gorillas Δημοσ. 9 Δεκεμβρίου 2009 Share Δημοσ. 9 Δεκεμβρίου 2009 Καλημέρα παιδιά! Χθες πήρα την απόφαση να ξαναβάλω Linux αλλά ΜΟΝΟ Linux.Τέλος το Dual Boot.Όλα λειτουργούν άψογα και ΓΡΗΓΟΡΑ. Το μόνο πρόβλημα είναι η εγκατάσταση της Logitech QuickCam Messenger. Η εντολή lsusb μου δίνει το παρακάτω αποτέλεσμα: >Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 152d:2339 JMicron Technology Corp. / JMicron USA Technology Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 046d:08da Logitech, Inc. QuickCam Messanger Bus 002 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Ανεβαίνω πανεπιστήμιο και σε 2 ώρες θα είμαι πίσω... Κάθε βοήθεια ευπρόσδεκτη! Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
jim_p Δημοσ. 9 Δεκεμβρίου 2009 Share Δημοσ. 9 Δεκεμβρίου 2009 Για να παιξει η καμερα σου θελει το module qc-usb. Επειδη δεν υπαρχει ετοιμο, κανεις εγκατασταση το qc-usb-source >sudo apt-get install qc-usb-source και το χτιζεις με ενα απλο >sudo m-a a-i qc-usb-source και τερμα... Θεωρητικα "τερμα", γιατι θυμαμαι οτι ενας φιλος μου που εκανε τα ιδια προσφατα, δεν μπορουσε να χτισει το module επειδη εβγαζε καποιο σφαλμα κατα το χτισιμο και σταματουσε εκει. Τα παρατησε Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
firewalker Δημοσ. 9 Δεκεμβρίου 2009 Share Δημοσ. 9 Δεκεμβρίου 2009 Αν έχεις kernel >= 2.6.28 (νομίζω) τότε ο απαραίτητος driver υπάρχει στον kernel. Είναι λογικά το module gspca_zc3xx. modprobe gspca_zc3xx. Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
gorillas Δημοσ. 9 Δεκεμβρίου 2009 Μέλος Share Δημοσ. 9 Δεκεμβρίου 2009 Για να παιξει η καμερα σου θελει το module qc-usb. Επειδη δεν υπαρχει ετοιμο, κανεις εγκατασταση το qc-usb-source >sudo apt-get install qc-usb-source και το χτιζεις με ενα απλο >sudo m-a a-i qc-usb-source και τερμα... Θεωρητικα "τερμα", γιατι θυμαμαι οτι ενας φιλος μου που εκανε τα ιδια προσφατα, δεν μπορουσε να χτισει το module επειδη εβγαζε καποιο σφαλμα κατα το χτισιμο και σταματουσε εκει. Τα παρατησε Το έκανα αυτό χωρίς να προκύψει σφάλμα αλλά δεν μπόρεσα να χρησιμοποιήσω την κάμερα στο skype.Ούτε εικόνα ούτε ήχος. Όσον αφορά την απάντηση σου firewalker δεν μπορώ να καταλάβω τι ακριβώς πρέπει να κάνω.Δεν είμαι και τόσο εξοικοιωμένος,τα πολύ βασικά γνωρίζω. Ευχαριστώ πάντως για τις απαντήσεις! Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
twiner Δημοσ. 9 Δεκεμβρίου 2009 Share Δημοσ. 9 Δεκεμβρίου 2009 Το πρόγραμμα cheese την βλέπει την κάμερα; Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
firewalker Δημοσ. 9 Δεκεμβρίου 2009 Share Δημοσ. 9 Δεκεμβρίου 2009 Όσον αφορά την απάντηση σου firewalker δεν μπορώ να καταλάβω τι ακριβώς πρέπει να κάνω.Δεν είμαι και τόσο εξοικοιωμένος,τα πολύ βασικά γνωρίζω. Δώσε τις παρακάτω εντολές και πόσταρε ό,τι σου επιστρέψουν. sudo uname -r sudo modprobe -l|grep -i gspca sudo lsmod -l|grep -i gspca sudo dmesg sudo ls -l /dev/vid* Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
gorillas Δημοσ. 9 Δεκεμβρίου 2009 Μέλος Share Δημοσ. 9 Δεκεμβρίου 2009 @firewalker >kostas@WinterWine:~$ sudo uname -r 2.6.31-16-generic kostas@WinterWine:~$ sudo modprobe -l|grep -i gspca kernel/drivers/media/video/gspca/gspca_main.ko kernel/drivers/media/video/gspca/gspca_conex.ko kernel/drivers/media/video/gspca/gspca_etoms.ko kernel/drivers/media/video/gspca/gspca_finepix.ko kernel/drivers/media/video/gspca/gspca_mars.ko kernel/drivers/media/video/gspca/gspca_mr97310a.ko kernel/drivers/media/video/gspca/gspca_ov519.ko kernel/drivers/media/video/gspca/gspca_ov534.ko kernel/drivers/media/video/gspca/gspca_pac207.ko kernel/drivers/media/video/gspca/gspca_pac7311.ko kernel/drivers/media/video/gspca/gspca_sn9c20x.ko kernel/drivers/media/video/gspca/gspca_sonixb.ko kernel/drivers/media/video/gspca/gspca_sonixj.ko kernel/drivers/media/video/gspca/gspca_spca500.ko kernel/drivers/media/video/gspca/gspca_spca501.ko kernel/drivers/media/video/gspca/gspca_spca505.ko kernel/drivers/media/video/gspca/gspca_spca506.ko kernel/drivers/media/video/gspca/gspca_spca508.ko kernel/drivers/media/video/gspca/gspca_spca561.ko kernel/drivers/media/video/gspca/gspca_sq905.ko kernel/drivers/media/video/gspca/gspca_sq905c.ko kernel/drivers/media/video/gspca/gspca_sunplus.ko kernel/drivers/media/video/gspca/gspca_stk014.ko kernel/drivers/media/video/gspca/gspca_t613.ko kernel/drivers/media/video/gspca/gspca_tv8532.ko kernel/drivers/media/video/gspca/gspca_vc032x.ko kernel/drivers/media/video/gspca/gspca_zc3xx.ko kernel/drivers/media/video/gspca/m5602/gspca_m5602.ko kernel/drivers/media/video/gspca/stv06xx/gspca_stv06xx.ko >kostas@WinterWine:~$ sudo lsmod -l|grep -i gspca Usage: lsmod >[ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001dff0 [ 0.000000] On node 0 totalpages: 122763 [ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 928 pages used for memmap [ 0.000000] Normal zone: 117840 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 1e000000 (gap: 1e000000:e0c00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c13c2000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121803 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=5886a9db-1555-4303-b3b8-42588f5648f1 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2457280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 468756k/491456k available (4566k kernel code, 22120k reserved, 2142k data, 540k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xde7f0000 - 0xff7fe000 ( 528 MB) [ 0.000000] lowmem : 0xc0000000 - 0xddff0000 ( 479 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575b94 - 0xc078d3c8 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575b94 (4566 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2667.391 MHz processor. [ 0.001084] Console: colour VGA+ 80x25 [ 0.001090] console [tty0] enabled [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5334.78 BogoMIPS (lpj=10669564) [ 0.004039] Security Framework initialized [ 0.004066] AppArmor: AppArmor initialized [ 0.004077] Mount-cache hash table entries: 512 [ 0.004271] Initializing cgroup subsys ns [ 0.004278] Initializing cgroup subsys cpuacct [ 0.004284] Initializing cgroup subsys memory [ 0.004294] Initializing cgroup subsys freezer [ 0.004297] Initializing cgroup subsys net_cls [ 0.004320] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004325] CPU: L2 cache: 512K [ 0.004328] CPU: Hyper-Threading is disabled [ 0.004333] mce: CPU supports 4 MCE banks [ 0.004346] CPU0: Thermal monitoring enabled (TM1) [ 0.004359] Performance Counters: no PMU driver, software counters only. [ 0.004369] Checking 'hlt' instruction... OK. [ 0.020997] SMP alternatives: switching to UP code [ 0.031611] ACPI: Core revision 20090521 [ 0.040385] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.082876] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09 [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (5334.78 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] Booting paravirtualized kernel on bare hardware [ 0.084001] regulator: core version 0.5 [ 0.084001] Time: 18:32:48 Date: 12/09/09 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] EISA bus registered [ 0.084001] ACPI: bus type pci registered [ 0.104244] PCI: PCI BIOS revision 2.10 entry at 0xfb620, last bus=1 [ 0.104247] PCI: Using configuration type 1 for base access [ 0.105503] bio: create slab <bio-0> at 0 [ 0.106103] ACPI: EC: Look up EC in DSDT [ 0.111541] ACPI: Interpreter enabled [ 0.111550] ACPI: (supports S0 S1 S4 S5) [ 0.111578] ACPI: Using IOAPIC for interrupt routing [ 0.115884] ACPI: No dock devices found. [ 0.116041] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.116106] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff] [ 0.116296] pci 0000:00:02.5: reg 10 io port: [0x00-0x07] [ 0.116304] pci 0000:00:02.5: reg 14 io port: [0x00-0x03] [ 0.116312] pci 0000:00:02.5: reg 18 io port: [0x00-0x07] [ 0.116320] pci 0000:00:02.5: reg 1c io port: [0x00-0x03] [ 0.116329] pci 0000:00:02.5: reg 20 io port: [0xf000-0xf00f] [ 0.116386] pci 0000:00:02.7: reg 10 io port: [0xa000-0xa0ff] [ 0.116394] pci 0000:00:02.7: reg 14 io port: [0xa400-0xa47f] [ 0.116442] pci 0000:00:02.7: supports D1 D2 [ 0.116445] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.116451] pci 0000:00:02.7: PME# disabled [ 0.116479] pci 0000:00:03.0: reg 10 32bit mmio: [0xed104000-0xed104fff] [ 0.116541] pci 0000:00:03.1: reg 10 32bit mmio: [0xed100000-0xed100fff] [ 0.116603] pci 0000:00:03.2: reg 10 32bit mmio: [0xed101000-0xed101fff] [ 0.116676] pci 0000:00:03.3: reg 10 32bit mmio: [0xed102000-0xed102fff] [ 0.116728] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.116733] pci 0000:00:03.3: PME# disabled [ 0.116782] pci 0000:00:04.0: reg 10 io port: [0xa800-0xa8ff] [ 0.116791] pci 0000:00:04.0: reg 14 32bit mmio: [0xed103000-0xed103fff] [ 0.116820] pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.116843] pci 0000:00:04.0: supports D1 D2 [ 0.116845] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.116850] pci 0000:00:04.0: PME# disabled [ 0.116889] pci 0000:00:05.0: reg 10 io port: [0xac00-0xac07] [ 0.116898] pci 0000:00:05.0: reg 14 io port: [0xb000-0xb003] [ 0.116906] pci 0000:00:05.0: reg 18 io port: [0xb400-0xb407] [ 0.116914] pci 0000:00:05.0: reg 1c io port: [0xb800-0xb803] [ 0.116922] pci 0000:00:05.0: reg 20 io port: [0xbc00-0xbc0f] [ 0.116930] pci 0000:00:05.0: reg 24 io port: [0xc000-0xc07f] [ 0.116956] pci 0000:00:05.0: PME# supported from D3cold [ 0.116961] pci 0000:00:05.0: PME# disabled [ 0.117048] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.117056] pci 0000:01:00.0: reg 14 32bit mmio: [0xed000000-0xed01ffff] [ 0.117063] pci 0000:01:00.0: reg 18 io port: [0x9000-0x907f] [ 0.117100] pci 0000:01:00.0: supports D1 D2 [ 0.117142] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] [ 0.117147] pci 0000:00:01.0: bridge 32bit mmio: [0xed000000-0xed0fffff] [ 0.117154] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.117164] pci_bus 0000:00: on NUMA node 0 [ 0.117169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.133622] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.133745] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.133867] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.133996] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.134118] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.134242] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.134365] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.134488] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.134754] SCSI subsystem initialized [ 0.134863] libata version 3.00 loaded. [ 0.134993] usbcore: registered new interface driver usbfs [ 0.135016] usbcore: registered new interface driver hub [ 0.135050] usbcore: registered new device driver usb [ 0.135219] ACPI: WMI: Mapper loaded [ 0.135222] PCI: Using ACPI for IRQ routing [ 0.135406] Bluetooth: Core ver 2.15 [ 0.135452] NET: Registered protocol family 31 [ 0.135454] Bluetooth: HCI device and connection manager initialized [ 0.135459] Bluetooth: HCI socket layer initialized [ 0.135461] NetLabel: Initializing [ 0.135464] NetLabel: domain hash size = 128 [ 0.135466] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.135484] NetLabel: unlabeled traffic allowed by default [ 0.137950] pnp: PnP ACPI init [ 0.137996] ACPI: bus type pnp registered [ 0.141454] pnp: PnP ACPI: found 11 devices [ 0.141457] ACPI: ACPI bus type pnp unregistered [ 0.141464] PnPBIOS: Disabled by ACPI PNP [ 0.141487] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.141492] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.141495] system 00:01: ioport range 0x800-0x805 has been reserved [ 0.141507] system 00:0a: iomem range 0xf0000-0xf3fff could not be reserved [ 0.141510] system 00:0a: iomem range 0xf4000-0xf7fff could not be reserved [ 0.141514] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.141518] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.141521] system 00:0a: iomem range 0x1dff0000-0x1dffffff could not be reserved [ 0.141525] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved [ 0.141529] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.141532] system 00:0a: iomem range 0x100000-0x1dfeffff could not be reserved [ 0.141536] system 00:0a: iomem range 0xffee0000-0xffefffff has been reserved [ 0.141539] system 00:0a: iomem range 0xfffe0000-0xfffeffff has been reserved [ 0.141543] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.141547] system 00:0a: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.176308] AppArmor: AppArmor Filesystem Enabled [ 0.176341] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.176345] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.176353] pci 0000:00:01.0: MEM window: 0xed000000-0xed0fffff [ 0.176359] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff [ 0.176378] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.176382] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.176386] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.176389] pci_bus 0000:01: resource 1 mem: [0xed000000-0xed0fffff] [ 0.176392] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] [ 0.176448] NET: Registered protocol family 2 [ 0.176581] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.176940] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.177072] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.177198] TCP: Hash tables configured (established 16384 bind 16384) [ 0.177201] TCP reno registered [ 0.177307] NET: Registered protocol family 1 [ 0.177403] Trying to unpack rootfs image as initramfs... [ 0.431622] Freeing initrd memory: 7470k freed [ 0.445223] cpufreq-nforce2: No nForce2 chipset. [ 0.445267] Scanning for low memory corruption every 60 seconds [ 0.445441] audit: initializing netlink socket (disabled) [ 0.445473] type=2000 audit(1260383568.444:1): initialized [ 0.453710] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.455362] VFS: Disk quotas dquot_6.5.2 [ 0.455439] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.456174] fuse init (API version 7.12) [ 0.456281] msgmni has been set to 930 [ 0.456571] alg: No test for stdrng (krng) [ 0.456589] io scheduler noop registered [ 0.456592] io scheduler anticipatory registered [ 0.456595] io scheduler deadline registered [ 0.456658] io scheduler cfq registered (default) [ 0.456739] pci 0000:01:00.0: Boot video device [ 0.456844] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.456874] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.457041] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.457048] ACPI: Power Button [PWRF] [ 0.457120] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.457125] ACPI: Power Button [PWRB] [ 0.457461] processor LNXCPU:00: registered as cooling_device0 [ 0.459301] isapnp: Scanning for PnP cards... [ 0.680034] Switched to high resolution mode on CPU 0 [ 0.812848] isapnp: No Plug & Play device found [ 0.814391] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.814516] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.814618] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.814960] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.815094] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.816380] brd: module loaded [ 0.816933] loop: module loaded [ 0.817055] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.817285] sata_sis 0000:00:05.0: version 1.0 [ 0.817317] alloc irq_desc for 17 on node -1 [ 0.817321] alloc kstat_irqs on node -1 [ 0.817333] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.817340] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode [ 0.817547] scsi0 : sata_sis [ 0.817698] scsi1 : sata_sis [ 0.817759] ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xb000 bmdma 0xbc00 irq 17 [ 0.817765] ata2: SATA max UDMA/133 cmd 0xb400 ctl 0xb800 bmdma 0xbc08 irq 17 [ 0.818248] pata_sis 0000:00:02.5: version 0.5.2 [ 0.818261] alloc irq_desc for 16 on node -1 [ 0.818264] alloc kstat_irqs on node -1 [ 0.818271] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.818501] scsi2 : pata_sis [ 0.818608] scsi3 : pata_sis [ 0.819594] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.819597] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.820099] Fixed MDIO Bus: probed [ 0.820147] PPP generic driver version 2.4.2 [ 0.820302] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.820338] alloc irq_desc for 23 on node -1 [ 0.820341] alloc kstat_irqs on node -1 [ 0.820350] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.820374] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.820455] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.820505] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported [ 0.820525] ehci_hcd 0000:00:03.3: irq 23, io mem 0xed102000 [ 0.832016] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.832166] usb usb1: configuration #1 chosen from 1 choice [ 0.832209] hub 1-0:1.0: USB hub found [ 0.832223] hub 1-0:1.0: 8 ports detected [ 0.832322] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.832365] alloc irq_desc for 20 on node -1 [ 0.832369] alloc kstat_irqs on node -1 [ 0.832378] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.832400] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.832450] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.832481] ohci_hcd 0000:00:03.0: irq 20, io mem 0xed104000 [ 0.890076] usb usb2: configuration #1 chosen from 1 choice [ 0.890113] hub 2-0:1.0: USB hub found [ 0.890128] hub 2-0:1.0: 3 ports detected [ 0.890183] alloc irq_desc for 21 on node -1 [ 0.890187] alloc kstat_irqs on node -1 [ 0.890193] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.890205] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.890256] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.890280] ohci_hcd 0000:00:03.1: irq 21, io mem 0xed100000 [ 0.946073] usb usb3: configuration #1 chosen from 1 choice [ 0.946108] hub 3-0:1.0: USB hub found [ 0.946125] hub 3-0:1.0: 3 ports detected [ 0.946180] alloc irq_desc for 22 on node -1 [ 0.946183] alloc kstat_irqs on node -1 [ 0.946188] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.946201] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 0.946242] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 0.946266] ohci_hcd 0000:00:03.2: irq 22, io mem 0xed101000 [ 0.992247] ata3.00: HPA unlocked: 234439535 -> 234441648, native 234441648 [ 0.992254] ata3.00: ATA-6: WDC WD1200JB-00GVA0, 08.02D08, max UDMA/100 [ 0.992258] ata3.00: 234441648 sectors, multi 16: LBA48 [ 1.002096] usb usb4: configuration #1 chosen from 1 choice [ 1.002132] hub 4-0:1.0: USB hub found [ 1.002146] hub 4-0:1.0: 2 ports detected [ 1.002212] uhci_hcd: USB Universal Host Controller Interface driver [ 1.002350] PNP: No PS/2 controller found. Probing ports directly. [ 1.038715] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.038718] If AUX port is really absent please use the 'i8042.noaux' option. [ 1.045569] ata3.00: configured for UDMA/100 [ 1.154768] ata1: SATA link down (SStatus 0 SControl 300) [ 1.288087] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.288208] mice: PS/2 mouse device common for all mice [ 1.288324] rtc_cmos 00:03: RTC can wake from S4 [ 1.288373] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.288399] rtc0: alarms up to one year, 242 bytes nvram [ 1.288551] device-mapper: uevent: version 1.0.3 [ 1.288700] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] [ 1.288807] device-mapper: multipath: version 1.1.0 loaded [ 1.288811] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.288977] EISA: Probing bus 0 at eisa.0 [ 1.288987] Cannot allocate resource for EISA slot 1 [ 1.289014] EISA: Detected 0 cards. [ 1.289077] cpuidle: using governor ladder [ 1.289081] cpuidle: using governor menu [ 1.289754] TCP cubic registered [ 1.289926] NET: Registered protocol family 10 [ 1.290483] lo: Disabled Privacy Extensions [ 1.290859] NET: Registered protocol family 17 [ 1.290891] Bluetooth: L2CAP ver 2.13 [ 1.290894] Bluetooth: L2CAP socket layer initialized [ 1.290897] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.290899] Bluetooth: SCO socket layer initialized [ 1.290968] Bluetooth: RFCOMM TTY layer initialized [ 1.290973] Bluetooth: RFCOMM socket layer initialized [ 1.290975] Bluetooth: RFCOMM ver 1.11 [ 1.291033] Using IPI No-Shortcut mode [ 1.291145] PM: Resume from disk failed. [ 1.291176] registered taskstats version 1 [ 1.291309] Magic number: 5:101:544 [ 1.291421] rtc_cmos 00:03: setting system clock to 2009-12-09 18:32:50 UTC (1260383570) [ 1.291426] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.291428] EDD information not available. [ 1.482754] ata2: SATA link down (SStatus 0 SControl 300) [ 1.482953] scsi 2:0:0:0: Direct-Access ATA WDC WD1200JB-00G 08.0 PQ: 0 ANSI: 5 [ 1.483132] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.483184] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.483247] sd 2:0:0:0: [sda] Write Protect is off [ 1.483251] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.483282] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.483453] sda: sda1 sda2 < sda5 [ 1.512021] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 1.523498] sda6 > [ 1.523893] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.644281] ata4.00: ATAPI: PIONEER DVD-RW DVR-107D, 1.22, max UDMA/33 [ 1.652298] ata4.00: configured for UDMA/33 [ 1.659226] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-107D 1.22 PQ: 0 ANSI: 5 [ 1.682614] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.682620] Uniform CD-ROM driver Revision: 3.20 [ 1.682740] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.682817] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.682859] Freeing unused kernel memory: 540k freed [ 1.683695] Write protecting the kernel text: 4568k [ 1.683727] Write protecting the kernel read-only data: 1836k [ 1.736174] usb 2-1: configuration #1 chosen from 1 choice [ 1.913339] Linux agpgart interface v0.103 [ 1.917464] agpgart-sis 0000:00:00.0: SiS chipset [1039/0661] [ 1.924900] Floppy drive(s): fd0 is 1.44M [ 1.956824] FDC 0 is a post-1991 82077 [ 1.958182] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000 [ 1.958905] sis900.c: v1.08.10 Apr. 2 2006 [ 1.958979] alloc irq_desc for 19 on node -1 [ 1.958982] alloc kstat_irqs on node -1 [ 1.958994] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.960119] 0000:00:04.0: ICS LAN PHY transceiver found at address 1. [ 1.970916] 0000:00:04.0: Using transceiver found at address 1 as default [ 2.076630] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 2.098099] eth0: SiS 900 PCI Fast Ethernet at 0xa800, IRQ 19, 00:0f:ea:ff:41:38 [ 2.295142] usb 2-2: configuration #1 chosen from 1 choice [ 2.309142] usbcore: registered new interface driver hiddev [ 2.309269] usbcore: registered new interface driver usbhid [ 2.309273] usbhid: v2.6:USB HID core driver [ 2.320511] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input3 [ 2.320623] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:03.0-2/input0 [ 2.330007] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 2.331201] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.1/input/input4 [ 2.331396] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:03.0-2/input1 [ 3.236415] PM: Starting manual resume from disk [ 3.236423] PM: Resume from partition 8:6 [ 3.236425] PM: Checking hibernation image. [ 3.236650] PM: Resume from disk failed. [ 3.254294] EXT4-fs (sda1): barriers enabled [ 3.268229] kjournald2 starting: pid 337, dev sda1:8, commit interval 5 seconds [ 3.268257] EXT4-fs (sda1): delayed allocation enabled [ 3.268262] EXT4-fs: file extents enabled [ 3.270898] EXT4-fs: mballoc enabled [ 3.270919] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.716030] type=1505 audit(1260383572.924:2): operation="profile_load" pid=360 name=/usr/share/gdm/guest-session/Xsession [ 3.719703] type=1505 audit(1260383572.924:3): operation="profile_load" pid=361 name=/sbin/dhclient3 [ 3.720353] type=1505 audit(1260383572.928:4): operation="profile_load" pid=361 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.720693] type=1505 audit(1260383572.928:5): operation="profile_load" pid=361 name=/usr/lib/connman/scripts/dhclient-script [ 3.776189] type=1505 audit(1260383572.984:6): operation="profile_load" pid=362 name=/usr/bin/evince [ 3.787435] type=1505 audit(1260383572.992:7): operation="profile_load" pid=362 name=/usr/bin/evince-previewer [ 3.793829] type=1505 audit(1260383573.000:8): operation="profile_load" pid=362 name=/usr/bin/evince-thumbnailer [ 3.815253] type=1505 audit(1260383573.020:9): operation="profile_load" pid=364 name=/usr/lib/cups/backend/cups-pdf [ 3.816067] type=1505 audit(1260383573.024:10): operation="profile_load" pid=364 name=/usr/sbin/cupsd [ 11.604397] udev: starting version 147 [ 11.605642] Adding 1052216k swap on /dev/sda6. Priority:-1 extents:1 across:1052216k [ 11.673905] lp: driver loaded but no devices found [ 11.826841] EXT4-fs (sda1): internal journal on sda1:8 [ 12.207462] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.213430] parport_pc 00:09: reported by Plug and Play ACPI [ 12.213514] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 12.224858] Linux video capture interface: v2.00 [ 12.227956] gspca: main v2.6.0 registered [ 12.230927] gspca: probing 046d:08da [ 12.289318] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.314276] lp0: using parport0 (interrupt-driven). [ 12.338005] ppdev: user-space parallel port driver [ 12.399366] alloc irq_desc for 18 on node -1 [ 12.399372] alloc kstat_irqs on node -1 [ 12.399383] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 12.752134] intel8x0_measure_ac97_clock: measured 53099 usecs (2555 samples) [ 12.752140] intel8x0: clocking to 48000 [ 13.002500] __ratelimit: 3 callbacks suppressed [ 13.002506] type=1505 audit(1260383582.208:12): operation="profile_replace" pid=842 name=/usr/share/gdm/guest-session/Xsession [ 13.005552] type=1505 audit(1260383582.212:13): operation="profile_replace" pid=843 name=/sbin/dhclient3 [ 13.029069] type=1505 audit(1260383582.236:14): operation="profile_replace" pid=843 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 13.029420] type=1505 audit(1260383582.236:15): operation="profile_replace" pid=843 name=/usr/lib/connman/scripts/dhclient-script [ 13.055934] type=1505 audit(1260383582.260:16): operation="profile_replace" pid=845 name=/usr/bin/evince [ 13.082346] type=1505 audit(1260383582.288:17): operation="profile_replace" pid=845 name=/usr/bin/evince-previewer [ 13.114347] type=1505 audit(1260383582.320:18): operation="profile_replace" pid=845 name=/usr/bin/evince-thumbnailer [ 13.133693] type=1505 audit(1260383582.340:19): operation="profile_replace" pid=867 name=/usr/lib/cups/backend/cups-pdf [ 13.134438] type=1505 audit(1260383582.340:20): operation="profile_replace" pid=867 name=/usr/sbin/cupsd [ 13.137923] type=1505 audit(1260383582.344:21): operation="profile_replace" pid=868 name=/usr/sbin/tcpdump [ 14.467654] zc3xx: probe 2wr ov vga 0x0000 [ 14.539654] zc3xx: probe sensor -> 0011 [ 14.539659] zc3xx: Find Sensor HV7131R(c) [ 14.551786] gspca: probe ok [ 14.551826] gspca: probing 046d:08da [ 14.551853] gspca: probing 046d:08da [ 14.551886] usbcore: registered new interface driver zc3xx [ 14.551891] zc3xx: registered [ 14.556622] STV06xx: Probing for a stv06xx device [ 14.556631] gspca: probing 046d:08da [ 14.556785] STV06xx: Probing for a stv06xx device [ 14.556789] gspca: probing 046d:08da [ 14.556841] usbcore: registered new interface driver STV06xx [ 14.556847] STV06xx: registered [ 14.661162] usbcore: registered new interface driver snd-usb-audio [ 14.860729] eth0: Media Link On 100mbps full-duplex [ 22.984011] eth0: no IPv6 routers present >kostas@WinterWine:~$ sudo ls -l /dev/vid* crw-rw----+ 1 root video 81, 0 2009-12-09 20:33 /dev/video0 @twiner Το πρόγραμμα Cheese την βλέπει κανονικά την κάμερα. Παιδιά συγνώμη για την καθυστέρηση αλλά πολύ φασίνα. Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
firewalker Δημοσ. 9 Δεκεμβρίου 2009 Share Δημοσ. 9 Δεκεμβρίου 2009 Λοιπόν... Η καμερά σου αναγνωρίζετε κανονικά αφού παίζει με κάποιο πρόγραμμα (cheese). Μήπως κάνεις κάτι λάθος στο skype; Δοκίμασε: mplayer -fps 25 -tv driver=v4l:width=320:height=240:device=/dev/video0 tv:// ή με skype κ.τ.λ. Αν δεν παίξει δώσε export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so (ίσως χριάζεται αλλαγή σύμφωνα με την θέση του v4l1compat.so του πακέτου libv4l) και μετά δοκίμασε τις παραπάνω πάλι. Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
gtroza Δημοσ. 9 Δεκεμβρίου 2009 Share Δημοσ. 9 Δεκεμβρίου 2009 τρεξε το xsane να δεις αν κανει scan . Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
gorillas Δημοσ. 9 Δεκεμβρίου 2009 Μέλος Share Δημοσ. 9 Δεκεμβρίου 2009 Μόλις έδωσα >export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so και μετά την εντολή έπαιξε το mplayer.Αλλά πρέπει να την δίνω κάθε φορά.To skype τίποτα.Δεν μου δίνει και επιλογή στο μικρόφωνο να βάλω της κάμερας. Πατάω να αλλαξω και παγώνει. Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
Προτεινόμενες αναρτήσεις
Αρχειοθετημένο
Αυτό το θέμα έχει αρχειοθετηθεί και είναι κλειστό για περαιτέρω απαντήσεις.