[ 429.540350] sd 10:0:0:0: [sdc] Add. Sense: ATA pass through information available

[ 429.627440] sd 10:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]

[ 429.627447] Descriptor sense data with sense descriptors (in hex):

[ 429.627449] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00

[ 429.627459] 00 00 00 00 e0 50

[ 429.627464] sd 10:0:0:0: [sdc] Add. Sense: ATA pass through information available

[ 429.635187] sd 10:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]

[ 429.635192] Descriptor sense data with sense descriptors (in hex):

[ 429.635194] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 ff 00 00

[ 429.635204] 00 00 00 00 e0 50

[ 429.635209] sd 10:0:0:0: [sdc] Add. Sense: ATA pass through information available

[ 429.658686] sd 10:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]

[ 429.658691] Descriptor sense data with sense descriptors (in hex):

[ 429.658694] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00

[ 429.658703] 00 4f 00 c2 e0 50

[ 429.658708] sd 10:0:0:0: [sdc] Add. Sense: ATA pass through information available

[ 429.739675] sd 10:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]

[ 429.739680] Descriptor sense data with sense descriptors (in hex):

[ 429.739683] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00

[ 429.739692] 00 4f 00 c2 e0 50

[ 429.739697] sd 10:0:0:0: [sdc] Add. Sense: ATA pass through information available

[ 429.813917] sd 10:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor]

[ 429.813923] Descriptor sense data with sense descriptors (in hex):

[ 429.813926] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00

[ 429.813935] 00 4f 00 c2 e0 50

[ 429.813941] sd 10:0:0:0: [sdc] Add. Sense: ATA pass through information available

[ 429.949916] NTFS volume version 3.1.

 

 

[jim_p]

Το μηνυμα που παιρνεις με τον root nautilus ειναι τελειως ασχετο. Κατι για τον engine που ζωγραφιζει το gtk θεμα λεει.

 

Αν βαλεις κατι αλλο στις usb, πχ ενα joypad, δουλευει κανονικα?

 

Μπορεις να δοκιμασεις ενα παλιοτερο ή νεοτερο πυρηνα, πχ παιρνοντας αυτον απο το stable ή το testing ή καποιον απο τους liquorix που εχουν ολοκληρο αρχειο.

[linux4linux]

μα δεν γινεται τιποτα...δεν μπορω να καταλαβω...στα φλασακια περναει κανονικα πληροφοριες...στον δισκο αυτο ουτε σβηνει ουτε εγγραφει.....δεν μπορω να αλλαξω και τ;α δικαιωματα του γιατι κολλαει το συμπαν

 

τωρα μου βγαζει σφαλματα γιατι ειναι αναγνωσιμο μονο συστημα αρχειων

 

---------- Προσθήκη στις 20:48 ---------- Προηγούμενο μήνυμα στις 19:47 ----------

 

to dmesg δινει

 

[ 323.944012] usb 3-2: new high speed USB device using ehci_hcd and address 4

[ 324.074241] usb 3-2: New USB device found, idVendor=04b4, idProduct=6830

[ 324.074245] usb 3-2: New USB device strings: Mfr=0, Product=57, SerialNumber=44

[ 324.074248] usb 3-2: Product: Cypress AT2LP

[ 324.074250] usb 3-2: SerialNumber: DEF10E7BC2FD

[ 324.074346] usb 3-2: configuration #1 chosen from 1 choice

[ 324.075305] scsi10 : SCSI emulation for USB Mass Storage devices

[ 324.075416] usb-storage: device found at 4

[ 324.075419] usb-storage: waiting for device to settle before scanning

[ 329.072171] usb-storage: device scan complete

[ 330.545310] scsi 10:0:0:0: Direct-Access SAMSUNG HD400LD 0000 PQ: 0 ANSI: 0

[ 330.545922] sd 10:0:0:0: Attached scsi generic sg4 type 0

[ 330.548684] sd 10:0:0:0: [sdd] 781422768 512-byte hardware sectors: (400 GB/372 GiB)

[ 330.550296] sd 10:0:0:0: [sdd] Write Protect is off

[ 330.550301] sd 10:0:0:0: [sdd] Mode Sense: 27 00 00 00

[ 330.550304] sd 10:0:0:0: [sdd] Assuming drive cache: write through

[ 330.551911] sd 10:0:0:0: [sdd] Assuming drive cache: write through

[ 330.551916] sdd: sdd1

[ 330.578439] sd 10:0:0:0: [sdd] Attached SCSI disk

[ 330.655273] sd 10:0:0:0: [sdd] Sense Key : Recovered Error [current] [descriptor]

[ 330.655280] Descriptor sense data with sense descriptors (in hex):

[ 330.655283] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00

[ 330.655294] 00 00 00 00 e0 50

[ 330.655299] sd 10:0:0:0: [sdd] Add. Sense: ATA pass through information available

[ 330.701020] sd 10:0:0:0: [sdd] Sense Key : Recovered Error [current] [descriptor]

[ 330.701027] Descriptor sense data with sense descriptors (in hex):

[ 330.701030] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00

[ 330.701041] 00 00 00 00 e0 50

[ 330.701046] sd 10:0:0:0: [sdd] Add. Sense: ATA pass through information available

[ 330.708767] sd 10:0:0:0: [sdd] Sense Key : Recovered Error [current] [descriptor]

[ 330.708773] Descriptor sense data with sense descriptors (in hex):

[ 330.708775] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 ff 00 00

[ 330.708786] 00 00 00 00 e0 50

[ 330.708791] sd 10:0:0:0: [sdd] Add. Sense: ATA pass through information available

[ 330.732391] sd 10:0:0:0: [sdd] Sense Key : Recovered Error [current] [descriptor]

[ 330.732396] Descriptor sense data with sense descriptors (in hex):

[ 330.732399] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00

[ 330.732409] 00 4f 00 c2 e0 50

[ 330.732415] sd 10:0:0:0: [sdd] Add. Sense: ATA pass through information available

[ 330.846384] sd 10:0:0:0: [sdd] Sense Key : Recovered Error [current] [descriptor]

[ 330.846391] Descriptor sense data with sense descriptors (in hex):

[ 330.846393] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00

[ 330.846404] 00 4f 00 c2 e0 50

[ 330.846409] sd 10:0:0:0: [sdd] Add. Sense: ATA pass through information available

[ 330.920754] sd 10:0:0:0: [sdd] Sense Key : Recovered Error [current] [descriptor]

[ 330.920760] Descriptor sense data with sense descriptors (in hex):

[ 330.920762] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00

[ 330.920773] 00 4f 00 c2 e0 50

[ 330.920778] sd 10:0:0:0: [sdd] Add. Sense: ATA pass through information available

[ 331.115262] NTFS volume version 3.1.

[ 331.115268] NTFS-fs error (device sdd1): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.

 

 

αλλα τον εβαλα για πειραμα στο vbox και τον εχω κανει ασφαλη καταργηση

[jim_p]

Γιατι κατι πηγε στραβα στην "ασφαλη καταργηση" των windows.

[ 331.115262] NTFS volume version 3.1.

[ 331.115268] NTFS-fs error (device sdd1): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.

Συνδεσε τον σε ενα pc με windows και καντη.

[iobotis]

Καλησπέρα,

κάνε έναν έλεγχο να δεις αν έχεις εγκατεστημένο ntfs-3g.

Λογικά τα φλασάκια θα έχουν filesystem FAT32 που υποστηρίζουν από μόνα τους τα Debian.

Ο σκληρός θα είναι λογικά σε ntfs, που σε Debian υποστηρίζεται η ανάγνωση αλλά όχι η εγγραφή χωρίς το παραπάνω πακέτο.

[linux4linux]

δεν ειναι εκει το θεμα...παντως κατι μου λεει οτι με τον πυρηνα 2.6.32 δεν θα υπαρχει το θεμα...μου φαινεται σε καποια φαση θα το κανω sid το συστημα...ξερετε αν εχει κανενα δυσκολο bug?

[jim_p]

Εχεις ati και για καποιο λογο την θες να δουλευει με τον fglrx? Αν οχι, πηγαινε αφοβα σε unstable, και με το μαλακο με τα dist-upgrades.