ISA PNP ethernet adapter.

[firewalker]

Έβαλα μία κάρτα δυκτίου 3com EthernetLinlk III ISAPNP αλλά δεν την βλέπει. Οι ISA συσκευές θέλουν κάποια ειδική μεταχείριση;

[firewalker]

Το pnpdump μου έδωσε:

 

># $Id: pnpdump_main.c,v 1.27 2001/04/30 21:54:53 fox Exp $
# Release isapnptools-1.26
#
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of the output file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags:  -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER -DHAVE_NANOSLEEP -DWANT_TO_VALIDATE
#
# Trying port address 0273
# Board 1 has serial identifier 2f 08 65 d8 cf 98 50 6d 50

# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 2f 08 65 d8 cf 98 50 6d 50)
# Vendor Id TCM5098, Serial Number 140892367, checksum 0x2F.
# Version 1.0, Vendor version 1.0
# ANSI string -->3Com 3C509B EtherLink III<--
#
# Logical device id TCM5098
#     Device supports I/O range check register
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3d
#     Device supports vendor reserved register @ 0x3e
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE TCM5098/140892367 (LD 0
#     Compatible device id PNP80f7
#     IRQ 3, 5, 7, 9, 10, 11, 12 or 15.
#         High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 3 (MODE +E)))
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x0210
#         Maximum IO base address 0x03e0
#         IO base alignment 16 bytes
#         Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0210) (CHECK))
(NAME "TCM5098/140892367[0]{3Com 3C509B EtherLink III}")
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)

 

Τώρα;

[merkoutio]

Μήπως εννοείς κάρτα δικτύου 3Com 3C509B EtherLink III ISA

Network Interface Card (NIC);

Αν ναι. τότε κοίταξε εδώ

[firewalker]

Μήπως εννοείς κάρτα δικτύου 3Com 3C509B EtherLink III ISA

Network Interface Card (NIC);

Αν ναι. τότε κοίταξε εδώ

 

Αυτή είναι αλλά θέλω για linux. Μάλλον θα πρέπει να κάνω recompile ton kernel με υποστήριξη (αν υπάρχει) για τις κάρτες αυτές.

 

Edit: Βρήκα το module: 3c509.ko και φαίνεται να είναι οκ.