πρόβλημα με tv tuner σε mandriva

karap · 26 Φεβρουαρίου 2008

Γειά σας εχω ενα προβλημα με την καρτα τηλεορασης. Εχω την philips SAA7130 Video Broadcast Decoder (ετσι την διαβαζει) ,εχω βάλει και το kdetv το οποιο εκει που εχει για να διαλεξω device μου βγαζει video4linux: unknown/generic με αποτελεσμα να μην παιζει η tv.

DIMITRISG · 26 Φεβρουαρίου 2008

ριξε παλι μια ματια εδω

http://hardware4linux.info/

http://linux.bytesex.org/v4l2/saa7134.html

karap · 26 Φεβρουαρίου 2008

δεν εχω καταφερει ακομη

karap · 27 Φεβρουαρίου 2008

καμια ιδεα κανεις?

capthookb · 27 Φεβρουαρίου 2008

Ας δούμε καταρχήν αν έχουν φορτωθεί οι οδηγοί για την κάρτα σου. Γράψει σε κονσόλα είτε ως χρήστης είτε ως root την εντολή:

>
# lsmod

Ποιο μοντέλο είναι ακριβώς;

karap · 27 Φεβρουαρίου 2008

βγαζει παρα πολλα με αυτη την εντολη βγαζει παρα πολλα , την καρτα δεν τι βλεπω καπου. αλλα στις συσκευες control center την εχει. Εχω την crypto iii(3) και εδω την βλεπει σα philips SAA7130 Video Broadcast Decoder.

capthookb · 27 Φεβρουαρίου 2008

AN θες, γράψε εδώ όλα τα αποτελέσματα της παραπάνω εντολής καθώς και της εντολής dmesg. Για να σε διευκολύνω... κάνε αυτά σαν root:

>
# dmesg > /root/dmesg.txt
# lsmod > /root/lsmod.txt

μετά ανέβασε τα αρχεία dmesg.txt και lsmod.txt εδώ.

karap · 27 Φεβρουαρίου 2008

lsmod

Module Size Used by

ip_set_iptree 7208 2

iptable_raw 2688 0

xt_comment 2400 0

xt_policy 4544 0

xt_multiport 3808 4

ipt_ULOG 7940 0

ipt_TTL 2720 0

ipt_ttl 2400 0

ipt_TOS 2624 0

ipt_tos 2208 0

ipt_set 2784 2

ipt_SAME 2912 0

ipt_REJECT 4320 4

ipt_REDIRECT 2752 0

ipt_recent 8280 0

ipt_owner 2496 0

ipt_NETMAP 2720 0

ipt_MASQUERADE 3936 0

ipt_LOG 6624 10

ipt_iprange 2368 0

ipt_ECN 3232 0

ipt_ecn 2688 0

ipt_CLUSTERIP 7204 0

ipt_ah 2400 0

ipt_addrtype 2368 0

nf_nat_tftp 2304 0

nf_nat_snmp_basic 9636 0

nf_nat_sip 4960 0

nf_nat_pptp 3712 0

nf_nat_proto_gre 3012 1 nf_nat_pptp

nf_nat_irc 2912 0

nf_nat_h323 7040 0

nf_nat_ftp 3488 0

nf_nat_amanda 2656 0

ts_kmp 2624 5

nf_conntrack_amanda 4480 1 nf_nat_amanda

nf_conntrack_tftp 4852 1 nf_nat_tftp

nf_conntrack_sip 8052 1 nf_nat_sip

nf_conntrack_proto_sctp 8552 0

nf_conntrack_pptp 6272 1 nf_nat_pptp

nf_conntrack_proto_gre 5248 1 nf_conntrack_pptp

nf_conntrack_netlink 25248 0

nf_conntrack_netbios_ns 3072 0

nf_conntrack_irc 5912 1 nf_nat_irc

nf_conntrack_h323 48316 1 nf_nat_h323

nf_conntrack_ftp 7872 1 nf_nat_ftp

ip_set_portmap 4832 0

ip_set_macipmap 4676 0

ip_set_ipmap 4640 0

ip_set_iphash 8068 0

ip_set 18236 11 ip_set_iptree,ipt_set,ip_set_portmap,ip_set_macipmap,ip_set_ipmap,ip_set_iphash

xt_tcpmss 2752 0

xt_pkttype 2464 4

xt_physdev 3184 0

xt_NFQUEUE 2528 0

xt_NFLOG 2592 0

xt_MARK 2816 0

xt_mark 2432 0

xt_mac 2432 0

xt_limit 3008 0

xt_length 2528 0

xt_helper 2880 0

xt_hashlimit 8908 0

ip6_tables 13380 1 xt_hashlimit

nvidia 7813664 44

xt_dccp 3652 0

xt_conntrack 3136 0

xt_CONNMARK 3264 0

xt_connmark 2752 0

xt_CLASSIFY 2400 0

xt_tcpudp 3712 11

xt_state 2816 9

iptable_nat 7236 0

nf_nat 16844 14 ipt_SAME,ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,nf_nat_tftp,nf_nat_sip,nf_nat_pptp,nf_nat_proto_gre,nf_nat_irc,nf_nat_h323,nf_nat_ftp,nf_nat_amanda,nf_conntrack_netlink,iptable_nat

nf_conntrack_ipv4 14536 11 iptable_nat

nf_conntrack 55840 29 ipt_MASQUERADE,ipt_CLUSTERIP,nf_nat_tftp,nf_nat_snmp_basic,nf_nat_sip,nf_nat_pptp,nf_nat_irc,nf_nat_h323,nf_nat_ftp,nf_nat_amanda,nf_conntrack_amanda,nf_conntrack_tftp,nf_conntrack_sip,nf_conntrack_proto_sctp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_conntrack_netlink,nf_conntrack_netbios_ns,nf_conntrack_irc,nf_conntrack_h323,nf_conntrack_ftp,xt_helper,xt_conntrack,xt_CONNMARK,xt_connmark,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4

iptable_mangle 3008 1

nfnetlink 4280 1 nf_conntrack_netlink

iptable_filter 3136 1

ip_tables 12420 4 iptable_raw,iptable_nat,iptable_mangle,iptable_filter

x_tables 12068 45 xt_comment,xt_policy,xt_multiport,ipt_ULOG,ipt_TTL,ipt_ttl,ipt_TOS,ipt_tos,ipt_set,ipt_SAME,ipt_REJECT,ipt_REDIRECT,ipt_recent,ipt_owner,ipt_NETMAP,ipt_MASQUERADE,ipt_LOG,ipt_iprange,ipt_ECN,ipt_ecn,ipt_CLUSTERIP,ipt_ah,ipt_addrtype,xt_tcpmss,xt_pkttype,xt_physdev,xt_NFQUEUE,xt_NFLOG,xt_MARK,xt_mark,xt_mac,xt_limit,xt_length,xt_helper,xt_hashlimit,ip6_tables,xt_dccp,xt_conntrack,xt_CONNMARK,xt_connmark,xt_CLASSIFY,xt_tcpudp,xt_state,iptable_nat,ip_tables

usblp 12576 0

af_packet 17124 2

snd_seq_dummy 3524 0

snd_seq_oss 29248 0

snd_seq_midi_event 6848 1 snd_seq_oss

snd_seq 46064 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event

snd_seq_device 7180 3 snd_seq_dummy,snd_seq_oss,snd_seq

snd_pcm_oss 36896 0

snd_mixer_oss 14496 1 snd_pcm_oss

ipv6 243908 15 nf_conntrack_h323

video 16752 0

output 3552 1 video

tc1100_wmi 6212 0

sbs 12360 0

sbshc 5568 1 sbs

fan 4260 0

container 4256 0

dock 8432 0

w83627ehf 19716 0

hwmon_vid 3776 1 w83627ehf

battery 11268 0

ac 5028 0

binfmt_misc 9352 1

loop 14276 0

dm_mirror 20608 0

dm_mod 50948 1 dm_mirror

ide_cd 35328 1

ide_generic 1824 0 [permanent]

amd74xx 9360 0 [permanent]

ide_core 98572 3 ide_cd,ide_generic,amd74xx

floppy 54404 0

cpufreq_ondemand 7500 0

cpufreq_conservative 7144 0

cpufreq_powersave 2304 0

freq_table 4544 1 cpufreq_ondemand

fuse 39764 5

amd64_agp 10148 0

agpgart 27592 2 nvidia,amd64_agp

saa7134 121520 0

compat_ioctl32 1920 1 saa7134

videobuf_dma_sg 11396 1 saa7134

snd_hda_intel 332504 5

parport_pc 31652 0

videobuf_core 15364 2 saa7134,videobuf_dma_sg

parport 31464 1 parport_pc

ir_kbd_i2c 8304 1 saa7134

snd_pcm 66500 3 snd_pcm_oss,snd_hda_intel

ir_common 31140 2 saa7134,ir_kbd_i2c

snd_timer 19844 2 snd_seq,snd_pcm

snd_page_alloc 8456 2 snd_hda_intel,snd_pcm

videodev 27136 1 saa7134

rtc_cmos 7936 0

snd_hwdep 7332 1 snd_hda_intel

pcspkr 3264 0

v4l2_common 15936 2 saa7134,videodev

k8temp 5120 0

serio_raw 5988 0

snd 44228 18 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep

v4l1_compat 14372 2 saa7134,videodev

soundcore 6592 1 snd

forcedeth 46220 0

slamr 428168 0

thermal 13500 0

button 6992 0

processor 30088 1 thermal

i2c_nforce2 6400 0

i2c_core 19584 4 nvidia,saa7134,ir_kbd_i2c,i2c_nforce2

joydev 9920 0

evdev 9536 4

sg 30892 0

sata_nv 22760 5

libata 139920 1 sata_nv

sd_mod 26016 7

scsi_mod 129612 3 sg,libata,sd_mod

ext3 120968 2

jbd 40596 1 ext3

usbhid 41056 0

ff_memless 5544 1 usbhid

uhci_hcd 22928 0

ohci_hcd 23908 0

ssb 29156 1 ohci_hcd

pcmcia 32844 1 ssb

pcmcia_core 32692 1 pcmcia

ehci_hcd 33004 0

usbcore 122220 6 usblp,usbhid,uhci_hcd,ohci_hcd,ehci_hcd

karap · 27 Φεβρουαρίου 2008

dmesg

Linux version 2.6.24.2-desktop586-1mdv ([email protected]) (gcc version 4.2.2 20071128 (prerelease) (4.2.2-2mdv2008.1)) #1 SMP Mon Feb 11 13:17:22 BRST 2008

BIOS-provided physical RAM map:

BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)

BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)

BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)

BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)

BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)

Warning only 896MB will be used.

Use a HIGHMEM enabled kernel.

896MB LOWMEM available.

found SMP MP-table at 000ff780

Entering add_active_range(0, 0, 229376) 0 entries of 256 used

Zone PFN ranges:

DMA 0 -> 4096

Normal 4096 -> 229376

Movable zone start PFN for each node

early_node_map[1] active PFN ranges

0: 0 -> 229376

On node 0 totalpages: 229376

DMA zone: 32 pages used for memmap

DMA zone: 0 pages reserved

DMA zone: 4064 pages, LIFO batch:0

Normal zone: 1760 pages used for memmap

Normal zone: 223520 pages, LIFO batch:31

Movable zone: 0 pages used for memmap

DMI present.

ACPI: RSDP 000FA950, 0014 (r0 ACPIAM)

ACPI: RSDT 3FFD0000, 0034 (r1 A M I OEMRSDT 6000602 MSFT 97)

ACPI: FACP 3FFD0200, 0084 (r2 A M I OEMFACP 6000602 MSFT 97)

ACPI: DSDT 3FFD0440, 64B1 (r1 1ADGH 1ADGH000 0 INTL 2002026)

ACPI: FACS 3FFDE000, 0040

ACPI: APIC 3FFD0390, 0070 (r1 A M I OEMAPIC 6000602 MSFT 97)

ACPI: MCFG 3FFD0400, 003C (r1 A M I OEMMCFG 6000602 MSFT 97)

ACPI: OEMB 3FFDE040, 005B (r1 A M I AMI_OEM 6000602 MSFT 97)

Nvidia board detected. Ignoring ACPI timer override.

If you got timer trouble try acpi_use_timer_override

ACPI: PM-Timer IO Port: 0x2008

ACPI: Local APIC address 0xfee00000

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

Processor #0 15:11 APIC version 16

ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

Processor #1 15:11 APIC version 16

ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23

ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

ACPI: BIOS IRQ0 pin2 override ignored.

ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)

ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)

ACPI: IRQ9 used by override.

ACPI: IRQ14 used by override.

ACPI: IRQ15 used by override.

Enabling APIC mode: Flat. Using 1 I/O APICs

Using ACPI (MADT) for SMP configuration information

Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)

swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000

swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000

swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227584

Kernel command line: BOOT_IMAGE=linux root=/dev/sdb5 resume=/dev/sdb6 splash=silent vga=788

bootsplash: silent mode.

mapped APIC to ffffb000 (fee00000)

mapped IOAPIC to ffffa000 (fec00000)

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Initializing CPU#0

PID hash table entries: 4096 (order: 12, 16384 bytes)

Detected 2010.336 MHz processor.

spurious 8259A interrupt: IRQ7.

Console: colour dummy device 80x25

console [tty0] enabled

Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Memory: 902704k/917504k available (2268k kernel code, 14320k reserved, 775k data, 288k init, 0k highmem)

virtual kernel memory layout:

fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB)

vmalloc : 0xf8800000 - 0xfffb1000 ( 119 MB)

lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)

.init : 0xc0400000 - 0xc0448000 ( 288 kB)

.data : 0xc03373a3 - 0xc03f9284 ( 775 kB)

.text : 0xc0100000 - 0xc03373a3 (2268 kB)

Checking if this processor honours the WP bit even in supervisor mode... Ok.

SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1

Calibrating delay using timer specific routine.. 4022.61 BogoMIPS (lpj=2011308)

Security Framework initialized

AppArmor: AppArmor disabled by boottime parameter

Capability LSM initialized

Mount-cache hash table entries: 512

Initializing cgroup subsys ns

CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 512K (64 bytes/line)

CPU 0(2) -> Core 0

CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#0.

Compat vDSO mapped to ffffe000.

Checking 'hlt' instruction... OK.

SMP alternatives: switching to UP code

Early unpacking initramfs... done

Freeing initrd memory: 2472k freed

ACPI: Core revision 20070126

ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

CPU0: AMD Athlon 64 X2 Dual Core Processor 3800+ stepping 02

SMP alternatives: switching to SMP code

Booting processor 1/1 eip 3000

Initializing CPU#1

Calibrating delay using timer specific routine.. 4020.03 BogoMIPS (lpj=2010019)

CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 512K (64 bytes/line)

CPU 1(2) -> Core 1

CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#1.

CPU1: AMD Athlon 64 X2 Dual Core Processor 3800+ stepping 02

Total of 2 processors activated (8042.65 BogoMIPS).

ENABLING IO-APIC IRQs

..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1

Brought up 2 CPUs

net_namespace: 64 bytes

Booting paravirtualized kernel on bare hardware

NET: Registered protocol family 16

ACPI: bus type pci registered

PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved

PCI: Not using MMCONFIG.

PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6

PCI: Using configuration type 1

Setting up standard PCI resources

ACPI: EC: Look up EC in DSDT

ACPI: Interpreter enabled

ACPI: (supports S0 S1 S3 S4 S5)

ACPI: Using IOAPIC for interrupt routing

Error attaching device data

ACPI: PCI Root Bridge [PCI0] (0000:00)

PCI: Transparent bridge - 0000:00:06.0

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]

ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11

ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5

ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.

ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.

ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.

ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10

ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.

ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.

ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15

ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.

ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10

ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10

ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15

ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11

ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5

ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11

ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5

ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.

ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled.

ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 36, should be 27 [20070126]

Linux Plug and Play Support v0.97 © Adam Belay

pnp: PnP ACPI init

ACPI: bus type pnp registered

pnp: PnP ACPI: found 14 devices

ACPI: ACPI bus type pnp unregistered

PnPBIOS: Disabled

PCI: Using ACPI for IRQ routing

PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

ACPI: RTC can wake from S4

system 00:09: ioport range 0x4d0-0x4d1 has been reserved

system 00:09: ioport range 0x800-0x80f has been reserved

system 00:09: ioport range 0x2000-0x207f has been reserved

system 00:09: ioport range 0x2080-0x20ff has been reserved

system 00:09: ioport range 0x2400-0x247f has been reserved

system 00:09: ioport range 0x2480-0x24ff has been reserved

system 00:09: ioport range 0x2800-0x287f has been reserved

system 00:09: ioport range 0x2880-0x28ff has been reserved

system 00:09: ioport range 0x2c00-0x2c7f has been reserved

system 00:09: ioport range 0x2c80-0x2cff has been reserved

system 00:09: iomem range 0xfbe80000-0xfbebffff has been reserved

system 00:09: iomem range 0xfee01000-0xfeefffff could not be reserved

system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved

system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved

system 00:0b: ioport range 0xa00-0xa0f has been reserved

system 00:0b: ioport range 0xa10-0xa1f has been reserved

system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved

system 00:0d: iomem range 0x0-0x9ffff could not be reserved

system 00:0d: iomem range 0xc0000-0xcffff could not be reserved

system 00:0d: iomem range 0xe0000-0xfffff could not be reserved

system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved

system 00:0d: iomem range 0xff780000-0xffffffff could not be reserved

PCI: Bridge: 0000:00:06.0

IO window: disabled.

MEM window: fbf00000-fbffffff

PREFETCH window: cf000000-cfffffff

PCI: Bridge: 0000:00:0b.0

IO window: disabled.

MEM window: disabled.

PREFETCH window: disabled.

PCI: Bridge: 0000:00:0c.0

IO window: disabled.

MEM window: disabled.

PREFETCH window: disabled.

PCI: Bridge: 0000:00:0d.0

IO window: disabled.

MEM window: disabled.

PREFETCH window: disabled.

PCI: Bridge: 0000:00:0e.0

IO window: disabled.

MEM window: disabled.

PREFETCH window: disabled.

PCI: Bridge: 0000:00:0f.0

IO window: disabled.

MEM window: fc000000-febfffff

PREFETCH window: d0000000-dfffffff

PCI: Setting latency timer of device 0000:00:06.0 to 64

PCI: Setting latency timer of device 0000:00:0b.0 to 64

PCI: Setting latency timer of device 0000:00:0c.0 to 64

PCI: Setting latency timer of device 0000:00:0d.0 to 64

PCI: Setting latency timer of device 0000:00:0e.0 to 64

PCI: Setting latency timer of device 0000:00:0f.0 to 64

NET: Registered protocol family 2

Time: acpi_pm clocksource has been installed.

Switched to high resolution mode on CPU 0

Switched to high resolution mode on CPU 1

IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

TCP: Hash tables configured (established 131072 bind 65536)

TCP reno registered

apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)

apm: overridden by ACPI.

audit: initializing netlink socket (disabled)

audit(1204129841.341:1): initialized

Total HugeTLB memory allocated, 0

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered (default)

Boot video device is 0000:06:00.0

PCI: Setting latency timer of device 0000:00:0b.0 to 64

assign_interrupt_mode Found MSI capability

Allocate Port Service[0000:00:0b.0:pcie00]

PCI: Setting latency timer of device 0000:00:0c.0 to 64

assign_interrupt_mode Found MSI capability

Allocate Port Service[0000:00:0c.0:pcie00]

PCI: Setting latency timer of device 0000:00:0d.0 to 64

assign_interrupt_mode Found MSI capability

Allocate Port Service[0000:00:0d.0:pcie00]

PCI: Setting latency timer of device 0000:00:0e.0 to 64

assign_interrupt_mode Found MSI capability

Allocate Port Service[0000:00:0e.0:pcie00]

PCI: Setting latency timer of device 0000:00:0f.0 to 64

assign_interrupt_mode Found MSI capability

Allocate Port Service[0000:00:0f.0:pcie00]

vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 262144k

vesafb: mode is 800x600x16, linelength=1600, pages=2

vesafb: protected mode interface info at c000:d5a0

vesafb: pmi: set display start = c00cd5d6, set palette = c00cd640

vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da

vesafb: scrolling: redraw

vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 188037 bytes,<6>...found (800x600, 187989 bytes, v3).

Console: switching to colour frame buffer device 93x31

fb0: VESA VGA frame buffer device

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19

ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 16

ACPI: PCI interrupt for device 0000:01:01.0 disabled

RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize

PNP: No PS/2 controller found. Probing ports directly.

serio: i8042 KBD port at 0x60,0x64 irq 1

serio: i8042 AUX port at 0x60,0x64 irq 12

mice: PS/2 mouse device common for all mice

cpuidle: using governor ladder

cpuidle: using governor menu

TCP cubic registered

NET: Registered protocol family 1

Using IPI No-Shortcut mode

registered taskstats version 1

BIOS EDD facility v0.16 2004-Jun-25, 6 devices found

Freeing unused kernel memory: 288k freed

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23

ACPI: PCI Interrupt 0000:00:02.1 -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 17

PCI: Setting latency timer of device 0000:00:02.1 to 64

ehci_hcd 0000:00:02.1: EHCI Host Controller

ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1

ehci_hcd 0000:00:02.1: debug port 1

PCI: cache line size of 64 is not supported by device 0000:00:02.1

ehci_hcd 0000:00:02.1: irq 17, io mem 0xfbefac00

ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 10 ports detected

ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver

ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22

ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 18

PCI: Setting latency timer of device 0000:00:02.0 to 64

ohci_hcd 0000:00:02.0: OHCI Host Controller

ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2

ohci_hcd 0000:00:02.0: irq 18, io mem 0xfbefb000

usb usb2: configuration #1 chosen from 1 choice

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 10 ports detected

USB Universal Host Controller Interface driver v3.0

usb 2-1: new low speed USB device using ohci_hcd and address 2

usb 2-1: configuration #1 chosen from 1 choice

usb 2-2: new low speed USB device using ohci_hcd and address 3

usb 2-2: configuration #1 chosen from 1 choice

usb 2-5: new low speed USB device using ohci_hcd and address 4

usb 2-5: configuration #1 chosen from 1 choice

usb 2-6: new low speed USB device using ohci_hcd and address 5

usb 2-6: configuration #1 chosen from 1 choice

usbcore: registered new interface driver hiddev

input: Microsoft Basic Optical Mouse as /class/input/input0

input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.0-1

input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input1

input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:02.0-2

input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input2

input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:02.0-2

input: GreenAsia Inc. USB Joystick as /class/input/input3

hid-plff: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula <[email protected]>

input,hidraw3: USB HID v1.10 Joystick [GreenAsia Inc. USB Joystick ] on usb-0000:00:02.0-5

input: GreenAsia Inc. USB Joystick as /class/input/input4

hid-plff: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula <[email protected]>

input,hidraw4: USB HID v1.10 Joystick [GreenAsia Inc. USB Joystick ] on usb-0000:00:02.0-6

usbcore: registered new interface driver usbhid

drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

SCSI subsystem initialized

Driver 'sd' needs updating - please use bus_type methods

libata version 3.00 loaded.

sata_nv 0000:00:05.0: version 3.5

ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21

ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 19

PCI: Setting latency timer of device 0000:00:05.0 to 64

scsi0 : sata_nv

scsi1 : sata_nv

ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 19

ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 19

ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

ata1.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7

ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)

ata1.00: configured for UDMA/133

ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

ata2.00: ATA-8: WDC WD2500AAJS-00VTA0, 01.01B01, max UDMA/133

ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)

ata2.00: configured for UDMA/133

scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5

sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

sda: sda1

sd 0:0:0:0: [sda] Attached SCSI disk

scsi 1:0:0:0: Direct-Access ATA WDC WD2500AAJS-0 01.0 PQ: 0 ANSI: 5

sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)

sd 1:0:0:0: [sdb] Write Protect is off

sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)

sd 1:0:0:0: [sdb] Write Protect is off

sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >

sd 1:0:0:0: [sdb] Attached SCSI disk

ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20

ACPI: PCI Interrupt 0000:00:05.1 -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20

PCI: Setting latency timer of device 0000:00:05.1 to 64

scsi2 : sata_nv

scsi3 : sata_nv

ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 20

ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 20

ata3: SATA link down (SStatus 0 SControl 300)

ata4: SATA link down (SStatus 0 SControl 300)

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

sd 0:0:0:0: Attached scsi generic sg0 type 0

sd 1:0:0:0: Attached scsi generic sg1 type 0

i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00

i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00

input: Power Button (FF) as /class/input/input5

ACPI: Power Button (FF) [PWRF]

input: Power Button (CM) as /class/input/input6

ACPI: Power Button (CM) [PWRB]

slamr: module license 'Smart Link Ltd.' taints kernel.

slamr: SmartLink AMRMO modem.

slamr: probe 2000:2800 SL2800 card...

ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 16

slamr: slamr0 is SL2800 card.

forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.

ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23

ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 17

PCI: Setting latency timer of device 0000:00:08.0 to 64

input: PC Speaker as /class/input/input7

rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0

rtc0: alarms up to one year, y3k

Linux video capture interface: v2.00

parport_pc 00:08: reported by Plug and Play ACPI

parport0: PC-style at 0x378, irq 7 [PCSPP]

saa7130/34: v4l2 driver version 0.2.14 loaded

forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:bc:0e:11

forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3

ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22

ACPI: PCI Interrupt 0000:00:06.1 -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 18

PCI: Setting latency timer of device 0000:00:06.1 to 64

hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...

ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18

ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 21

saa7130[0]: found at 0000:01:00.0, rev: 1, irq: 21, latency: 64, mmio: 0xfbfffc00

saa7130[0]: subsystem: 1131:203e, board: UNKNOWN/GENERIC [card=0,autodetected]

saa7130[0]: board init: gpio is 4131ff

saa7130[0]: i2c eeprom 00: 31 11 3e 20 08 20 1c 55 43 43 a9 1c 55 43 43 a9

saa7130[0]: i2c eeprom 10: ff ff 00 00 31 30 4d 4f 4f 4e 53 37 31 33 30 20

saa7130[0]: i2c eeprom 20: 41 3e 48 53 ff ff ff ff ff ff ff ff ff ff ff ff

saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

saa7130[0]: registered device video0 [v4l2]

saa7130[0]: registered device vbi0

Linux agpgart interface v0.102

fuse init (API version 7.8)

fuse distribution version: 2.7.2

powernow-k8: Found 1 AMD Athlon 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)

powernow-k8: MP systems not supported by PSB BIOS structure

Floppy drive(s): fd0 is 1.44M

FDC 0 is a post-1991 82077

vboxadd: VirtualBox PCI device not found.

vboxvfs: Unknown symbol vboxadd_cmc_open

vboxvfs: Unknown symbol vboxadd_cmc_ctl_guest_filter_mask

vboxvfs: Unknown symbol vboxadd_cmc_call

vboxvfs: Unknown symbol vboxadd_cmc_close

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

NFORCE-MCP55: IDE controller (0x10de:0x036e rev 0xa1) at PCI slot 0000:00:04.0

NFORCE-MCP55: not 100% native mode: will probe irqs later

NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround.

NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller

ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio

NFORCE-MCP55: IDE port disabled

Probing IDE interface ide0...

hda: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive

hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4

hda: UDMA/66 mode selected

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

Probing IDE interface ide1...

hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache

Uniform CD-ROM driver Revision: 3.20

device-mapper: uevent: version 1.0.3

device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]

loop: module loaded

EXT3 FS on sdb5, internal journal

Adding 2176768k swap on /dev/sdb6. Priority:-1 extents:1 across:2176768k

kjournald starting. Commit interval 5 seconds

EXT3 FS on sdb7, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 188037 bytes,<6>...found (800x600, 187989 bytes, v3).

bootsplash: status on console 0 changed to on

nf_conntrack version 0.5.0 (14336 buckets, 57344 max)

w83627ehf: Found W83627EHG chip at 0xa10

No dock devices found.

NET: Registered protocol family 10

lo: Disabled Privacy Extensions

NET: Registered protocol family 17

usbcore: registered new interface driver usblp

Netfilter messages via NETLINK v0.30.

nf_conntrack version 0.5.0 (14336 buckets, 57344 max)

ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 17

ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNEB] -> GSI 17 (level, low) -> IRQ 22

PCI: Setting latency timer of device 0000:06:00.0 to 64

NVRM: loading NVIDIA UNIX x86 Kernel Module 169.09 Fri Jan 11 14:38:28 PST 2008

ctnetlink v0.93: registering with nfnetlink.

ClusterIP Version 0.8 loaded successfully

iptables[6793]: segfault at b7dbc020 eip b7f14914 esp bfc38330 error 7

eth0: no IPv6 routers present