Benchmarking ... Let's see how good we are ... ;)

[Xristaras12]

Εδω με τον παππού στα 4.4 all cores.

[akoinonitos]

ενα ts με το βεγγο

[tmaestros]

Ένα τεστ κ από εμένα... https://www.3dmark.com/3dm/35169093

[ultraex2003]

The first beta of new version, MSI Afterburner 4.6.1 beta 1

http://download-eu2.guru3d.com/afterburner/MSIAfterburnerSetup461Beta1Build15125.rar

Changes list includes:

· Added asynchronous dual fan control support for reference design NVIDIA GeForce RTX 20x0 series graphics cards. Please take a note that only 100% NVIDIA reference design dual fan control implementations are supported, third party proprietary asynchronous fan control solutions (e.g. EVGA iCX series asynchronous fans) are not supported and will not be supported in future versions. The following asynchronous fan control functionality is available:
o Added new “Synchronize fan speeds” button, which is allowing you to switch between synchronous and asynchronours fan control modes. Please take a note that new fan speed controls are available in v4 skins only, v3 and v2 skins are deprecated and no longer receive new functionality
o When fan speeds synchronization is enabled, MSI Afterburner’s fan control functionality behaves exactly like in the previous version, i.e. both fans are running asynchronically in default hardware automatic fan speed control mode but become linked synchronically if you enable manual or software automatic fan speed control mode
o When fan speeds synchronization is disabled, you may select and adjust each fan speed independently. For software automatic fan speed control mode independent temperature curves are also adjustable for each fan
· Improved hardware monitoring module:
o Inverted hotkeys handling approach for multiple selected hardware monitoring graphs. Previously single graph settings mode was active by default, but you could apply some settings (e.g. “Show in On-Screen Display”) to multiple selected graphs with <Ctrl> hotkey modifier. Now such settings are applied to multiple selected graphs by default and <Ctrl> hotkey modifier is used to apply settings to single focused graph
o Group operation notifier has been moved to hardware monitoring graph properties header
o Improved backward compatibility with monitoring profiles created in the previous versions of application. It is no longer necessary to recreate the profiles having monitoring settings without On-Screen Display layout
· Fixed issue with GUI stopping responding during adjusting skin scaling ratio on the fly in high DPI mode when skin composition mode was set to layered mode with alpha
· RivaTuner Statistics Server has been upgraded to v7.2.2

[akoinonitos]

ενα λιγο καλυτερο ts

https://www.3dmark.com/3dm/35196371?

και ενα fs

https://www.3dmark.com/fs/18982533

 

Επεξ/σία 7 Απριλίου 2019 από akoinonitos

[ziaba]

μπορεί κάποιος να τρέξει το userbenchmark με την rx580 8gb και να ανεβάσει το αποτέλεσμα?

Επεξ/σία 9 Απριλίου 2019 από ziaba

[obijuan1983]

Intel Core 2 Duo E8500 @ Chiller /  1.72v

 

 

[ultraex2003]

MSI Afterburner 4.6.1 Beta 2 

MSI Afterburner 4.6.1 Beta 2 is now raised to build number 15447. For those interested, we added a new skin called Touch of Modern (see below). Also, we started implementing dual-fan control for reference design NVIDIA GeForce RTX 20x0 series graphics cards.

MSI Afterburner 4.6.1

Added new MSI Touch of Modern skin by Drerex design

Added asynchronous dual fan control support for reference design NVIDIA GeForce RTX 20x0 series graphics cards. Please take a note that only 100% NVIDIA reference design dual fan control implementations are supported, third-party proprietary asynchronous fan control solutions (e.g. EVGA iCX series asynchronous fans) are not supported and will not be supported in future versions. The following asynchronous fan control functionality is available:

Added new “Synchronize fan speeds” button, which is allowing you to switch between synchronous and asynchronous fan control modes. Please take a note that new fan speed controls are available in v4 skins only, v3 and v2 skins are deprecated and no longer receive new functionalitWhen fan speeds synchronization is enabled, MSI Afterburner’s fan control functionality behaves exactly like in the previous version, i.e. both fans are running a synchronically in default hardware automatic fan speed control mode but become linked synchronically if you enable manual or software automatic fan speed control mode

When fan speeds synchronization is disabled, you may select and adjust each fan speed independently. For software automatic fan speed control mode independent temperature curves are also adjustable for each fan

Improved hardware monitoring module:

Inverted hotkeys handling approach for multiple selected hardware monitoring graphs. Previously single graph settings mode was active by default, but you could apply some settings (e.g. “Show in On-Screen Display”) to multiple selected graphs with <Ctrl> hotkey modifier. Now such settings are applied to multiple selected graphs by default and <Ctrl> hotkey modifier is used to apply settings to single focused graph

Group operation notifier has been moved to hardware monitoring graph properties header

Improved backward compatibility with monitoring profiles created in the previous versions of application. It is no longer necessary to recreate the profiles having monitoring settings without On-Screen Display layout

It is no longer necessary to click <Apply> button inside the On-Screen Display layout editor after changing current layout, now the changes are applied properly on closing the editor

Improved voltage/frequency curve editor for both AMD and NVIDIA GPUs:Now you may hold <Shift> and press left mouse button on initial desired horizontal position in the editor window to begin fragment selection, then drag mouse cursor to desired final horizontal position and release left mouse button to select a fragment. The following functionality is available for selected fragments:

You may double click the editor window to reset fragment selection

You may adjust the offset for any point inside the selection with mouse cursor to apply the same offset simultaneously to all selected points

You may adjust the offset for any point inside the selection with keyboard cursor keys, <Enter> or <Shift>+<Enter> keys to apply the same offset or specify the same target frequency or voltage for all selected points

Improved skin engine:

Skin engine no longer crashes when switching between the skins having the same site with and without alpha channel

Added thumbless skinned slider controls support

Added alpha path threshold support for skinned slider controls

Improved skin cross-compatibility layer:

Extended list of applications supported by skin cross-compatibility layer

Various compatibility fixes for third party skins supported by cross-compatibility layer

Fixed issue with GUI stopping responding during adjusting skin scaling ratio on the fly in high DPI mode when skin composition mode was set to layered mode with alpha

RivaTuner Statistics Server has been upgraded to v7.2.2

 

edit :

 4.6.1 is receiving more and more awesome features! Voltage/frequency editor just got upgraded

 now it is allowing you to select a fragment and adjust all points inside the fragment simultaneously. 

This greatly simplifies the process of creating downvoltage oriented curves.

This feature applies to both AMD and NVIDIA implementations of VF curve editor:

 

 

Επεξ/σία 14 Απριλίου 2019 από ultraex2003

[Psycho_Warhead]

Το skin μοιάζει πολύ με το EVGA Precision.

[BabisTs]

6 ώρες πριν, ultraex2003 είπε

MSI Afterburner 4.6.1 Beta 2 

MSI Afterburner 4.6.1 Beta 2 is now raised to build number 15447. For those interested, we added a new skin called Touch of Modern

RivaTuner Statistics Server has been upgraded to v7.2.2

ωραίο το new skin bro!Thanx....

Επεξ/σία 11 Απριλίου 2019 από BabisTs

[akoinonitos]

[akoinonitos]

[ultraex2003]

msi afterburner 4.6.1 Beta 3 is available for download with the following changes:

https://www.guru3d.com/files-details/msi-afterburner-beta-download.html

This build contains experimental ICX2 temperature sensors monitoring support.

o Similar to the fist ICX generation, support is provided via third party hardware database so you need to select "third party" mode next to "Enable voltage control" in "General" tab.

o The progress of saving multiple graphs’ settings is now displayed in the caption of the application’s property sheet
o Optimized handling of “dirty” flag for settings decreases saving time for multiple graph’s settings when using multiple subsequent group operations
o Added new “Hide attached monitoring panel” command to the context menu of hardware monitoring window. You may use it to toggle visibility of monitoring window when it is attached to the main application window
o Now you may press <Ctrl> + <M> hotkeys to toggle monitoring window attachment
o Updated third party hardware database:
o Added new third party voltage control capable graphics cards to the database
o Added new third party graphics cards with multichannel GPU, memory and VRM temperature sensors to the database
 

 

[ultraex2003]

3770k@ 4.8

290 trixx @ 1150 /6000

drivers 19.4.2

win 10 insider  [20H1]  1903 /18875

 

 

                                                                                                              World War Z

                                                                                                       in game settings/benchmark/1080p

Ultra Preset

High preset

Επεξ/σία 18 Απριλίου 2019 από ultraex2003

[kats777]

Παρθενος του OC μπαινω σιγα σιγα..