k3b - brasero

teliparas · 29 Απριλίου 2009

λοιπον μετα απο πολυ καιρο εμφανιστηκε κατι κουλο σε debian sid

οτι dvd και και να γραψω με k3b - brasero δε μπορω να δω τα περιεχομενα του

να πω ακομα οτι τα iso τα καιει κανονικα

ομοιος και τα data dvd αλλα σε αυτα δεν μπορω να δω τα περιεχομενα

σε αλλουσ υπολογιστεσ βλεπω ta data κανονικοτατα

θεμα στα περμισιον δε νομιζω να υφισταται

αλλα τι??????????????

nske · 29 Απριλίου 2009

Mount γίνεται κανονικά;

Αν ναι, η ls τι εμφανίζει; Έναν κενό κατάλογο;

Η df τι sizes αναφέρει;

Η mount τι filesystem αναφέρει (udf ή iso9660);

teliparas · 29 Απριλίου 2009

Mount γίνεται κανονικά;
Αν ναι, η ls τι εμφανίζει; Έναν κενό κατάλογο;

Η df τι sizes αναφέρει;

Η mount τι filesystem αναφέρει (udf ή iso9660);

2 εικονεσ χιλιες λεξεις

ειδικα η δευτερη (τωρα προσεξα οτι δεν μπορει να κανει mount:o)

χρειαζομαι ομως ακομα βοηθεια για να το κανω να δουλεψει

nske · 29 Απριλίου 2009

Δοκίμασε ως root να το κάνεις κάπου mount και δες τι επιστρέφει η εντολή mount και τι γράφεται στο kernel log:

π.χ.

># mount /dev/cdrom /mnt/cdrom
# dmesg

Αν γίνεται ως root, κάνε το umount και δοκίμασε και ως user.

teliparas · 29 Απριλίου 2009

pantelis@debian:~$ su

Password:

debian:/home/pantelis# mount /dev/cdrom /mnt/cdrom

mount: mount point /mnt/cdrom does not exist

debian:/home/pantelis#

debian:/home/pantelis# dmesg

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 2.6.29-1-amd64 (Debian 2.6.29-3) ([email protected]) (gcc version 4.3.3 (Debian 4.3.3-5) ) #1 SMP Fri Apr 17 10:12:36 UTC 2009

[ 0.000000] Command line: root=/dev/sda1 ro

[ 0.000000] KERNEL supported cpus:

[ 0.000000] Intel GenuineIntel

[ 0.000000] AMD AuthenticAMD

[ 0.000000] Centaur CentaurHauls

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)

[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000007e625000 (usable)

[ 0.000000] BIOS-e820: 000000007e625000 - 000000007e628000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000007e628000 - 000000007fca8000 (usable)

[ 0.000000] BIOS-e820: 000000007fca8000 - 000000007fcbf000 (reserved)

[ 0.000000] BIOS-e820: 000000007fcbf000 - 000000007fd86000 (usable)

[ 0.000000] BIOS-e820: 000000007fd86000 - 000000007fdbf000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000007fdbf000 - 000000007fdea000 (usable)

[ 0.000000] BIOS-e820: 000000007fdea000 - 000000007fdff000 (ACPI data)

[ 0.000000] BIOS-e820: 000000007fdff000 - 000000007fe00000 (usable)

[ 0.000000] BIOS-e820: 000000007fe00000 - 0000000080000000 (reserved)

[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)

[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)

[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)

[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)

[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)

[ 0.000000] DMI 2.4 present.

[ 0.000000] last_pfn = 0x7fe00 max_arch_pfn = 0x100000000

[ 0.000000] init_memory_mapping: 0000000000000000-000000007fe00000

[ 0.000000] 0000000000 - 007fe00000 page 2M

[ 0.000000] kernel direct mapping tables up to 7fe00000 @ 8000-b000

[ 0.000000] last_map_addr: 7fe00000 end: 7fe00000

[ 0.000000] RAMDISK: 37c9b000 - 37fef1bd

[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 HPQOEM)

[ 0.000000] ACPI: XSDT 7FDFE120, 0064 (r1 HPQOEM SLIC-MPC 1 1000013)

[ 0.000000] ACPI: FACP 7FDFD000, 00F4 (r4 HPQOEM SLIC-MPC 1 MSFT 1000013)

[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)

[ 0.000000] ACPI: DSDT 7FDED000, B53B (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)

[ 0.000000] ACPI: FACS 7FD92000, 0040

[ 0.000000] ACPI: HPET 7FDFC000, 0038 (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)

[ 0.000000] ACPI: APIC 7FDFB000, 006C (r2 HPQOEM SLIC-MPC 1 MSFT 1000013)

[ 0.000000] ACPI: MCFG 7FDFA000, 003C (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)

[ 0.000000] ACPI: ASF! 7FDF9000, 00A5 (r32 HPQOEM SLIC-MPC 1 MSFT 1000013)

[ 0.000000] ACPI: SLIC 7FDEC000, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)

[ 0.000000] ACPI: BOOT 7FDEB000, 0028 (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)

[ 0.000000] ACPI: SSDT 7FDEA000, 0655 (r1 PmRef CpuPm 3000 INTL 20051117)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] No NUMA configuration found

[ 0.000000] Faking a node at 0000000000000000-000000007fe00000

[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fe00000

[ 0.000000] NODE_DATA [0000000000009000 - 0000000000010fff]

[ 0.000000] bootmap [0000000000011000 - 0000000000020fbf] pages 10

[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007fe00000]

[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]

[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]

[ 0.000000] #2 [0000200000 - 00007f374c] TEXT DATA BSS ==> [0000200000 - 00007f374c]

[ 0.000000] #3 [0037c9b000 - 0037fef1bd] RAMDISK ==> [0037c9b000 - 0037fef1bd]

[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]

[ 0.000000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]

[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0x00000000 -> 0x00001000

[ 0.000000] DMA32 0x00001000 -> 0x00100000

[ 0.000000] Normal 0x00100000 -> 0x00100000

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[6] active PFN ranges

[ 0.000000] 0: 0x00000000 -> 0x0000009e

[ 0.000000] 0: 0x00000100 -> 0x0007e625

[ 0.000000] 0: 0x0007e628 -> 0x0007fca8

[ 0.000000] 0: 0x0007fcbf -> 0x0007fd86

[ 0.000000] 0: 0x0007fdbf -> 0x0007fdea

[ 0.000000] 0: 0x0007fdff -> 0x0007fe00

[ 0.000000] On node 0 totalpages: 523574

[ 0.000000] DMA zone: 56 pages used for memmap

[ 0.000000] DMA zone: 1625 pages reserved

[ 0.000000] DMA zone: 2317 pages, LIFO batch:0

[ 0.000000] DMA32 zone: 7105 pages used for memmap

[ 0.000000] DMA32 zone: 512471 pages, LIFO batch:31

[ 0.000000] ACPI: PM-Timer IO Port: 0x408

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)

[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 24

[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000

[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000

[ 0.000000] PM: Registered nosave memory: 000000007e625000 - 000000007e628000

[ 0.000000] PM: Registered nosave memory: 000000007fca8000 - 000000007fcbf000

[ 0.000000] PM: Registered nosave memory: 000000007fd86000 - 000000007fdbf000

[ 0.000000] PM: Registered nosave memory: 000000007fdea000 - 000000007fdff000

[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)

[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1

[ 0.000000] PERCPU: Allocating 53248 bytes of per cpu data

[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514788

[ 0.000000] Policy zone: DMA32

[ 0.000000] Kernel command line: root=/dev/sda1 ro

[ 0.000000] Initializing CPU#0

[ 0.000000] Experimental hierarchical RCU implementation.

[ 0.000000] Experimental hierarchical RCU init done.

[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)

[ 0.000000] Fast TSC calibration using PIT

[ 0.000000] Detected 1995.255 MHz processor.

[ 0.004000] Console: colour VGA+ 80x25

[ 0.004000] console [tty0] enabled

[ 0.004000] Checking aperture...

[ 0.004000] No AGP bridge found

[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area

[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[ 0.004000] Memory: 2055724k/2095104k available (2550k kernel code, 808k absent, 38572k reserved, 1337k data, 552k init)

[ 0.004000] hpet clockevent registered

[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer

[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.51 BogoMIPS (lpj=7981020)

[ 0.004000] Security Framework initialized

[ 0.004000] SELinux: Disabled at boot.

[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)

[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.004000] Mount-cache hash table entries: 256

[ 0.004000] Initializing cgroup subsys ns

[ 0.004000] Initializing cgroup subsys cpuacct

[ 0.004000] Initializing cgroup subsys devices

[ 0.004013] Initializing cgroup subsys freezer

[ 0.004191] Initializing cgroup subsys net_cls

[ 0.004395] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 0.004733] CPU: L2 cache: 3072K

[ 0.004910] [ds] using Core 2/Atom configuration

[ 0.005087] CPU 0/0x0 -> Node 0

[ 0.005263] CPU: Physical Processor ID: 0

[ 0.005439] CPU: Processor Core ID: 0

[ 0.005621] CPU0: Thermal monitoring enabled (TM1)

[ 0.005799] using mwait in idle threads.

[ 0.008245] ACPI: Core revision 20081204

[ 0.028053] Setting APIC routing to flat

[ 0.028549] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.071607] CPU0: Intel® Core2 Duo CPU P7350 @ 2.00GHz stepping 06

[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000

[ 0.004000] Initializing CPU#1

[ 0.004000] Calibrating delay using timer specific routine.. 3990.40 BogoMIPS (lpj=7980819)

[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 0.004000] CPU: L2 cache: 3072K

[ 0.004000] [ds] using Core 2/Atom configuration

[ 0.004000] CPU 1/0x1 -> Node 0

[ 0.004000] CPU: Physical Processor ID: 0

[ 0.004000] CPU: Processor Core ID: 1

[ 0.004000] CPU1: Thermal monitoring enabled (TM1)

[ 0.160620] CPU1: Intel® Core2 Duo CPU P7350 @ 2.00GHz stepping 06

[ 0.162735] checking TSC synchronization [CPU#0 -> CPU#1]: passed.

[ 0.164044] Brought up 2 CPUs

[ 0.164221] Total of 2 processors activated (7980.91 BogoMIPS).

[ 0.164461] CPU0 attaching sched-domain:

[ 0.164464] domain 0: span 0-1 level MC

[ 0.164465] groups: 0 1

[ 0.164470] CPU1 attaching sched-domain:

[ 0.164472] domain 0: span 0-1 level MC

[ 0.164473] groups: 1 0

[ 0.164533] net_namespace: 1888 bytes

[ 0.168031] Booting paravirtualized kernel on bare hardware

[ 0.168333] regulator: core version 0.5

[ 0.168523] NET: Registered protocol family 16

[ 0.168523] ACPI: bus type pci registered

[ 0.168523] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63

[ 0.168523] PCI: MCFG area at f8000000 reserved in E820

[ 0.172340] PCI: Using MMCONFIG at f8000000 - fbffffff

[ 0.172518] PCI: Using configuration type 1 for base access

[ 0.172709] bio: create slab <bio-0> at 0

[ 0.173098] ACPI: EC: Enabling special treatment for EC from MSI.

[ 0.173279] ACPI: EC: Look up EC in DSDT

[ 0.179726] ACPI: BIOS _OSI(Linux) query ignored

[ 0.312016] ACPI: EC: non-query interrupt received, switching to interrupt mode

[ 0.316532] ACPI: Interpreter enabled

[ 0.316532] ACPI: (supports S0 S3 S4 S5)

[ 0.317384] ACPI: Using IOAPIC for interrupt routing

[ 0.333675] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62

[ 0.333675] ACPI: EC: driver started in interrupt mode

[ 0.336106] ACPI: No dock devices found.

[ 0.336448] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 0.336659] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[ 0.336659] pci 0000:00:01.0: PME# disabled

[ 0.340084] pci 0000:00:1a.0: reg 20 io port: [0xa0e0-0xa0ff]

[ 0.340166] pci 0000:00:1a.1: reg 20 io port: [0xa0c0-0xa0df]

[ 0.340251] pci 0000:00:1a.7: reg 10 32bit mmio: [0x9f305c00-0x9f305fff]

[ 0.340314] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold

[ 0.340497] pci 0000:00:1a.7: PME# disabled

[ 0.344011] pci 0000:00:1b.0: reg 10 64bit mmio: [0x9f300000-0x9f303fff]

[ 0.344061] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 0.344243] pci 0000:00:1b.0: PME# disabled

[ 0.344485] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.344667] pci 0000:00:1c.0: PME# disabled

[ 0.344912] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[ 0.345094] pci 0000:00:1c.1: PME# disabled

[ 0.345338] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[ 0.345519] pci 0000:00:1c.2: PME# disabled

[ 0.345764] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold

[ 0.345946] pci 0000:00:1c.3: PME# disabled

[ 0.346189] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

[ 0.346371] pci 0000:00:1c.4: PME# disabled

[ 0.346616] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold

[ 0.346798] pci 0000:00:1c.5: PME# disabled

[ 0.347035] pci 0000:00:1d.0: reg 20 io port: [0xa0a0-0xa0bf]

[ 0.347116] pci 0000:00:1d.1: reg 20 io port: [0xa080-0xa09f]

[ 0.347197] pci 0000:00:1d.2: reg 20 io port: [0xa060-0xa07f]

[ 0.347278] pci 0000:00:1d.3: reg 20 io port: [0xa040-0xa05f]

[ 0.347361] pci 0000:00:1d.7: reg 10 32bit mmio: [0x9f305800-0x9f305bff]

[ 0.347425] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[ 0.347608] pci 0000:00:1d.7: PME# disabled

[ 0.347988] pci 0000:00:1f.2: reg 10 io port: [0xa108-0xa10f]

[ 0.347994] pci 0000:00:1f.2: reg 14 io port: [0xa114-0xa117]

[ 0.348005] pci 0000:00:1f.2: reg 18 io port: [0xa100-0xa107]

[ 0.348011] pci 0000:00:1f.2: reg 1c io port: [0xa110-0xa113]

[ 0.348017] pci 0000:00:1f.2: reg 20 io port: [0xa020-0xa03f]

[ 0.348024] pci 0000:00:1f.2: reg 24 32bit mmio: [0x9f305000-0x9f3057ff]

[ 0.348062] pci 0000:00:1f.2: PME# supported from D3hot

[ 0.348242] pci 0000:00:1f.2: PME# disabled

[ 0.348450] pci 0000:00:1f.3: reg 10 64bit mmio: [0x9f306000-0x9f3060ff]

[ 0.348466] pci 0000:00:1f.3: reg 20 io port: [0xa000-0xa01f]

[ 0.348525] pci 0000:00:1f.6: reg 10 64bit mmio: [0x9f304000-0x9f304fff]

[ 0.348648] pci 0000:01:00.0: reg 10 32bit mmio: [0x92000000-0x92ffffff]

[ 0.348668] pci 0000:01:00.0: reg 14 64bit mmio: [0x80000000-0x8fffffff]

[ 0.348689] pci 0000:01:00.0: reg 1c 64bit mmio: [0x90000000-0x91ffffff]

[ 0.348703] pci 0000:01:00.0: reg 24 io port: [0x9000-0x907f]

[ 0.348717] pci 0000:01:00.0: reg 30 32bit mmio: [0xfff80000-0xffffffff]

[ 0.348831] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]

[ 0.348834] pci 0000:00:01.0: bridge 32bit mmio: [0x90000000-0x92ffffff]

[ 0.348838] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x8fffffff]

[ 0.348917] pci 0000:02:00.0: reg 10 64bit mmio: [0x9e200000-0x9e201fff]

[ 0.349019] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold

[ 0.349203] pci 0000:02:00.0: PME# disabled

[ 0.349440] pci 0000:00:1c.0: bridge io port: [0x8000-0x8fff]

[ 0.349444] pci 0000:00:1c.0: bridge 32bit mmio: [0x9e200000-0x9f2fffff]

[ 0.349451] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x93000000-0x93ffffff]

[ 0.349502] pci 0000:03:00.0: reg 10 io port: [0x6000-0x60ff]

[ 0.349524] pci 0000:03:00.0: reg 18 64bit mmio: [0x94010000-0x94010fff]

[ 0.349540] pci 0000:03:00.0: reg 20 64bit mmio: [0x94000000-0x9400ffff]

[ 0.349548] pci 0000:03:00.0: reg 30 32bit mmio: [0xffff0000-0xffffffff]

[ 0.349593] pci 0000:03:00.0: supports D1 D2

[ 0.349595] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.349779] pci 0000:03:00.0: PME# disabled

[ 0.350016] pci 0000:00:1c.1: bridge io port: [0x6000-0x7fff]

[ 0.350020] pci 0000:00:1c.1: bridge 32bit mmio: [0x9d200000-0x9e1fffff]

[ 0.350026] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x94000000-0x950fffff]

[ 0.350072] pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]

[ 0.350076] pci 0000:00:1c.2: bridge 32bit mmio: [0x9c200000-0x9d1fffff]

[ 0.350082] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x95100000-0x960fffff]

[ 0.350128] pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]

[ 0.350132] pci 0000:00:1c.3: bridge 32bit mmio: [0x9b200000-0x9c1fffff]

[ 0.350138] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x96100000-0x970fffff]

[ 0.350195] pci 0000:06:00.0: reg 10 32bit mmio: [0x9a100000-0x9a1007ff]

[ 0.350206] pci 0000:06:00.0: reg 14 32bit mmio: [0x9a100d00-0x9a100d7f]

[ 0.350236] pci 0000:06:00.0: reg 20 32bit mmio: [0x9a100c80-0x9a100cff]

[ 0.350247] pci 0000:06:00.0: reg 24 32bit mmio: [0x9a100c00-0x9a100c7f]

[ 0.350361] pci 0000:06:00.1: reg 10 32bit mmio: [0x9a100b00-0x9a100bff]

[ 0.350505] pci 0000:06:00.2: reg 10 32bit mmio: [0x9a100a00-0x9a100aff]

[ 0.350648] pci 0000:06:00.3: reg 10 32bit mmio: [0x9a100900-0x9a1009ff]

[ 0.350792] pci 0000:06:00.4: reg 10 32bit mmio: [0x9a100800-0x9a1008ff]

[ 0.350937] pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff]

[ 0.350941] pci 0000:00:1c.4: bridge 32bit mmio: [0x9a100000-0x9b1fffff]

[ 0.350948] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x97100000-0x980fffff]

[ 0.350994] pci 0000:00:1c.5: bridge io port: [0x2000-0x2fff]

[ 0.350998] pci 0000:00:1c.5: bridge 32bit mmio: [0x99100000-0x9a0fffff]

[ 0.351004] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x98100000-0x990fffff]

[ 0.351058] pci 0000:00:1e.0: transparent bridge

[ 0.351289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.351622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]

[ 0.351728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]

[ 0.351903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]

[ 0.352028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]

[ 0.352153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]

[ 0.352272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]

[ 0.352390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]

[ 0.352535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]

[ 0.360167] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.362120] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.364666] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.366649] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.368526] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.370508] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)

[ 0.372508] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)

[ 0.374492] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.

[ 0.376759] usbcore: registered new interface driver usbfs

[ 0.376759] usbcore: registered new interface driver hub

[ 0.376759] usbcore: registered new device driver usb

[ 0.376759] PCI: Using ACPI for IRQ routing

[ 0.388038] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

[ 0.389032] hpet0: 4 comparators, 64-bit 14.318180 MHz counter

[ 0.404005] pnp: PnP ACPI init

[ 0.404187] ACPI: bus type pnp registered

[ 0.410031] alloc irq_desc for 23 on cpu 0 node 0

[ 0.410033] alloc kstat_irqs on cpu 0 node 0

[ 0.410522] pnp: PnP ACPI: found 12 devices

[ 0.410700] ACPI: ACPI bus type pnp unregistered

[ 0.410884] system 00:00: iomem range 0xf8000000-0xfbffffff has been reserved

[ 0.411070] system 00:02: ioport range 0x164e-0x164f has been reserved

[ 0.411251] system 00:02: ioport range 0x600-0x60f has been reserved

[ 0.411431] system 00:02: ioport range 0x610-0x610 has been reserved

[ 0.411611] system 00:02: ioport range 0x800-0x80f has been reserved

[ 0.411792] system 00:02: ioport range 0x810-0x817 has been reserved

[ 0.411973] system 00:02: ioport range 0x820-0x823 has been reserved

[ 0.412162] system 00:02: ioport range 0x400-0x47f has been reserved

[ 0.412343] system 00:02: ioport range 0x500-0x53f has been reserved

[ 0.412524] system 00:02: ioport range 0x380-0x383 has been reserved

[ 0.412706] system 00:02: iomem range 0xf8000000-0xfbffffff has been reserved

[ 0.412889] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved

[ 0.413071] system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved

[ 0.413253] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved

[ 0.413436] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved

[ 0.413618] system 00:02: iomem range 0xfec00000-0xfec00fff has been reserved

[ 0.413800] system 00:02: iomem range 0xfed20000-0xfed3ffff has been reserved

[ 0.413982] system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved

[ 0.414164] system 00:02: iomem range 0xfed45000-0xfed8ffff has been reserved

[ 0.414346] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved

[ 0.419446] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0x90000000-0x8fffffff]

[ 0.419643] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01

[ 0.419823] pci 0000:00:01.0: IO window: 0x9000-0x9fff

[ 0.420007] pci 0000:00:01.0: MEM window: 0x90000000-0x92ffffff

[ 0.420188] pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x0000008fffffff

[ 0.420385] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02

[ 0.420566] pci 0000:00:1c.0: IO window: 0x8000-0x8fff

[ 0.420749] pci 0000:00:1c.0: MEM window: 0x9e200000-0x9f2fffff

[ 0.420931] pci 0000:00:1c.0: PREFETCH window: 0x00000093000000-0x00000093ffffff

[ 0.421131] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03

[ 0.421312] pci 0000:00:1c.1: IO window: 0x6000-0x7fff

[ 0.421494] pci 0000:00:1c.1: MEM window: 0x9d200000-0x9e1fffff

[ 0.421676] pci 0000:00:1c.1: PREFETCH window: 0x00000094000000-0x000000950fffff

[ 0.421876] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04

[ 0.422057] pci 0000:00:1c.2: IO window: 0x5000-0x5fff

[ 0.422238] pci 0000:00:1c.2: MEM window: 0x9c200000-0x9d1fffff

[ 0.422421] pci 0000:00:1c.2: PREFETCH window: 0x00000095100000-0x000000960fffff

[ 0.422620] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05

[ 0.422800] pci 0000:00:1c.3: IO window: 0x4000-0x4fff

[ 0.422983] pci 0000:00:1c.3: MEM window: 0x9b200000-0x9c1fffff

[ 0.423165] pci 0000:00:1c.3: PREFETCH window: 0x00000096100000-0x000000970fffff

[ 0.423364] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06

[ 0.423545] pci 0000:00:1c.4: IO window: 0x3000-0x3fff

[ 0.423727] pci 0000:00:1c.4: MEM window: 0x9a100000-0x9b1fffff

[ 0.423909] pci 0000:00:1c.4: PREFETCH window: 0x00000097100000-0x000000980fffff

[ 0.424119] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07

[ 0.424300] pci 0000:00:1c.5: IO window: 0x2000-0x2fff

[ 0.424481] pci 0000:00:1c.5: MEM window: 0x99100000-0x9a0fffff

[ 0.424663] pci 0000:00:1c.5: PREFETCH window: 0x00000098100000-0x000000990fffff

[ 0.424862] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a

[ 0.425041] pci 0000:00:1e.0: IO window: disabled

[ 0.425222] pci 0000:00:1e.0: MEM window: disabled

[ 0.425402] pci 0000:00:1e.0: PREFETCH window: disabled

[ 0.425591] alloc irq_desc for 16 on cpu 0 node 0

[ 0.425592] alloc kstat_irqs on cpu 0 node 0

[ 0.425596] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 0.425779] pci 0000:00:01.0: setting latency timer to 64

[ 0.425786] alloc irq_desc for 17 on cpu 0 node 0

[ 0.425787] alloc kstat_irqs on cpu 0 node 0

[ 0.425791] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[ 0.425974] pci 0000:00:1c.0: setting latency timer to 64

[ 0.425981] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16

[ 0.426163] pci 0000:00:1c.1: setting latency timer to 64

[ 0.426170] pci 0000:00:1c.2: enabling device (0000 -> 0003)

[ 0.426351] alloc irq_desc for 18 on cpu 0 node 0

[ 0.426352] alloc kstat_irqs on cpu 0 node 0

[ 0.426355] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 0.426539] pci 0000:00:1c.2: setting latency timer to 64

[ 0.426546] pci 0000:00:1c.3: enabling device (0000 -> 0003)

[ 0.426726] alloc irq_desc for 19 on cpu 0 node 0

[ 0.426728] alloc kstat_irqs on cpu 0 node 0

[ 0.426731] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19

[ 0.426914] pci 0000:00:1c.3: setting latency timer to 64

[ 0.426921] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[ 0.427104] pci 0000:00:1c.4: setting latency timer to 64

[ 0.427111] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16

[ 0.427294] pci 0000:00:1c.5: setting latency timer to 64

[ 0.427300] pci 0000:00:1e.0: setting latency timer to 64

[ 0.427304] pci_bus 0000:00: resource 0 io: [0x00-0xffff]

[ 0.427306] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]

[ 0.427308] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]

[ 0.427310] pci_bus 0000:01: resource 1 mem: [0x90000000-0x92ffffff]

[ 0.427312] pci_bus 0000:01: resource 2 mem: [0x80000000-0x8fffffff]

[ 0.427314] pci_bus 0000:01: resource 3 mem: [0x0-0x0]

[ 0.427316] pci_bus 0000:02: resource 0 io: [0x8000-0x8fff]

[ 0.427318] pci_bus 0000:02: resource 1 mem: [0x9e200000-0x9f2fffff]

[ 0.427320] pci_bus 0000:02: resource 2 mem: [0x93000000-0x93ffffff]

[ 0.427322] pci_bus 0000:02: resource 3 mem: [0x0-0x0]

[ 0.427324] pci_bus 0000:03: resource 0 io: [0x6000-0x7fff]

[ 0.427326] pci_bus 0000:03: resource 1 mem: [0x9d200000-0x9e1fffff]

[ 0.427328] pci_bus 0000:03: resource 2 mem: [0x94000000-0x950fffff]

[ 0.427330] pci_bus 0000:03: resource 3 mem: [0x0-0x0]

[ 0.427332] pci_bus 0000:04: resource 0 io: [0x5000-0x5fff]

[ 0.427333] pci_bus 0000:04: resource 1 mem: [0x9c200000-0x9d1fffff]

[ 0.427335] pci_bus 0000:04: resource 2 mem: [0x95100000-0x960fffff]

[ 0.427337] pci_bus 0000:04: resource 3 mem: [0x0-0x0]

[ 0.427339] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]

[ 0.427341] pci_bus 0000:05: resource 1 mem: [0x9b200000-0x9c1fffff]

[ 0.427343] pci_bus 0000:05: resource 2 mem: [0x96100000-0x970fffff]

[ 0.427345] pci_bus 0000:05: resource 3 mem: [0x0-0x0]

[ 0.427347] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff]

[ 0.427349] pci_bus 0000:06: resource 1 mem: [0x9a100000-0x9b1fffff]

[ 0.427351] pci_bus 0000:06: resource 2 mem: [0x97100000-0x980fffff]

[ 0.427353] pci_bus 0000:06: resource 3 mem: [0x0-0x0]

[ 0.427355] pci_bus 0000:07: resource 0 io: [0x2000-0x2fff]

[ 0.427357] pci_bus 0000:07: resource 1 mem: [0x99100000-0x9a0fffff]

[ 0.427359] pci_bus 0000:07: resource 2 mem: [0x98100000-0x990fffff]

[ 0.427360] pci_bus 0000:07: resource 3 mem: [0x0-0x0]

[ 0.427362] pci_bus 0000:0a: resource 0 mem: [0x0-0x0]

[ 0.427364] pci_bus 0000:0a: resource 1 mem: [0x0-0x0]

[ 0.427366] pci_bus 0000:0a: resource 2 mem: [0x0-0x0]

[ 0.427367] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]

[ 0.427369] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]

[ 0.427424] NET: Registered protocol family 2

[ 0.460110] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.461010] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)

[ 0.462910] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[ 0.463598] TCP: Hash tables configured (established 262144 bind 65536)

[ 0.463779] TCP reno registered

[ 0.472145] NET: Registered protocol family 1

[ 0.472431] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1

[ 0.503999] Switched to high resolution mode on CPU 0

[ 0.593615] it is

[ 0.721027] Freeing initrd memory: 3408k freed

[ 0.722277] Simple Boot Flag value 0x5 read from CMOS RAM was invalid

[ 0.722461] Simple Boot Flag at 0x44 set to 0x1

[ 0.723508] audit: initializing netlink socket (disabled)

[ 0.723700] type=2000 audit(1241007514.720:1): initialized

[ 0.724153] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 0.724444] VFS: Disk quotas dquot_6.5.2

[ 0.724653] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 0.724891] msgmni has been set to 4021

[ 0.725185] alg: No test for stdrng (krng)

[ 0.725412] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 0.725608] io scheduler noop registered

[ 0.725785] io scheduler anticipatory registered

[ 0.725962] io scheduler deadline registered

[ 0.726158] io scheduler cfq registered (default)

[ 0.726728] pci 0000:01:00.0: Boot video device

[ 0.726850] pcieport-driver 0000:00:01.0: setting latency timer to 64

[ 0.726891] alloc irq_desc for 24 on cpu 0 node 0

[ 0.726894] alloc kstat_irqs on cpu 0 node 0

[ 0.726902] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X

[ 0.727040] pcieport-driver 0000:00:1c.0: setting latency timer to 64

[ 0.727099] alloc irq_desc for 25 on cpu 0 node 0

[ 0.727101] alloc kstat_irqs on cpu 0 node 0

[ 0.727106] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X

[ 0.727266] pcieport-driver 0000:00:1c.1: setting latency timer to 64

[ 0.727324] alloc irq_desc for 26 on cpu 0 node 0

[ 0.727326] alloc kstat_irqs on cpu 0 node 0

[ 0.727331] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X

[ 0.727492] pcieport-driver 0000:00:1c.2: setting latency timer to 64

[ 0.727550] alloc irq_desc for 27 on cpu 0 node 0

[ 0.727552] alloc kstat_irqs on cpu 0 node 0

[ 0.727557] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X

[ 0.727718] pcieport-driver 0000:00:1c.3: setting latency timer to 64

[ 0.727776] alloc irq_desc for 28 on cpu 0 node 0

[ 0.727778] alloc kstat_irqs on cpu 0 node 0

[ 0.727783] pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X

[ 0.727943] pcieport-driver 0000:00:1c.4: setting latency timer to 64

[ 0.728005] alloc irq_desc for 29 on cpu 0 node 0

[ 0.728007] alloc kstat_irqs on cpu 0 node 0

[ 0.728012] pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X

[ 0.728173] pcieport-driver 0000:00:1c.5: setting latency timer to 64

[ 0.728231] alloc irq_desc for 30 on cpu 0 node 0

[ 0.728233] alloc kstat_irqs on cpu 0 node 0

[ 0.728238] pcieport-driver 0000:00:1c.5: irq 30 for MSI/MSI-X

[ 0.731408] Linux agpgart interface v0.103

[ 0.731587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.733758] brd: module loaded

[ 0.733994] input: Macintosh mouse button emulation as /devices/virtual/input/input0

[ 0.734353] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12

[ 0.760669] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.760851] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 0.772075] mice: PS/2 mouse device common for all mice

[ 0.772316] rtc_cmos 00:04: RTC can wake from S4

[ 0.772548] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0

[ 0.772752] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs

[ 0.772963] cpuidle: using governor ladder

[ 0.773140] cpuidle: using governor menu

[ 0.773319] No iBFT detected.

[ 0.773784] TCP cubic registered

[ 0.773960] NET: Registered protocol family 17

[ 0.774271] registered taskstats version 1

[ 0.774610] rtc_cmos 00:04: setting system clock to 2009-04-29 12:18:35 UTC (1241007515)

[ 0.774871] Freeing unused kernel memory: 552k freed

[ 0.791920] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

[ 0.815304] SCSI subsystem initialized

[ 0.826470] libata version 3.00 loaded.

[ 0.829086] ahci 0000:00:1f.2: version 3.0

[ 0.829100] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 0.829324] alloc irq_desc for 31 on cpu 0 node 0

[ 0.829327] alloc kstat_irqs on cpu 0 node 0

[ 0.829334] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X

[ 0.829402] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode

[ 0.829598] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems

[ 0.829794] ahci 0000:00:1f.2: setting latency timer to 64

[ 0.830013] scsi0 : ahci

[ 0.830309] scsi1 : ahci

[ 0.830571] scsi2 : ahci

[ 0.830832] scsi3 : ahci

[ 0.831092] scsi4 : ahci

[ 0.831354] scsi5 : ahci

[ 0.831738] ata1: SATA max UDMA/133 abar m2048@0x9f305000 port 0x9f305100 irq 31

[ 0.842479] ata2: SATA max UDMA/133 abar m2048@0x9f305000 port 0x9f305180 irq 31

[ 0.842674] ata3: DUMMY

[ 0.842848] ata4: DUMMY

[ 0.843023] ata5: SATA max UDMA/133 abar m2048@0x9f305000 port 0x9f305300 irq 31

[ 0.843218] ata6: SATA max UDMA/133 abar m2048@0x9f305000 port 0x9f305380 irq 31

[ 1.324011] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 1.324592] ata1.00: ATA-8: TOSHIBA MK2552GSX, LV011C, max UDMA/100

[ 1.324772] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)

[ 1.325440] ata1.00: configured for UDMA/100

[ 1.340084] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2552GS LV01 PQ: 0 ANSI: 5

[ 2.228011] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 2.242320] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633L, 0400, max UDMA/100

[ 2.257164] ata2.00: configured for UDMA/100

[ 2.274197] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633L 0400 PQ: 0 ANSI: 5

[ 2.592013] ata5: SATA link down (SStatus 0 SControl 300)

[ 2.928011] ata6: SATA link down (SStatus 0 SControl 300)

[ 2.962747] ACPI: SSDT 7FCB4C98, 0223 (r1 PmRef Cpu0Ist 3000 INTL 20051117)

[ 2.963816] ACPI: SSDT 7FCB2598, 0537 (r1 PmRef Cpu0Cst 3001 INTL 20051117)

[ 2.964869] Monitor-Mwait will be used to enter C-1 state

[ 2.964875] Monitor-Mwait will be used to enter C-2 state

[ 2.964880] Monitor-Mwait will be used to enter C-3 state

[ 2.965039] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])

[ 2.965917] processor ACPI_CPU:00: registered as cooling_device0

[ 2.966099] ACPI: Processor [CPU0] (supports 8 throttling states)

[ 2.967169] ACPI: SSDT 7FCB3E18, 01CF (r1 PmRef ApIst 3000 INTL 20051117)

[ 2.968194] ACPI: SSDT 7FCB4F18, 008D (r1 PmRef ApCst 3000 INTL 20051117)

[ 2.969473] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])

[ 2.970339] processor ACPI_CPU:01: registered as cooling_device1

[ 2.970520] ACPI: Processor [CPU1] (supports 8 throttling states)

[ 2.971159] Marking TSC unstable due to TSC halts in idle

[ 2.975966] ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20081204]

[ 3.056252] Driver 'sd' needs updating - please use bus_type methods

[ 3.056538] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)

[ 3.056748] sd 0:0:0:0: [sda] Write Protect is off

[ 3.056929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 3.056949] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 3.057205] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)

[ 3.057411] sd 0:0:0:0: [sda] Write Protect is off

[ 3.057590] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 3.057611] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 3.057825] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >

[ 3.238591] sd 0:0:0:0: [sda] Attached SCSI disk

[ 3.500101] Clocksource tsc unstable (delta = -291553436 ns)

[ 3.575242] PM: Starting manual resume from disk

[ 3.634255] kjournald starting. Commit interval 5 seconds

[ 3.634456] EXT3-fs: mounted filesystem with ordered data mode.

[ 5.030373] udev: starting version 141

[ 5.249125] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

[ 5.258471] ACPI: AC Adapter [ACAD] (on-line)

[ 5.260076] ACPI: Power Button (FF) [PWRF]

[ 5.260375] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3

[ 5.272062] ACPI: Power Button (CM) [PWRB]

[ 5.272334] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4

[ 5.275661] ACPI: Lid Switch [LID0]

[ 5.275904] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5

[ 5.284025] ACPI: Sleep Button (CM) [sLPB]

[ 5.389827] ACPI: Battery Slot [bAT0] (battery present)

[ 5.390228] ACPI: WMI: Mapper loaded

[ 5.395751] acpi device:0a: registered as cooling_device2

[ 5.396103] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/device:08/input/input6

[ 5.408032] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)

[ 5.542033] input: PC Speaker as /devices/platform/pcspkr/input/input7

[ 5.600079] cfg80211: Using static regulatory domain info

[ 5.600269] cfg80211: Regulatory domain: US

[ 5.600446] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 5.600643] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)

[ 5.600846] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

[ 5.601027] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

[ 5.601208] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

[ 5.601388] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

[ 5.601569] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)

[ 5.601750] cfg80211: Calling CRDA for country: US

[ 5.887551] firewire_ohci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 5.887756] firewire_ohci 0000:06:00.0: setting latency timer to 64

[ 5.908809] lis3lv02d: 1-byte sensor found

[ 5.908993] lis3lv02d: hardware type HPDV5_I found.

[ 5.909194] Registered led device: hp::hddprotect

[ 5.964110] firewire_ohci: Added fw-ohci device 0000:06:00.0, OHCI version 1.10

[ 6.068105] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 6.068337] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19

[ 6.068550] ehci_hcd 0000:00:1a.7: setting latency timer to 64

[ 6.068554] ehci_hcd 0000:00:1a.7: EHCI Host Controller

[ 6.068818] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1

[ 6.072916] ehci_hcd 0000:00:1a.7: debug port 1

[ 6.073098] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported

[ 6.073115] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x9f305c00

[ 6.077232] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8

[ 6.085016] lis3_init_device: irq 23

[ 6.085218] lis3: registering device

[ 6.085427] lis3lv02d driver loaded.

[ 6.088060] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00

[ 6.088268] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 6.088444] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.088643] usb usb1: Product: EHCI Host Controller

[ 6.088834] usb usb1: Manufacturer: Linux 2.6.29-1-amd64 ehci_hcd

[ 6.089014] usb usb1: SerialNumber: 0000:00:1a.7

[ 6.089251] usb usb1: configuration #1 chosen from 1 choice

[ 6.089482] hub 1-0:1.0: USB hub found

[ 6.089667] hub 1-0:1.0: 4 ports detected

[ 6.089984] alloc irq_desc for 20 on cpu 0 node 0

[ 6.089986] alloc kstat_irqs on cpu 0 node 0

[ 6.089993] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20

[ 6.090209] ehci_hcd 0000:00:1d.7: setting latency timer to 64

[ 6.090212] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 6.090444] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2

[ 6.094555] ehci_hcd 0000:00:1d.7: debug port 1

[ 6.094740] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported

[ 6.094761] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x9f305800

[ 6.108023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[ 6.108244] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[ 6.108428] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.108627] usb usb2: Product: EHCI Host Controller

[ 6.108806] usb usb2: Manufacturer: Linux 2.6.29-1-amd64 ehci_hcd

[ 6.108987] usb usb2: SerialNumber: 0000:00:1d.7

[ 6.109234] usb usb2: configuration #1 chosen from 1 choice

[ 6.109444] hub 2-0:1.0: USB hub found

[ 6.109629] hub 2-0:1.0: 8 ports detected

[ 6.138943] uhci_hcd: USB Universal Host Controller Interface driver

[ 6.139202] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 6.139393] uhci_hcd 0000:00:1a.0: setting latency timer to 64

[ 6.139397] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[ 6.139643] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3

[ 6.139865] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a0e0

[ 6.140092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.140274] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.140469] usb usb3: Product: UHCI Host Controller

[ 6.140650] usb usb3: Manufacturer: Linux 2.6.29-1-amd64 uhci_hcd

[ 6.140852] usb usb3: SerialNumber: 0000:00:1a.0

[ 6.141070] usb usb3: configuration #1 chosen from 1 choice

[ 6.141296] hub 3-0:1.0: USB hub found

[ 6.141500] hub 3-0:1.0: 2 ports detected

[ 6.141773] alloc irq_desc for 21 on cpu 0 node 0

[ 6.141775] alloc kstat_irqs on cpu 0 node 0

[ 6.141782] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21

[ 6.141986] uhci_hcd 0000:00:1a.1: setting latency timer to 64

[ 6.141989] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[ 6.142212] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4

[ 6.142451] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a0c0

[ 6.142668] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.142853] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.143055] usb usb4: Product: UHCI Host Controller

[ 6.143233] usb usb4: Manufacturer: Linux 2.6.29-1-amd64 uhci_hcd

[ 6.143412] usb usb4: SerialNumber: 0000:00:1a.1

[ 6.143629] usb usb4: configuration #1 chosen from 1 choice

[ 6.143851] hub 4-0:1.0: USB hub found

[ 6.144061] hub 4-0:1.0: 2 ports detected

[ 6.144332] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20

[ 6.144523] uhci_hcd 0000:00:1d.0: setting latency timer to 64

[ 6.144526] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 6.144758] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5

[ 6.156097] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000a0a0

[ 6.156317] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.156512] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.156713] usb usb5: Product: UHCI Host Controller

[ 6.156899] usb usb5: Manufacturer: Linux 2.6.29-1-amd64 uhci_hcd

[ 6.157101] usb usb5: SerialNumber: 0000:00:1d.0

[ 6.157334] usb usb5: configuration #1 chosen from 1 choice

[ 6.157560] hub 5-0:1.0: USB hub found

[ 6.157760] hub 5-0:1.0: 2 ports detected

[ 6.158043] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 6.158233] uhci_hcd 0000:00:1d.1: setting latency timer to 64

[ 6.158236] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 6.158455] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6

[ 6.158673] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a080

[ 6.158881] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.159063] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.159257] usb usb6: Product: UHCI Host Controller

[ 6.159435] usb usb6: Manufacturer: Linux 2.6.29-1-amd64 uhci_hcd

[ 6.159614] usb usb6: SerialNumber: 0000:00:1d.1

[ 6.159830] usb usb6: configuration #1 chosen from 1 choice

[ 6.160064] hub 6-0:1.0: USB hub found

[ 6.160265] hub 6-0:1.0: 2 ports detected

[ 6.160602] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16

[ 6.160793] uhci_hcd 0000:00:1d.2: setting latency timer to 64

[ 6.160796] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 6.161017] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7

[ 6.161248] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000a060

[ 6.161499] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.161683] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.161879] usb usb7: Product: UHCI Host Controller

[ 6.162064] usb usb7: Manufacturer: Linux 2.6.29-1-amd64 uhci_hcd

[ 6.162257] usb usb7: SerialNumber: 0000:00:1d.2

[ 6.162496] usb usb7: configuration #1 chosen from 1 choice

[ 6.162717] hub 7-0:1.0: USB hub found

[ 6.162909] hub 7-0:1.0: 2 ports detected

[ 6.164660] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 6.164871] uhci_hcd 0000:00:1d.3: setting latency timer to 64

[ 6.164875] uhci_hcd 0000:00:1d.3: UHCI Host Controller

[ 6.165110] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8

[ 6.165341] uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000a040

[ 6.165552] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.165734] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.165928] usb usb8: Product: UHCI Host Controller

[ 6.166106] usb usb8: Manufacturer: Linux 2.6.29-1-amd64 uhci_hcd

[ 6.166285] usb usb8: SerialNumber: 0000:00:1d.3

[ 6.166503] usb usb8: configuration #1 chosen from 1 choice

[ 6.166725] hub 8-0:1.0: USB hub found

[ 6.166929] hub 8-0:1.0: 2 ports detected

[ 6.182398] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 6.182599] ACPI: I/O resource 0000:00:1f.3 [0xa000-0xa01f] conflicts with ACPI region SMBI [0xa000-0xa00f]

[ 6.182797] ACPI: Device needs an ACPI driver

[ 6.200627] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 6.200822] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[ 6.201017] r8169 0000:03:00.0: setting latency timer to 64

[ 6.201094] alloc irq_desc for 32 on cpu 0 node 0

[ 6.201096] alloc kstat_irqs on cpu 0 node 0

[ 6.201107] r8169 0000:03:00.0: irq 32 for MSI/MSI-X

[ 6.201356] eth0: RTL8168c/8111c at 0xffffc20000350000, 00:1e:68:e0:99:52, XID 3c4000c0 IRQ 32

[ 6.273466] Driver 'sr' needs updating - please use bus_type methods

[ 6.281072] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[ 6.281281] Uniform CD-ROM driver Revision: 3.20

[ 6.281539] sr 1:0:0:0: Attached scsi CD-ROM sr0

[ 6.439685] sdhci: Secure Digital Host Controller Interface driver

[ 6.456546] usb 2-4: new high speed USB device using ehci_hcd and address 2

[ 6.464150] firewire_core: created device fw0: GUID 00241b008bbf3401, S400

[ 6.511346] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)

[ 6.511565] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 6.511817] sdhci-pci 0000:06:00.1: setting latency timer to 64

[ 6.511850] Registered led device: mmc0::

[ 6.512079] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA

[ 6.512282] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)

[ 6.512489] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 6.512695] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.

[ 6.512882] sdhci-pci 0000:06:00.2: PCI INT A disabled

[ 6.568887] jmb38x_ms 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 6.569107] jmb38x_ms 0000:06:00.3: setting latency timer to 64

[ 6.599098] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 6.599305] sr 1:0:0:0: Attached scsi generic sg1 type 5

[ 6.615500] usb 2-4: New USB device found, idVendor=0408, idProduct=03ba

[ 6.615706] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3

[ 6.615922] usb 2-4: Product: HP Webcam

[ 6.616103] usb 2-4: Manufacturer: QCM

[ 6.616292] usb 2-4: SerialNumber: SN0001

[ 6.616548] usb 2-4: configuration #1 chosen from 1 choice

[ 6.804839] iwlagn: Intel® Wireless WiFi Link AGN driver for Linux, 1.3.27ks

[ 6.805482] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 6.805673] iwlagn 0000:02:00.0: setting latency timer to 64

[ 6.805710] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54

[ 6.826757] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels

[ 6.827280] iwlagn 0000:02:00.0: PCI INT A disabled

[ 6.827569] wmaster0 (iwlagn): not using net_device_ops yet

[ 6.827984] phy0: Selected rate control algorithm 'iwl-agn-rs'

[ 6.849239] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000

[ 6.856616] usb 4-2: new low speed USB device using uhci_hcd and address 2

[ 6.926100] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9

[ 6.970040] wlan0 (iwlagn): not using net_device_ops yet

[ 7.030693] usb 4-2: New USB device found, idVendor=093a, idProduct=2510

[ 7.030894] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 7.031076] usb 4-2: Product: USB OPTICAL MOUSE

[ 7.031253] usb 4-2: Manufacturer: PIXART

[ 7.031507] usb 4-2: configuration #1 chosen from 1 choice

[ 7.099233] Linux video capture interface: v2.00

[ 7.209042] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03ba)

[ 7.210751] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10

[ 7.228631] usbcore: registered new interface driver uvcvideo

[ 7.228827] USB Video Class driver (v0.1.0)

[ 7.283002] usbcore: registered new interface driver hiddev

[ 7.296981] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input11

[ 7.324614] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.1-2/input0

[ 7.324841] usbcore: registered new interface driver usbhid

[ 7.325021] usbhid: v2.6:USB HID core driver

[ 7.414403] alloc irq_desc for 22 on cpu 0 node 0

[ 7.414406] alloc kstat_irqs on cpu 0 node 0

[ 7.414413] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[ 7.414692] HDA Intel 0000:00:1b.0: setting latency timer to 64

[ 7.473477] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12

[ 7.620232] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input13

[ 7.636107] input: HDA Intel Mic at Sep UNKNOWN Jack as /devices/pci0000:00/0000:00:1b.0/input/input14

[ 7.668133] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input15

[ 9.029270] Adding 6040400k swap on /dev/sda7. Priority:-1 extents:1 across:6040400k

[ 9.292118] EXT3 FS on sda1, internal journal

[ 10.132931] loop: module loaded

[ 11.431043] fuse init (API version 7.11)

[ 11.545780] kjournald starting. Commit interval 5 seconds

[ 11.546020] EXT3 FS on sda9, internal journal

[ 11.546360] EXT3-fs: mounted filesystem with ordered data mode.

[ 11.565634] kjournald starting. Commit interval 5 seconds

[ 11.566038] EXT3 FS on sda8, internal journal

[ 11.566383] EXT3-fs: mounted filesystem with ordered data mode.

[ 11.594815] kjournald starting. Commit interval 5 seconds

[ 11.595048] EXT3 FS on sda5, internal journal

[ 11.595388] EXT3-fs: mounted filesystem with ordered data mode.

[ 11.621491] kjournald starting. Commit interval 5 seconds

[ 11.621881] EXT3 FS on sda6, internal journal

[ 11.622228] EXT3-fs: mounted filesystem with ordered data mode.

[ 14.363056] r8169: eth0: link up

[ 14.363256] r8169: eth0: link up

[ 20.368611] nvidia: module license 'NVIDIA' taints kernel.

[ 20.621995] nvidia 0000:01:00.0: power state changed by ACPI to D0

[ 20.622018] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 20.622038] nvidia 0000:01:00.0: setting latency timer to 64

[ 20.622299] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.44 Tue Mar 24 05:46:32 PST 2009

[ 20.626216] IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs

[ 500.967012] CPU0 attaching NULL sched-domain.

[ 500.967017] CPU1 attaching NULL sched-domain.

[ 500.980594] CPU0 attaching sched-domain:

[ 500.980597] domain 0: span 0-1 level MC

[ 500.980600] groups: 0 1

[ 500.980605] CPU1 attaching sched-domain:

[ 500.980607] domain 0: span 0-1 level MC

[ 500.980609] groups: 1 0

[ 512.553053] NET: Registered protocol family 10

[ 512.553529] lo: Disabled Privacy Extensions

[ 523.232010] eth0: no IPv6 routers present

[ 572.356034] CE: hpet increasing min_delta_ns to 15000 nsec

[ 2420.585679] CE: hpet increasing min_delta_ns to 22500 nsec

[ 5705.424583] CE: hpet increasing min_delta_ns to 33750 nsec

[ 5748.980131] CE: hpet increasing min_delta_ns to 50624 nsec

[ 9646.132045] usb 2-1: new high speed USB device using ehci_hcd and address 3

[ 9646.880483] usb 2-1: New USB device found, idVendor=05dc, idProduct=a740

[ 9646.880488] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 9646.880491] usb 2-1: Product: Gizmo!

[ 9646.880493] usb 2-1: Manufacturer: Crucial

[ 9646.880495] usb 2-1: SerialNumber: AA04011600000153

[ 9646.880611] usb 2-1: configuration #1 chosen from 1 choice

[ 9646.969446] Initializing USB Mass Storage driver...

[ 9646.969713] scsi6 : SCSI emulation for USB Mass Storage devices

[ 9646.969956] usbcore: registered new interface driver usb-storage

[ 9646.969959] USB Mass Storage support registered.

[ 9646.970697] usb-storage: device found at 3

[ 9646.970699] usb-storage: waiting for device to settle before scanning

[ 9651.968618] usb-storage: device scan complete

[ 9651.968652] isa bounce pool size: 16 pages

[ 9651.969763] scsi 6:0:0:0: Direct-Access Crucial Gizmo! 1100 PQ: 0 ANSI: 0 CCS

[ 9651.971717] sd 6:0:0:0: [sdb] 7831552 512-byte hardware sectors: (4.00 GB/3.73 GiB)

[ 9651.972788] sd 6:0:0:0: [sdb] Write Protect is off

[ 9651.972791] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00

[ 9651.972793] sd 6:0:0:0: [sdb] Assuming drive cache: write through

[ 9651.979841] sd 6:0:0:0: [sdb] 7831552 512-byte hardware sectors: (4.00 GB/3.73 GiB)

[ 9651.980849] sd 6:0:0:0: [sdb] Write Protect is off

[ 9651.980852] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00

[ 9651.980854] sd 6:0:0:0: [sdb] Assuming drive cache: write through

[ 9651.980857] sdb: sdb1

[ 9651.981980] sd 6:0:0:0: [sdb] Attached SCSI removable disk

[ 9651.982051] sd 6:0:0:0: Attached scsi generic sg2 type 0

[ 9657.882113] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystemwill be case sensitive!

[ 9725.843141] usb 2-1: USB disconnect, address 3

debian:/home/pantelis#

nske · 29 Απριλίου 2009

debian:/home/pantelis# mount /dev/cdrom /mnt/cdrom

mount: mount point /mnt/cdrom does not exist

το /mnt/cdrom πρέπει να είναι ένας υπαρκτός κατάλογος στον οποίον θα αντιστοιχιστούν τα περιεχόμενα του /dev/cdrom. Μπορείς είτε να τον δημιουργήσεις (π.χ. mkdir /mnt/cdrom) είτε να επιλέξεις κάποιον άλλον που υπάρχει (και δεν έχει περιεχόμενο που να πρέπει να είναι διαθέσιμο τη δεδομένη στιγμή).

Να δεις ποιοι κατάλογοι υπάρχουν και τι περιεχόμενο έχουν μπορείς με την ls (π.χ. ls /mnt).

ΥΣ. Όταν πας να κάνεις mount, αν αποτύχει ο driver, λογικά θα τυπωθεί ένα μήνυμα στο kernel log, οπότε αρκεί να παραθέσεις τις τελευταίες μόνο γραμμές της dmesg. Αν χρειάζεται να παραθέσεις τόσο μεγάλο log στο forum είναι καλύτερα να το βάζεις μέσα σε

 ή σε

tags για να μην χρειάζεται να scroll-άρουν όλοι 20+ οθόνες

teliparas · 29 Απριλίου 2009

λυθηκε

διωρθωσα την καταχωρηση στο

/etc/fstab

απο /dev/scdrom0 σε /dev/sr0

Σύνδεση

k3b - brasero

Προτεινόμενες αναρτήσεις

teliparas

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

nske

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

teliparas

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

nske

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

teliparas

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

nske

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

teliparas

Συνδέστε για να σχολιάσετε

Κοινοποίηση σε άλλες σελίδες

Αρχειοθετημένο

Σύνδεση