suser Δημοσ. 7 Αυγούστου 2009 Share Δημοσ. 7 Αυγούστου 2009 Γεια σας, προσφατα αγορασα ενα netbook απο το πλαισιο και δεν μπορω να καταλαβω ποιος ειναι ο driver για τη wireless καρτα. Επειδη ομως δεν εχω πολυ χρονο διοτι φευγω ταξιδι θελω μεχρι σημερα το μεσημερι να το εχω φτιαξει. Παραθετω τα συνηθισμενα στοιχεια: lspci: >00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) ifconfig: >eth0 Link encap:Ethernet HWaddr 00:e0:4c:00:02:e4 inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:4cff:fe00:2e4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76145 errors:0 dropped:0 overruns:0 frame:0 TX packets:45785 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:110649702 (110.6 MB) TX bytes:3879010 (3.8 MB) Interrupt:254 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:187 errors:0 dropped:0 overruns:0 frame:0 TX packets:187 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15489 (15.4 KB) TX bytes:15489 (15.4 KB) pan0 Link encap:Ethernet HWaddr fe:9a:3c:a6:e2:e5 inet6 addr: fe80::fc9a:3cff:fea6:e2e5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 TX bytes:468 (468.0 Οποιος μπορει ας βοηθησει. Ευχαριστω! ---------- Το μήνυμα προστέθηκε στις 12:21 ---------- Λοιπον φορτωσα το module της realtek καρτας: modprobe r8169. Αλλα παλι με την εντολη iwconfig το αποτελεσμα ειναι: lo no wireless extensions. eth0 no wireless extensions. pan0 no wireless extensions. Τι να κανω; Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
apoikos Δημοσ. 7 Αυγούστου 2009 Share Δημοσ. 7 Αυγούστου 2009 Η κάρτα σου είναι κατά 99% USB. Δώσε lsusb -v και κάνει paste την έξοδο. Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
suser Δημοσ. 7 Αυγούστου 2009 Μέλος Share Δημοσ. 7 Αυγούστου 2009 Πεσαμε στο 1% διοτι δεν ειναι usb. Η εξοδος του lsusb -v ειναι: > iSerial 1 0000:00:1d.3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.28-11-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 003 Device 003: ID 046d:c51b Logitech, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc51b bcdDevice 46.00 iManufacturer 1 Logitech iProduct 2 USB Receiver iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 4 RR46.00_B0001 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 98mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 67 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 27 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.28-11-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0303 lowspeed power enable connect Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.28-11-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 001 Device 002: ID 0c45:62c0 Microdia Pavilion Webcam Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x0c45 Microdia idProduct 0x62c0 Pavilion Webcam bcdDevice 1.00 iManufacturer 2 Sonix Technology Co., Ltd. iProduct 1 USB 2.0 Camera iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 645 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 168mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 14 Video bFunctionSubClass 3 Video Interface Collection bFunctionProtocol 0 iFunction 5 USB Camera Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 1 Video Control bInterfaceProtocol 0 iInterface 5 USB Camera VideoControl Interface Descriptor: bLength 13 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdUVC 1.00 wTotalLength 103 dwClockFrequency 15.000000MHz bInCollection 1 baInterfaceNr( 0) 1 VideoControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 5 iTerminal 0 VideoControl Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 6 (EXTENSION_UNIT) bUnitID 4 guidExtensionCode {7033f028-1163-2e4a-ba2c-6890eb334016} bNumControl 8 bNrPins 1 baSourceID( 0) 3 bControlSize 1 bmControls( 0) 0x0f iExtension 0 VideoControl Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 6 (EXTENSION_UNIT) bUnitID 5 guidExtensionCode {3fae1228-d7bc-114e-a357-6f1edef7d61d} bNumControl 8 bNrPins 1 baSourceID( 0) 4 bControlSize 1 bmControls( 0) 0xff iExtension 0 VideoControl Interface Descriptor: bLength 18 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Camera Sensor bAssocTerminal 0 iTerminal 0 wObjectiveFocalLengthMin 0 wObjectiveFocalLengthMax 0 wOcularFocalLength 0 bControlSize 3 bmControls 0x00000a2a Auto-Exposure Mode Exposure Time (Absolute) Focus (Absolute) Zoom (Absolute) PanTilt (Absolute) VideoControl Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 5 (PROCESSING_UNIT) Warning: Descriptor too short bUnitID 3 bSourceID 1 wMaxMultiplier 0 bControlSize 2 bmControls 0x0000073f Brightness Contrast Hue Saturation Sharpness Gamma Backlight Compensation Gain Power Line Frequency iProcessing 0 bmVideoStandards 0x 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 6 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 VideoStreaming Interface Descriptor: bLength 14 bDescriptorType 36 bDescriptorSubtype 1 (INPUT_HEADER) bNumFormats 1 wTotalLength 399 bEndPointAddress 129 bmInfo 0 bTerminalLink 2 bStillCaptureMethod 2 bTriggerSupport 0 bTriggerUsage 0 bControlSize 1 bmaControls( 0) 27 VideoStreaming Interface Descriptor: bLength 27 bDescriptorType 36 bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED) bFormatIndex 1 bNumFrameDescriptors 7 guidFormat {59555932-0000-1000-8000-00aa00389b71} bBitsPerPixel 16 bDefaultFrameIndex 1 bAspectRatioX 0 bAspectRatioY 0 bmInterlaceFlags 0x00 Interlaced stream or variable: No Fields per frame: 1 fields Field 1 first: No Field pattern: Field 1 only bCopyProtect 0 VideoStreaming Interface Descriptor: bLength 50 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 1 bmCapabilities 0x00 Still image unsupported wWidth 640 wHeight 480 dwMinBitRate 3072000 dwMaxBitRate 18432000 dwMaxVideoFrameBufferSize 614400 dwDefaultFrameInterval 333333 bFrameIntervalType 6 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 400000 dwFrameInterval( 2) 500000 dwFrameInterval( 3) 666666 dwFrameInterval( 4) 1000000 dwFrameInterval( 5) 2000000 VideoStreaming Interface Descriptor: bLength 50 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 2 bmCapabilities 0x00 Still image unsupported wWidth 352 wHeight 288 dwMinBitRate 1013760 dwMaxBitRate 6082560 dwMaxVideoFrameBufferSize 202752 dwDefaultFrameInterval 333333 bFrameIntervalType 6 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 400000 dwFrameInterval( 2) 500000 dwFrameInterval( 3) 666666 dwFrameInterval( 4) 1000000 dwFrameInterval( 5) 2000000 VideoStreaming Interface Descriptor: bLength 50 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 3 bmCapabilities 0x00 Still image unsupported wWidth 320 wHeight 240 dwMinBitRate 768000 dwMaxBitRate 4608000 dwMaxVideoFrameBufferSize 153600 dwDefaultFrameInterval 333333 bFrameIntervalType 6 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 400000 dwFrameInterval( 2) 500000 dwFrameInterval( 3) 666666 dwFrameInterval( 4) 1000000 dwFrameInterval( 5) 2000000 VideoStreaming Interface Descriptor: bLength 50 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 4 bmCapabilities 0x00 Still image unsupported wWidth 176 wHeight 144 dwMinBitRate 253440 dwMaxBitRate 1520640 dwMaxVideoFrameBufferSize 50688 dwDefaultFrameInterval 333333 bFrameIntervalType 6 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 400000 dwFrameInterval( 2) 500000 dwFrameInterval( 3) 666666 dwFrameInterval( 4) 1000000 dwFrameInterval( 5) 2000000 VideoStreaming Interface Descriptor: bLength 50 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 5 bmCapabilities 0x00 Still image unsupported wWidth 160 wHeight 120 dwMinBitRate 192000 dwMaxBitRate 1152000 dwMaxVideoFrameBufferSize 38400 dwDefaultFrameInterval 333333 bFrameIntervalType 6 dwFrameInterval( 0) 333333 dwFrameInterval( 1) 400000 dwFrameInterval( 2) 500000 dwFrameInterval( 3) 666666 dwFrameInterval( 4) 1000000 dwFrameInterval( 5) 2000000 VideoStreaming Interface Descriptor: bLength 34 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 6 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 960 dwMinBitRate 12288000 dwMaxBitRate 22118400 dwMaxVideoFrameBufferSize 2457600 dwDefaultFrameInterval 1111111 bFrameIntervalType 2 dwFrameInterval( 0) 1111111 dwFrameInterval( 1) 2000000 VideoStreaming Interface Descriptor: bLength 34 bDescriptorType 36 bDescriptorSubtype 5 (FRAME_UNCOMPRESSED) bFrameIndex 7 bmCapabilities 0x00 Still image unsupported wWidth 1280 wHeight 1024 dwMinBitRate 13107200 dwMaxBitRate 23592960 dwMaxVideoFrameBufferSize 2621440 dwDefaultFrameInterval 1111111 bFrameIntervalType 2 dwFrameInterval( 0) 1111111 dwFrameInterval( 1) 2000000 VideoStreaming Interface Descriptor: bLength 34 bDescriptorType 36 bDescriptorSubtype 3 (STILL_IMAGE_FRAME) bEndpointAddress 0 bNumImageSizePatterns 7 wWidth( 0) 640 wHeight( 0) 480 wWidth( 1) 352 wHeight( 1) 288 wWidth( 2) 320 wHeight( 2) 240 wWidth( 3) 176 wHeight( 3) 144 wWidth( 4) 160 wHeight( 4) 120 wWidth( 5) 1280 wHeight( 5) 1024 wWidth( 6) 1280 wHeight( 6) 960 bNumCompressionPatterns 7 VideoStreaming Interface Descriptor: bLength 6 bDescriptorType 36 bDescriptorSubtype 13 (COLORFORMAT) bColorPrimaries 1 (BT.709,sRGB) bTransferCharacteristics 1 (BT.709) bMatrixCoefficients 4 (SMPTE 170M (BT.601)) Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0080 1x 128 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0100 1x 256 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0320 1x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 4 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0b20 2x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 5 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x1320 3x 800 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 6 bNumEndpoints 1 bInterfaceClass 14 Video bInterfaceSubClass 2 Video Streaming bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x1400 3x 1024 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.28-11-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:1d.7 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 8 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0503 highspeed power enable connect Port 6: 0000.0503 highspeed power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 001 Device 003: ID 05e1:0100 Syntek Semiconductor Co., Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05e1 Syntek Semiconductor Co., Ltd idProduct 0x0100 bcdDevice 0.02 iManufacturer 1 Syntek Semi Co.. iProduct 2 WiFi USB Dongle iSerial 3 Manufacture bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 97 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 5 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 5 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x08 EP 8 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
jim_p Δημοσ. 7 Αυγούστου 2009 Share Δημοσ. 7 Αυγούστου 2009 Εισαι σιγουρος οτι εχει ασυρματο? Επειδη το lsusb -vv το θεωρω πολυ, κανε ποσταρε μονο το lsusb και αν γινεται φροντισε να μην εχεις καποια usb συσκευη συνδεδεμενη πανω οταν το κανεις. Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
Στελλίνα Δημοσ. 10 Αυγούστου 2009 Share Δημοσ. 10 Αυγούστου 2009 Κατέβασε απο εδω http://www.3dsp.com.cn/web_html/download.html το USB_Dongle for ubuntu. Βάλε ακριβως τον kernel που θέλει (κατέβασέ το απ'το site της ubuntu) και κάνε εγκατάσταση τον driver που σου ειπα. Δουλεύει άψογα και έχει και ωραίο gui. Το interface θα είναι κάτι σαν twifiu0 Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
suser Δημοσ. 10 Αυγούστου 2009 Μέλος Share Δημοσ. 10 Αυγούστου 2009 Εισαι σιγουρος οτι εχει ασυρματο? Επειδη το lsusb -vv το θεωρω πολυ, κανε ποσταρε μονο το lsusb και αν γινεται φροντισε να μην εχεις καποια usb συσκευη συνδεδεμενη πανω οταν το κανεις. 99% δεν είναι usb και γι' αυτό δεν το εμφανίζει. Κατέβασε απο εδω http://www.3dsp.com.cn/web_html/download.html το USB_Dongle for ubuntu. Βάλε ακριβως τον kernel που θέλει (κατέβασέ το απ'το site της ubuntu) και κάνε εγκατάσταση τον driver που σου ειπα. Δουλεύει άψογα και έχει και ωραίο gui. Το interface θα είναι κάτι σαν twifiu0 Σε ευχαριστώ για τη λύση θα το δοκιμάσω μόλις επιστρέψω από τις διακοπές. Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
firewalker Δημοσ. 10 Αυγούστου 2009 Share Δημοσ. 10 Αυγούστου 2009 Είναι USB. > Bus 001 Device 003: ID 05e1:0100 Syntek Semiconductor Co., Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05e1 Syntek Semiconductor Co., Ltd idProduct 0x0100 bcdDevice 0.02 iManufacturer 1 Syntek Semi Co.. iProduct 2 [b]WiFi USB Dongle[/b] iSerial 3 Manufacture bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 97 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 5 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 5 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x08 EP 8 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bluetooth με WiFi μαζί. http://www.stk.com.tw/product-01.asp?Product_Type=58 Κάτι λέει για Ubuntu. Πρέπει να είναι αυτό που σου είπε η Στελλίνα. Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
suser Δημοσ. 22 Αυγούστου 2009 Μέλος Share Δημοσ. 22 Αυγούστου 2009 Τελικά έχετε δίκιο το έγραφε και στις οδηγίες λάθος, είναι usb. ---------- Το μήνυμα προστέθηκε στις 11:28 ---------- Stellina, κατέβασα το usb for dongle για ubuntu και μόλις έτρεξα την εντολή # bash Install_3DSPUSB.sh η απάντηση ήταν: ># bash Install_3DSPUSB.sh * Checking user... [ Ok ] * Verifying kernel... [ Ok ] * Checking files... [ Ok ] Install_3DSPUSB.sh: line 149: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 13: $LOGFILE: ambiguous redirect * Copying modules...Install_3DSPUSB.sh: line 13: $LOGFILE: ambiguous redirect [ Ok ] * Installing utilities...Install_3DSPUSB.sh: line 13: $LOGFILE: ambiguous redirect [ Ok ] Install_3DSPUSB.sh: line 13: $LOGFILE: ambiguous redirect * Installing 3dsp-wifi-radar...Install_3DSPUSB.sh: line 13: $LOGFILE: ambiguous redirect 3dsp-wifi-radar/ 3dsp-wifi-radar/debian/ 3dsp-wifi-radar/debian/wifi-radar.dirs 3dsp-wifi-radar/debian/copyright 3dsp-wifi-radar/debian/control 3dsp-wifi-radar/debian/wifi-radar.init 3dsp-wifi-radar/debian/postrm 3dsp-wifi-radar/debian/compat 3dsp-wifi-radar/debian/wifi-radar.docs 3dsp-wifi-radar/debian/README.Debian 3dsp-wifi-radar/debian/changelog 3dsp-wifi-radar/debian/wifi-radar.manpages 3dsp-wifi-radar/debian/postinst 3dsp-wifi-radar/debian/rules 3dsp-wifi-radar/wifi-radar.localized 3dsp-wifi-radar/pixmaps/ 3dsp-wifi-radar/pixmaps/signal_barely.xpm 3dsp-wifi-radar/pixmaps/signal_low.xpm 3dsp-wifi-radar/pixmaps/strength.xcf 3dsp-wifi-radar/pixmaps/connected3.png 3dsp-wifi-radar/pixmaps/known_profile.png 3dsp-wifi-radar/pixmaps/connected2.png 3dsp-wifi-radar/pixmaps/signal_best.xpm 3dsp-wifi-radar/pixmaps/wifi-radar.png 3dsp-wifi-radar/pixmaps/connected1.png 3dsp-wifi-radar/pixmaps/wifi_radar_32x32.png 3dsp-wifi-radar/pixmaps/signal_none.xpm 3dsp-wifi-radar/pixmaps/unknown_profile.png 3dsp-wifi-radar/pixmaps/connected4.png 3dsp-wifi-radar/pixmaps/wifi-radar.svg 3dsp-wifi-radar/pixmaps/signal_ok.xpm 3dsp-wifi-radar/pixmaps/wifi_radar_inkscape.svg 3dsp-wifi-radar/wifi-radar 3dsp-wifi-radar/wifi-radar.desktop 3dsp-wifi-radar/doc/ 3dsp-wifi-radar/doc/3dsp-wifi-radar.files/ 3dsp-wifi-radar/doc/3dsp-wifi-radar.files/image004.jpg 3dsp-wifi-radar/doc/3dsp-wifi-radar.files/image003.gif 3dsp-wifi-radar/doc/3dsp-wifi-radar.files/Thumbs.db 3dsp-wifi-radar/doc/3dsp-wifi-radar.files/image007.jpg 3dsp-wifi-radar/doc/3dsp-wifi-radar.files/image008.jpg 3dsp-wifi-radar/doc/3dsp-wifi-radar.files/image001.jpg 3dsp-wifi-radar/doc/3dsp-wifi-radar.files/image006.jpg 3dsp-wifi-radar/doc/3dsp-wifi-radar.files/image005.jpg 3dsp-wifi-radar/doc/3dsp-wifi-radar.files/image002.gif 3dsp-wifi-radar/doc/3dsp-wifi-radar.html 3dsp-wifi-radar/wifi-radar.ebuild 3dsp-wifi-radar/Makefile 3dsp-wifi-radar/VERSION 3dsp-wifi-radar/init_script 3dsp-wifi-radar/wifi-radar.conf 3dsp-wifi-radar/wifi-radar~ Install_3DSPUSB.sh: line 20: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 21: $LOGFILE: ambiguous redirect make: /etc/wifi-radar/Makefile: No such file or directory make: *** No rule to make target `/etc/wifi-radar/Makefile'. Stop. Makefile:84: warning: overriding commands for target `/home/anastasis/Επιφάνεια' Makefile:80: warning: ignoring old commands for target `/home/anastasis/Επιφάνεια' Makefile:84: warning: overriding commands for target `εργασίας/bluewu2.2.04.20090717_ubuntu9.04_withouthotkey/apptools/3dsp-wifi-radar/tmp/wifi-radar-3DSP' Makefile:80: warning: ignoring old commands for target `εργασίας/bluewu2.2.04.20090717_ubuntu9.04_withouthotkey/apptools/3dsp-wifi-radar/tmp/wifi-radar-3DSP' Makefile:84: warning: overriding commands for target `WiFi' Makefile:80: warning: ignoring old commands for target `WiFi' Makefile:84: warning: overriding commands for target `Radar' Makefile:80: warning: ignoring old commands for target `Radar' cp wifi-radar wifi-radar.tmp perl -pi -e 's#^WIFI_RADAR_VERSION\s+=.*#WIFI_RADAR_VERSION = "3DSP WiFi Radar 0.3.1"#' wifi-radar.tmp perl -pi -e 's#^CONF_FILE\s+=.*#CONF_FILE = "/etc/wifi-radar/wifi-radar.conf"#' wifi-radar.tmp mv wifi-radar.tmp wifi-radar.localized test -d /etc/wifi-radar || install -d -m 755 /etc/wifi-radar test -e /etc/wifi-radar/wifi-radar.conf || install -m 644 wifi-radar.conf /etc/wifi-radar test -e /etc/wifi-radar/Makefile || install -m 644 Makefile /etc/wifi-radar test -d /usr/sbin || install -d -m 755 /usr/sbin install -m 755 wifi-radar.localized /usr/sbin/3dsp-wifi-radar test -d /usr/share/doc/3dsp-wifi-radar || install -d -m 755 /usr/share/doc/3dsp-wifi-radar install -m 644 doc/3dsp-wifi-radar.html /usr/share/doc/3dsp-wifi-radar test -d /usr/share/doc/3dsp-wifi-radar/3dsp-wifi-radar.files || install -d -m 755 /usr/share/doc/3dsp-wifi-radar/3dsp-wifi-radar.files install -m 644 doc/3dsp-wifi-radar.files/image001.jpg /usr/share/doc/3dsp-wifi-radar/3dsp-wifi-radar.files install -m 644 doc/3dsp-wifi-radar.files/image002.gif /usr/share/doc/3dsp-wifi-radar/3dsp-wifi-radar.files install -m 644 doc/3dsp-wifi-radar.files/image003.gif /usr/share/doc/3dsp-wifi-radar/3dsp-wifi-radar.files install -m 644 doc/3dsp-wifi-radar.files/image004.jpg /usr/share/doc/3dsp-wifi-radar/3dsp-wifi-radar.files install -m 644 doc/3dsp-wifi-radar.files/image005.jpg /usr/share/doc/3dsp-wifi-radar/3dsp-wifi-radar.files install -m 644 doc/3dsp-wifi-radar.files/image006.jpg /usr/share/doc/3dsp-wifi-radar/3dsp-wifi-radar.files install -m 644 doc/3dsp-wifi-radar.files/image007.jpg /usr/share/doc/3dsp-wifi-radar/3dsp-wifi-radar.files install -m 644 doc/3dsp-wifi-radar.files/image008.jpg /usr/share/doc/3dsp-wifi-radar/3dsp-wifi-radar.files test -d /etc/init.d || install -d -m 755 /etc/init.d install -m 755 init_script /etc/init.d/wifi-radar test -d /usr/share/pixmaps || install -d -m 755 /usr/share/pixmaps install -m 644 pixmaps/wifi-radar.svg /usr/share/pixmaps install -m 644 pixmaps/wifi-radar.png /usr/share/pixmaps install -m 644 pixmaps/wifi_radar_32x32.png /usr/share/pixmaps install -m 644 pixmaps/connected1.png /usr/share/pixmaps install -m 644 pixmaps/connected2.png /usr/share/pixmaps install -m 644 pixmaps/connected3.png /usr/share/pixmaps install -m 644 pixmaps/connected4.png /usr/share/pixmaps test -d /usr/share/applications || install -d -m 755 /usr/share/applications install -m 644 wifi-radar.desktop /usr/share/applications Install_3DSPUSB.sh: line 13: $LOGFILE: ambiguous redirect [ Ok ] Install_3DSPUSB.sh: line 13: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 13: $LOGFILE: ambiguous redirect * Installing Blueman-manager...Install_3DSPUSB.sh: line 13: $LOGFILE: ambiguous redirect OK Install_3DSPUSB.sh: line 20: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 21: $LOGFILE: ambiguous redirect Ανάγνωση Λιστών Πακέτων... Ολοκληρώθηκε Κατασκευή Δένδρου Εξαρτήσεων Ανάγνωση περιγραφής της τρέχουσας κατάσταση... Ολοκληρώθηκε Τα ακόλουθα πακέτα εγκαταστάθηκαν αυτόματα και δεν χρειάζονται πλέον: localechooser-data Χρησιμοποιήστε 'apt-get autoremove' για να τα διαγράψετε. Τα ακόλουθα πακέτα θα ΑΦΑΙΡΕΘΟΥΝ: bluez-gnome Τα ακόλουθα ΝΕΑ πακέτα θα εγκατασταθούν: blueman 0 αναβαθμίστηκαν, 1 νέο εγκατεστημένα, 1 θα αφαιρεθούν και 14 δεν αναβαθμίζονται. Χρειάζεται να μεταφορτωθούν 0B/385kB από αρχεία. Μετά από αυτή τη λειτουργία, θα χρησιμοποιηθούν 975kB χώρου από το δίσκο. dpkg: bluez-gnome: προβλήματα εξάρτησης, αλλά γίνεται αφαίρεση όπως ζητήσατε: libmbca0 εξαρτάται από bluez-gnome. (Ανάγνωση βάσης δεδομένων ... προς το παρόν εγκαταστάθηκαν 165424 αρχεία και κατάλογοι.) Αφαίρεση του bluez-gnome ... Επεξεργασία των trigger για shared-mime-info ... Unknown media type in type 'all/all' Unknown media type in type 'all/allfiles' Unknown media type in type 'uri/mms' Unknown media type in type 'uri/mmst' Unknown media type in type 'uri/mmsu' Unknown media type in type 'uri/pnm' Unknown media type in type 'uri/rtspt' Unknown media type in type 'uri/rtspu' Unknown media type in type 'fonts/package' Unknown media type in type 'interface/x-winamp-skin' Επεξεργασία των trigger για man-db ... Επιλογή προηγούμενου απεπιλεγμένου πακέτου blueman. (Ανάγνωση βάσης δεδομένων ... προς το παρόν εγκαταστάθηκαν 165398 αρχεία και κατάλογοι.) Γίνεται αποσυμπίεση blueman (από .../blueman_1.10-1~ppa3j_i386.deb) ... Επεξεργασία των trigger για man-db ... Επεξεργασία των trigger για hal ... Regenerating hal fdi cache ... * Restarting Hardware abstraction layer hald [ OK ] Γίνεται εγκατάσταση blueman (1.10-1~ppa3j) ... * Reloading system message bus config... [ OK ] [ Ok ] Install_3DSPUSB.sh: line 13: $LOGFILE: ambiguous redirect * Creating file /etc/init.d/tdspusbdriver...Install_3DSPUSB.sh: line 13: $LOGFILE: ambiguous redirect [ Ok ] Install_3DSPUSB.sh: line 20: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 21: $LOGFILE: ambiguous redirect open error: No such file or directory please make sure the 3DSP_card(usb) is inserted! Install_3DSPUSB.sh: line 17: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 20: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 21: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 17: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 20: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 21: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 17: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 20: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 21: $LOGFILE: ambiguous redirect Install_3DSPUSB.sh: line 17: $LOGFILE: ambiguous redirect Installation completed. Exit. Startup 3DSP card through Applications->Accessories->3DSP uWB. Thanks for using 3DSP card. Have a good day! μετά στον κατάλογο Accessories υπήρχε μόνο το 3DSP WiFi Radar και όχι το 3DSP uWB. Έτρεξα το 3DSP WiFi Radar αλλά η απάντηση ήταν No valid wireless device! Τι να κάνω; Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
suser Δημοσ. 22 Αυγούστου 2009 Μέλος Share Δημοσ. 22 Αυγούστου 2009 Καμία ιδέα? Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
Στελλίνα Δημοσ. 24 Αυγούστου 2009 Share Δημοσ. 24 Αυγούστου 2009 Καμία ιδέα? Ανοιξε μια κονσόλα και τρέξε: /usr/sbin/ifconfig -a Το twifiu0 το βλέπεις? Αν όχι, για δες και κάνε μου paste τι modules εχει φορτώσει lsmod | grep -i 3dsp Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
suser Δημοσ. 27 Αυγούστου 2009 Μέλος Share Δημοσ. 27 Αυγούστου 2009 Δεν το βλέπει το ifconfig -a : eth0 Link encap:Ethernet HWaddr 00:e0:4c:00:02:e4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 TX bytes:0 (0.0 Interrupt:254 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:48 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2880 (2.8 KB) TX bytes:2880 (2.8 KB) lsmod | grep -i 3dsp : 3dspusbwlan 1348236 0 3dspusbbt 886580 0 3dspusbbus 13832 2 3dspusbwlan,3dspusbbt Τι να κάνω; Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
Στελλίνα Δημοσ. 28 Αυγούστου 2009 Share Δημοσ. 28 Αυγούστου 2009 Στείλε το output του dmesg Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
suser Δημοσ. 28 Αυγούστου 2009 Μέλος Share Δημοσ. 28 Αυγούστου 2009 >[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable) [ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f680000 (usable) [ 0.000000] modified: 000000003f680000 - 000000003f700000 (ACPI NVS) [ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378ba000 - 37fef5b6 [ 0.000000] Allocated new RAMDISK: 0087d000 - 00fb25b6 [ 0.000000] Move RAMDISK from 00000000378ba000 - 0000000037fef5b5 to 0087d000 - 00fb25b5 [ 0.000000] ACPI: RSDP 000F70C0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 3F68A276, 007C (r1 �yA��� �������� 6040000 LTP 0) [ 0.000000] ACPI: FACP 3F690DA0, 00F4 (r3 INTEL CALISTGA 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 3F68BA9A, 5292 (r2 INTEL CALISTGA 6040000 INTL 20050624) [ 0.000000] ACPI: FACS 3F691FC0, 0040 [ 0.000000] ACPI: APIC 3F690E94, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 3F690EFC, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 3F690F34, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A) [ 0.000000] ACPI: APIC 3F690F70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 3F690FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 3F68B44B, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 3F68ADAF, 069C (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 3F68A890, 021F (r2 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 3F68A82A, 0066 (r2 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 3F68A2F2, 0538 (r2 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email][email protected][/email] [ 0.000000] ACPI: DMI BIOS year==0, assuming ACPI-capable machine [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 130MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac] [ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000087d000 - 0000fb25b6] NEW RAMDISK ==> [000087d000 - 0000fb25b6] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f70f0] 000f70f0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0003f680 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f680 [ 0.000000] On node 0 totalpages: 259599 [ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 262 pages used for memmap [ 0.000000] HighMem zone: 33148 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257569 [ 0.000000] Kernel command line: root=UUID=9c4059c9-6cc2-4c72-bd1a-79f288d3849f ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1595.860 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 5193920 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 1008824k/1038848k available (4115k kernel code, 29184k reserved, 2199k data, 532k init, 133640k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB) [ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB) [ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.72 BogoMIPS (lpj=6383440) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.019761] ACPI: Core revision 20080926 [ 0.022073] ACPI: Checking initramfs for custom DSDT [ 0.496623] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.537764] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.540002] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3191.93 BogoMIPS (lpj=6383876) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.624294] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.624334] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.628069] Brought up 2 CPUs [ 0.628075] Total of 2 processors activated (6383.65 BogoMIPS). [ 0.628150] CPU0 attaching sched-domain: [ 0.628155] domain 0: span 0-1 level SIBLING [ 0.628160] groups: 0 1 [ 0.628171] CPU1 attaching sched-domain: [ 0.628175] domain 0: span 0-1 level SIBLING [ 0.628179] groups: 1 0 [ 0.628313] net_namespace: 776 bytes [ 0.628313] Booting paravirtualized kernel on bare hardware [ 0.628702] Time: 13:12:10 Date: 08/28/09 [ 0.628702] regulator: core version 0.5 [ 0.628702] NET: Registered protocol family 16 [ 0.628702] EISA bus registered [ 0.628702] ACPI: bus type pci registered [ 0.628702] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.628702] PCI: MCFG area at e0000000 reserved in E820 [ 0.628702] PCI: Using MMCONFIG for extended config space [ 0.628702] PCI: Using configuration type 1 for base access [ 0.633353] ACPI: EC: Look up EC in DSDT [ 0.638162] ACPI: BIOS _OSI(Linux) query ignored [ 0.639438] ACPI: Interpreter enabled [ 0.639448] ACPI: (supports S0 S3 S4 S5) [ 0.639485] ACPI: Using IOAPIC for interrupt routing [ 0.640301] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.640462] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.653414] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.653420] ACPI: EC: driver started in interrupt mode [ 0.653745] ACPI: No dock devices found. [ 0.653769] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.653900] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff] [ 0.653909] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] [ 0.653917] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff] [ 0.653925] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff] [ 0.653967] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff] [ 0.654101] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0540000-0xd0543fff] [ 0.654152] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.654160] pci 0000:00:1b.0: PME# disabled [ 0.654240] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.654248] pci 0000:00:1c.0: PME# disabled [ 0.654330] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] [ 0.654406] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] [ 0.654481] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] [ 0.654557] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f] [ 0.654636] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff] [ 0.654694] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.654702] pci 0000:00:1d.7: PME# disabled [ 0.654873] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.654880] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.654924] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.654936] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.654947] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.654959] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.654971] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.655036] pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7] [ 0.655047] pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7] [ 0.655059] pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf] [ 0.655070] pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3] [ 0.655081] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf] [ 0.655093] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0544400-0xd05447ff] [ 0.655118] pci 0000:00:1f.2: PME# supported from D3hot [ 0.655125] pci 0000:00:1f.2: PME# disabled [ 0.655192] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff] [ 0.655298] pci 0000:02:00.0: reg 10 io port: [0x2000-0x20ff] [ 0.655329] pci 0000:02:00.0: reg 18 64bit mmio: [0xd0100000-0xd0100fff] [ 0.655353] pci 0000:02:00.0: reg 20 64bit mmio: [0xd0000000-0xd000ffff] [ 0.655367] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.655386] pci 0000:02:00.0: supports D1 D2 [ 0.655390] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.655399] pci 0000:02:00.0: PME# disabled [ 0.655489] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.655498] pci 0000:00:1c.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] [ 0.655510] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xd00fffff] [ 0.655581] pci 0000:00:1e.0: transparent bridge [ 0.655615] bus 00 -> node 0 [ 0.655628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.656320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.656633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.670014] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.670238] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15) [ 0.670461] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 0.670680] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.670898] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.671119] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.671339] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.671558] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.672070] ACPI: WMI: Mapper loaded [ 0.672256] SCSI subsystem initialized [ 0.672293] libata version 3.00 loaded. [ 0.672293] usbcore: registered new interface driver usbfs [ 0.672293] usbcore: registered new interface driver hub [ 0.672293] usbcore: registered new device driver usb [ 0.672293] PCI: Using ACPI for IRQ routing [ 0.680055] Bluetooth: Core ver 2.13 [ 0.686284] NET: Registered protocol family 31 [ 0.686284] Bluetooth: HCI device and connection manager initialized [ 0.686284] Bluetooth: HCI socket layer initialized [ 0.686284] NET: Registered protocol family 8 [ 0.686284] NET: Registered protocol family 20 [ 0.686284] NetLabel: Initializing [ 0.686284] NetLabel: domain hash size = 128 [ 0.686284] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.686284] NetLabel: unlabeled traffic allowed by default [ 0.686284] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.686284] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.688136] AppArmor: AppArmor Filesystem Enabled [ 0.692021] Switched to high resolution mode on CPU 0 [ 0.692402] Switched to high resolution mode on CPU 1 [ 0.692423] pnp: PnP ACPI init [ 0.692446] ACPI: bus type pnp registered [ 0.698735] pnp: PnP ACPI: found 11 devices [ 0.698740] ACPI: ACPI bus type pnp unregistered [ 0.698747] PnPBIOS: Disabled by ACPI PNP [ 0.698767] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.698774] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.698780] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.698786] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.698792] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.698798] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.698804] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.698810] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.698825] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.698838] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.698844] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.698850] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.698856] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.698862] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.698873] system 00:07: ioport range 0x6a0-0x6af has been reserved [ 0.698879] system 00:07: ioport range 0x6b0-0x6ff has been reserved [ 0.733802] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.733810] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.733821] pci 0000:00:1c.0: MEM window: 0xd0100000-0xd01fffff [ 0.733829] pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000d00fffff [ 0.733842] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.733846] pci 0000:00:1e.0: IO window: disabled [ 0.733854] pci 0000:00:1e.0: MEM window: disabled [ 0.733862] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.733891] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.733902] pci 0000:00:1c.0: setting latency timer to 64 [ 0.733915] pci 0000:00:1e.0: setting latency timer to 64 [ 0.733923] bus: 00 index 0 io port: [0x00-0xffff] [ 0.733927] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.733932] bus: 02 index 0 io port: [0x2000-0x2fff] [ 0.733937] bus: 02 index 1 mmio: [0xd0100000-0xd01fffff] [ 0.733942] bus: 02 index 2 mmio: [0xd0000000-0xd00fffff] [ 0.733946] bus: 02 index 3 mmio: [0x0-0x0] [ 0.733951] bus: 03 index 0 mmio: [0x0-0x0] [ 0.733955] bus: 03 index 1 mmio: [0x0-0x0] [ 0.733959] bus: 03 index 2 mmio: [0x0-0x0] [ 0.733963] bus: 03 index 3 io port: [0x00-0xffff] [ 0.733967] bus: 03 index 4 mmio: [0x000000-0xffffffff] [ 0.733988] NET: Registered protocol family 2 [ 0.745129] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.745657] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.746542] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.747045] TCP: Hash tables configured (established 131072 bind 65536) [ 0.747051] TCP reno registered [ 0.749198] NET: Registered protocol family 1 [ 0.749421] checking if image is initramfs... it is [ 1.724807] Freeing initrd memory: 7381k freed [ 1.724879] Simple Boot Flag at 0x36 set to 0x1 [ 1.725264] cpufreq: No nForce2 chipset. [ 1.725509] audit: initializing netlink socket (disabled) [ 1.725543] type=2000 audit(1251465130.724:1): initialized [ 1.739994] highmem bounce pool size: 64 pages [ 1.740007] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.743172] VFS: Disk quotas dquot_6.5.1 [ 1.743294] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.744597] fuse init (API version 7.10) [ 1.744775] msgmni has been set to 1724 [ 1.745139] alg: No test for stdrng (krng) [ 1.745170] io scheduler noop registered [ 1.745175] io scheduler anticipatory registered [ 1.745179] io scheduler deadline registered [ 1.745218] io scheduler cfq registered (default) [ 1.745241] pci 0000:00:02.0: Boot video device [ 1.753437] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.753500] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.753547] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X [ 1.753568] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.753603] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.753630] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.753750] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.753930] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.757477] ACPI: AC Adapter [AC0] (on-line) [ 2.284025] ACPI: EC: missing confirmations, switch off interrupt mode. [ 2.564678] ACPI: Battery Slot [bAT0] (battery present) [ 2.564837] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.564844] ACPI: Power Button (FF) [PWRF] [ 2.564946] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 2.568068] ACPI: Lid Switch [LID0] [ 2.568168] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 2.568181] ACPI: Power Button (CM) [PWRB] [ 2.568270] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 2.568284] ACPI: Sleep Button (CM) [sLPB] [ 2.569228] ACPI: BIOS _OSI(Linux) query ignored [ 2.569542] ACPI: SSDT 3F68AAAF, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 2.569948] ACPI: BIOS _OSI(Linux) query ignored [ 2.573768] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.573840] processor ACPI_CPU:00: registered as cooling_device0 [ 2.573853] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.574613] ACPI: BIOS _OSI(Linux) query ignored [ 2.574979] ACPI: SSDT 3F68ACE7, 00C8 (r2 PmRef Cpu1Ist 3000 INTL 20050624) [ 2.575527] ACPI: BIOS _OSI(Linux) query ignored [ 2.585792] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 2.585837] processor ACPI_CPU:01: registered as cooling_device1 [ 2.585846] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.593598] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.597920] ACPI: Thermal Zone [THZN] (43 C) [ 2.598020] isapnp: Scanning for PnP cards... [ 2.951763] isapnp: No Plug & Play device found [ 2.981526] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.983392] brd: module loaded [ 2.984072] loop: module loaded [ 2.984222] Fixed MDIO Bus: probed [ 2.984235] PPP generic driver version 2.4.2 [ 2.984367] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 2.984429] Driver 'sd' needs updating - please use bus_type methods [ 2.984450] Driver 'sr' needs updating - please use bus_type methods [ 2.984587] ata_piix 0000:00:1f.1: version 2.12 [ 2.984616] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.984679] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.984846] scsi0 : ata_piix [ 2.992027] scsi1 : ata_piix [ 2.993298] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 2.993307] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 3.160030] ata2: port disabled. ignoring. [ 3.160083] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.160092] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 3.316037] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 3.316174] scsi2 : ata_piix [ 3.316313] scsi3 : ata_piix [ 3.318148] ata3: SATA max UDMA/133 cmd 0x18d0 ctl 0x18c4 bmdma 0x18b0 irq 19 [ 3.318155] ata4: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b8 irq 19 [ 3.520309] ata3.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133 [ 3.520315] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.536850] ata3.00: configured for UDMA/133 [ 3.703453] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5 [ 3.703671] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 3.703715] sd 2:0:0:0: [sda] Write Protect is off [ 3.703720] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.703791] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.703935] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 3.703975] sd 2:0:0:0: [sda] Write Protect is off [ 3.703981] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.704062] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.704072] sda: sda1 sda2 < sda5 sda6 > [ 3.746191] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.746296] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.747578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.747628] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.747678] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.747685] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.747797] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.751716] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.751727] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.751754] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000 [ 3.764021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.764162] usb usb1: configuration #1 chosen from 1 choice [ 3.764224] hub 1-0:1.0: USB hub found [ 3.764239] hub 1-0:1.0: 8 ports detected [ 3.764451] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.764490] uhci_hcd: USB Universal Host Controller Interface driver [ 3.764558] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.764572] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.764578] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.764680] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.764716] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 3.764870] usb usb2: configuration #1 chosen from 1 choice [ 3.764923] hub 2-0:1.0: USB hub found [ 3.764941] hub 2-0:1.0: 2 ports detected [ 3.765105] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.765117] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.765123] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.765207] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.765242] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 3.765391] usb usb3: configuration #1 chosen from 1 choice [ 3.765443] hub 3-0:1.0: USB hub found [ 3.765458] hub 3-0:1.0: 2 ports detected [ 3.765643] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.765654] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.765660] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.765745] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.765791] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 3.765944] usb usb4: configuration #1 chosen from 1 choice [ 3.765997] hub 4-0:1.0: USB hub found [ 3.766014] hub 4-0:1.0: 2 ports detected [ 3.766177] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 3.766190] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.766196] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.766286] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.766331] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 [ 3.766478] usb usb5: configuration #1 chosen from 1 choice [ 3.766532] hub 5-0:1.0: USB hub found [ 3.766546] hub 5-0:1.0: 2 ports detected [ 3.766803] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.783998] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.784019] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.788095] mice: PS/2 mouse device common for all mice [ 3.808134] rtc_cmos 00:08: RTC can wake from S4 [ 3.808204] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 3.808248] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.808399] device-mapper: uevent: version 1.0.3 [ 3.808610] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email][email protected][/email] [ 3.808773] device-mapper: multipath: version 1.0.5 loaded [ 3.808781] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.808973] EISA: Probing bus 0 at eisa.0 [ 3.808985] Cannot allocate resource for EISA slot 1 [ 3.808991] Cannot allocate resource for EISA slot 2 [ 3.809029] EISA: Detected 0 cards. [ 3.809209] cpuidle: using governor ladder [ 3.809334] cpuidle: using governor menu [ 3.810449] TCP cubic registered [ 3.810675] NET: Registered protocol family 10 [ 3.811536] lo: Disabled Privacy Extensions [ 3.812229] NET: Registered protocol family 17 [ 3.812271] Bluetooth: L2CAP ver 2.11 [ 3.812274] Bluetooth: L2CAP socket layer initialized [ 3.812280] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.812284] Bluetooth: SCO socket layer initialized [ 3.812363] Bluetooth: RFCOMM socket layer initialized [ 3.812380] Bluetooth: RFCOMM TTY layer initialized [ 3.812386] Bluetooth: RFCOMM ver 1.10 [ 3.813453] Using IPI No-Shortcut mode [ 3.813641] registered taskstats version 1 [ 3.813863] Magic number: 5:662:231 [ 3.813982] rtc_cmos 00:08: setting system clock to 2009-08-28 13:12:13 UTC (1251465133) [ 3.813990] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.813994] EDD information not available. [ 3.814427] Freeing unused kernel memory: 532k freed [ 3.814715] Write protecting the kernel text: 4116k [ 3.814816] Write protecting the kernel read-only data: 1528k [ 3.819456] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 4.077040] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 4.217185] usb 1-3: configuration #1 chosen from 1 choice [ 4.276516] Initializing USB Mass Storage driver... [ 4.284146] scsi4 : SCSI emulation for USB Mass Storage devices [ 4.305371] usbcore: registered new interface driver usb-storage [ 4.305383] USB Mass Storage support registered. [ 4.307395] usb-storage: device found at 2 [ 4.307403] usb-storage: waiting for device to settle before scanning [ 4.332124] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 4.433138] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.433177] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.433207] r8169 0000:02:00.0: setting latency timer to 64 [ 4.433383] r8169 0000:02:00.0: irq 2302 for MSI/MSI-X [ 4.435148] eth0: RTL8102e at 0xf7c78000, 00:e0:4c:00:02:e4, XID 34a00000 IRQ 2302 [ 4.593219] usb 1-5: configuration #1 chosen from 1 choice [ 4.708169] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 4.845177] usb 1-6: configuration #1 chosen from 1 choice [ 5.222362] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.222369] EXT3-fs: write access will be enabled during recovery. [ 5.525914] kjournald starting. Commit interval 5 seconds [ 5.525942] EXT3-fs: recovery complete. [ 5.526512] EXT3-fs: mounted filesystem with ordered data mode. [ 9.304277] usb-storage: device scan complete [ 9.304853] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS [ 9.306077] sd 4:0:0:0: [sdb] 15695871 512-byte hardware sectors: (8.03 GB/7.48 GiB) [ 9.306573] sd 4:0:0:0: [sdb] Write Protect is off [ 9.306579] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 [ 9.306584] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 9.307858] sd 4:0:0:0: [sdb] 15695871 512-byte hardware sectors: (8.03 GB/7.48 GiB) [ 9.308547] sd 4:0:0:0: [sdb] Write Protect is off [ 9.308554] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 [ 9.308559] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 9.308568] sdb: sdb1 [ 9.309691] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 9.309806] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 11.759918] udev: starting version 141 [ 12.094036] acpi device:06: registered as cooling_device2 [ 12.094397] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input6 [ 12.120323] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 12.551606] Linux video capture interface: v2.00 [ 12.836165] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 12.943802] intel_rng: FWH not detected [ 12.963080] Linux agpgart interface v0.103 [ 13.015889] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 13.017557] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input8 [ 13.020285] usbcore: registered new interface driver uvcvideo [ 13.020297] USB Video Class driver (v0.1.0) [ 13.110344] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 13.110694] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 13.114003] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 13.116222] iTCO_vendor_support: vendor-support=0 [ 13.136644] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 13.137063] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) [ 13.137298] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.193226] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 13.395931] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 13.396105] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.429940] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... [ 13.694843] psmouse serio1: ID: 10 00 64<6>lp: driver loaded but no devices found [ 13.837998] elantech.c: assuming hardware version 1, firmware version 2.6 [ 13.893576] elantech.c: Synaptics capabilities query result 0x10, 0x02, 0x64. [ 14.195413] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9 [ 14.501898] EXT3 FS on sda6, internal journal [ 15.897900] type=1505 audit(1251454345.582:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2025 [ 16.009590] type=1505 audit(1251454345.694:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2029 [ 16.009869] type=1505 audit(1251454345.694:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2029 [ 16.009988] type=1505 audit(1251454345.694:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2029 [ 16.010088] type=1505 audit(1251454345.694:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2029 [ 16.326014] type=1505 audit(1251454346.010:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2034 [ 16.326428] type=1505 audit(1251454346.010:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2034 [ 16.382876] type=1505 audit(1251454346.066:9): operation="profile_load" name="/usr/sbin/mysqld-akonadi" name2="default" pid=2038 [ 16.444315] type=1505 audit(1251454346.130:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2042 [ 20.769724] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.769732] Bluetooth: BNEP filters: protocol multicast [ 20.802822] Bridge firewalling registered [ 22.145457] ppdev: user-space parallel port driver [ 23.867592] [drm] Initialized drm 1.1.0 20060810 [ 23.881585] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 23.881599] pci 0000:00:02.0: setting latency timer to 64 [ 23.882573] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 23.884959] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 23.885035] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 24.349467] hci_usb_probe: sizeof(BT_DEVICE_EXT) 6055 sizeof(SCO_CONNECT_DEVICE_T) 0x4e 0x4a [ 24.349493] BLUETOOTH: Bus_new_interface: enter, dev = f6342000, intf = f60e7f00; [ 24.349577] usbcore: registered new interface driver 3DSP_BT_USB [ 25.170505] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 25.523849] [ 25.523857] [ 25.523861] /*****************************************************************************\ [ 25.523867] | | [ 25.523874] | 3DSP USB WLAN Driver | [ 25.523880] | | [ 25.523886] | Version : WLU090715 RX - FIFO | [ 25.523892] | TX - FIFO | [ 25.523898] | | [ 25.523905] | Compiled at 10:05:07 [ Jul 17 2009 ] | [ 25.523911] | | [ 25.523918] | | [ 25.523924] \*****************************************************************************/ [ 25.523930] [ 25.523932] [ 25.523995] -1251454355.210021(12:35) [ 25.523998] -1251454355.214369(12:35) [ 25.528350] <6>usbcore: registered new interface driver 3DSP_WLAN_USB [ 26.316182] r8169: eth0: link down [ 26.316720] ADDRCONF(NETDEV_UP): eth0: link is not ready Καμία ιδέα; ---------- Το μήνυμα προστέθηκε στις 20:51 ---------- Τίποτα Στελλίνα; Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
suser Δημοσ. 30 Αυγούστου 2009 Μέλος Share Δημοσ. 30 Αυγούστου 2009 Μπορεί κανείς να βοηθήσει; Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
suser Δημοσ. 1 Σεπτεμβρίου 2009 Μέλος Share Δημοσ. 1 Σεπτεμβρίου 2009 Παιδιά μάλλον δεν είναι αυτός ο driver αλλά εάν επιμένετε πως είναι αυτός τότε ας μου εξηγήσει κάποιος τι πάει στραβά. Συνδέστε για να σχολιάσετε Κοινοποίηση σε άλλες σελίδες άλλες επιλογές
Προτεινόμενες αναρτήσεις
Αρχειοθετημένο
Αυτό το θέμα έχει αρχειοθετηθεί και είναι κλειστό για περαιτέρω απαντήσεις.