Aργή εκκίνηση ubuntu

[nigiana]

Εδώ και μία εβδομάδα, όταν ξεκινάει να κανε boot και πρωτο εμφανίζεται η οθόνη ubuntu με την process bar, κολάει για 1 λεπτό περίπου.Στη συνέχεια η process bar κινείτε και απο εκει και περα οι χρονοι εκκίνησης μου φαίνονται εντάξει.

Ξέρει κανείς κάτι;

[chek2fire]

μηπως σου κανει κανα check στους δισκους σου?δοκιμασε να μπεις σε recovery console να δεις που κολαει ακριβως.εκει κατα την εκινηση θα σου εμφανισει διαφορες εντολες με τις συσκευες που φορτωνει

[k_antoni]

κόψε κ καμια άχρηστη υπηρεσία http://ubuntuforums.org/showthread.php?t=89491

 

έχει παλιότερες εκδόσεις, αλλά μπορεί να σου φανεί χρήσιμο...

γενικά το linux σηκώνεται κάπως αργά, αλλά ποιος κλείνει ενα μηχάνημα με linux ή κάνει επανεκκίνηση?

[nigiana]

έχω κόψει τις υπηρεσιες αν και είναι ασχετο αφού στην αρχή σαν να μην bootarei.

την προηγουμενη φορά μου έκανε check και έγραψε activity swapfile swap fail και μετά ξεκίνησε κανονικά

Πουθενά αλλου δεν έχω πρόβλημα

[k_antoni]

για να δούμε κανα dmesg

[nigiana]

dmesg

[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] sanitize start

[ 0.000000] sanitize end

[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1

[ 0.000000] copy_e820_map() type is E820_RAM

[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2

[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2

[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1

[ 0.000000] copy_e820_map() type is E820_RAM

[ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000008000 end: 000000003fff8000 type: 3

[ 0.000000] copy_e820_map() start: 000000003fff8000 size: 0000000000008000 end: 0000000040000000 type: 4

[ 0.000000] copy_e820_map() start: 00000000ffee0000 size: 000000000002ffff end: 00000000fff0ffff type: 2

[ 0.000000] copy_e820_map() start: 00000000fffc0000 size: 0000000000040000 end: 0000000100000000 type: 2

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)

[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)

[ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)

[ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff0ffff (reserved)

[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)

[ 0.000000] 127MB HIGHMEM available.

[ 0.000000] 896MB LOWMEM available.

[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0 -> 4096

[ 0.000000] Normal 4096 -> 229376

[ 0.000000] HighMem 229376 -> 262128

[ 0.000000] early_node_map[1] active PFN ranges

[ 0.000000] 0: 0 -> 262128

[ 0.000000] On node 0 totalpages: 262128

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 4064 pages, LIFO batch:0

[ 0.000000] Normal zone: 1760 pages used for memmap

[ 0.000000] Normal zone: 223520 pages, LIFO batch:31

[ 0.000000] HighMem zone: 255 pages used for memmap

[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7

[ 0.000000] DMI 2.3 present.

[ 0.000000] ACPI: RSDP (v000 AMI ) @ 0x000fa2e0

[ 0.000000] ACPI: RSDT (v001 AMIINT SiS645XX 0x00000010 MSFT 0x0100000b) @ 0x3fff0000

[ 0.000000] ACPI: FADT (v002 AMIINT SiS645XX 0x00000011 MSFT 0x0100000b) @ 0x3fff0030

[ 0.000000] ACPI: DSDT (v001 SiS 645 0x00001000 MSFT 0x0100000d) @ 0x00000000

[ 0.000000] ACPI: PM-Timer IO Port: 0x808

[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfee0000)

[ 0.000000] Detected 1792.743 MHz processor.

[ 24.592920] Built 1 zonelists. Total pages: 260081

[ 24.592928] Kernel command line: root=UUID=d331cba1-8cf8-4690-be7e-6c4a0e113664 ro quiet splash

[ 24.593177] Local APIC disabled by BIOS -- you can enable it with "lapic"

[ 24.593191] mapped APIC to ffffd000 (0180c000)

[ 24.593196] Enabling fast FPU save and restore... done.

[ 24.593203] Enabling unmasked SIMD FPU exception support... done.

[ 24.593222] Initializing CPU#0

[ 24.593334] PID hash table entries: 4096 (order: 12, 16384 bytes)

[ 24.594633] Console: colour VGA+ 80x25

[ 24.595617] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 24.596964] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 24.649246] Memory: 1028060k/1048512k available (1992k kernel code, 19676k reserved, 893k data, 328k init, 131008k highmem)

[ 24.649265] virtual kernel memory layout:

[ 24.649267] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)

[ 24.649268] pkmap : 0xff800000 - 0xffc00000 (4096 kB)

[ 24.649270] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)

[ 24.649271] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)

[ 24.649273] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)

[ 24.649274] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)

[ 24.649276] .text : 0xc0100000 - 0xc02f2264 (1992 kB)

[ 24.649280] Checking if this processor honours the WP bit even in supervisor mode... Ok.

[ 24.729300] Calibrating delay using timer specific routine.. 3588.89 BogoMIPS (lpj=7177784)

[ 24.729382] Security Framework v1.0.0 initialized

[ 24.729400] SELinux: Disabled at boot.

[ 24.729431] Mount-cache hash table entries: 512

[ 24.729724] CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000

[ 24.729745] CPU: Trace cache: 12K uops, L1 D cache: 8K

[ 24.729749] CPU: L2 cache: 256K

[ 24.729753] CPU: Hyper-Threading is disabled

[ 24.729757] CPU: After all inits, caps: 3febf9ff 00000000 00000000 00003080 00000000 00000000 00000000

[ 24.729777] Compat vDSO mapped to ffffe000.

[ 24.729784] Remapping vsyscall page to ffffe000

[ 24.729806] Checking 'hlt' instruction... OK.

[ 24.745497] SMP alternatives: switching to UP code

[ 24.745876] Freeing SMP alternatives: 11k freed

[ 24.746260] Early unpacking initramfs... done

[ 25.240802] ACPI: Core revision 20060707

[ 25.242534] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.

[ 25.244716] ACPI: setting ELCR to 0200 (from 1820)

[ 25.247072] CPU0: Intel® Pentium® 4 CPU 1.80GHz stepping 02

[ 25.247082] SMP motherboard not detected.

[ 25.247086] Local APIC not detected. Using dummy APIC emulation.

[ 25.247154] Brought up 1 CPUs

[ 25.247592] Booting paravirtualized kernel on bare hardware

[ 25.247733] Time: 19:28:24 Date: 04/02/107

[ 25.247789] NET: Registered protocol family 16

[ 25.247993] EISA bus registered

[ 25.248005] ACPI: bus type pci registered

[ 25.251823] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=2

[ 25.251827] PCI: Using configuration type 1

[ 25.251829] Setting up standard PCI resources

[ 25.271156] ACPI: Interpreter enabled

[ 25.271165] ACPI: Using PIC for interrupt routing

[ 25.271934] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 25.271944] PCI: Probing PCI hardware (bus 00)

[ 25.273163] Enabling SiS 96x SMBus.

[ 25.274197] Boot video device is 0000:01:00.0

[ 25.274284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 25.282427] ACPI: Power Resource [uRP1] (off)

[ 25.282548] ACPI: Power Resource [uRP2] (off)

[ 25.282661] ACPI: Power Resource [FDDP] (off)

[ 25.282786] ACPI: Power Resource [LPTP] (off)

[ 25.284543] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)

[ 25.284931] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.

[ 25.285413] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)

[ 25.285798] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *12 14 15)

[ 25.286180] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)

[ 25.286563] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 *12 14 15)

[ 25.286936] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)

[ 25.287312] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 *12 14 15)

[ 25.287609] Linux Plug and Play Support v0.97 © Adam Belay

[ 25.287632] pnp: PnP ACPI init

[ 25.294102] pnp: PnP ACPI: found 12 devices

[ 25.294113] PnPBIOS: Disabled by ACPI PNP

[ 25.294234] PCI: Using ACPI for IRQ routing

[ 25.294241] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

[ 25.318962] NET: Registered protocol family 8

[ 25.318966] NET: Registered protocol family 20

[ 25.319697] PCI: Bridge: 0000:00:01.0

[ 25.319702] IO window: disabled.

[ 25.319711] MEM window: ddd00000-dfefffff

[ 25.319718] PREFETCH window: cda00000-ddbfffff

[ 25.319786] NET: Registered protocol family 2

[ 25.357256] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 25.357623] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 25.359351] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 25.360304] TCP: Hash tables configured (established 131072 bind 65536)

[ 25.360314] TCP reno registered

[ 25.369407] checking if image is initramfs... it is

[ 26.293042] Freeing initrd memory: 6989k freed

[ 26.293739] audit: initializing netlink socket (disabled)

[ 26.293763] audit(1178134104.884:1): initialized

[ 26.293910] highmem bounce pool size: 64 pages

[ 26.294063] VFS: Disk quotas dquot_6.5.1

[ 26.294101] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 26.294196] io scheduler noop registered

[ 26.294202] io scheduler anticipatory registered

[ 26.294206] io scheduler deadline registered

[ 26.294222] io scheduler cfq registered (default)

[ 26.294696] isapnp: Scanning for PnP cards...

[ 26.648958] isapnp: No Plug & Play device found

[ 26.747629] Real Time Clock Driver v1.12ac

[ 26.747718] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[ 26.747908] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 26.748447] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 26.750349] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 26.751115] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 26.751787] mice: PS/2 mouse device common for all mice

[ 26.752891] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[ 26.753394] input: Macintosh mouse button emulation as /class/input/input0

[ 26.753465] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

[ 26.753473] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

[ 26.753844] PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1

[ 26.753849] PNP: PS/2 controller doesn't have AUX irq; using default 12

[ 26.757694] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 26.757961] EISA: Probing bus 0 at eisa.0

[ 26.758012] EISA: Detected 0 cards.

[ 26.788229] TCP cubic registered

[ 26.788251] NET: Registered protocol family 1

[ 26.788298] Using IPI No-Shortcut mode

[ 26.788521] ACPI: (supports S0 S1 S4 S5)

[ 26.788595] Magic number: 7:85:495

[ 26.788704] Time: tsc clocksource has been installed.

[ 26.789507] Freeing unused kernel memory: 328k freed

[ 28.315745] Capability LSM initialized

[ 29.570527] SCSI subsystem initialized

[ 29.580205] libata version 2.20 loaded.

[ 29.586136] pata_sis 0000:00:02.5: version 0.5.1

[ 29.586302] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff00 irq 14

[ 29.586353] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15

[ 29.586375] scsi0 : pata_sis

[ 29.628779] usbcore: registered new interface driver usbfs

[ 29.628824] usbcore: registered new interface driver hub

[ 29.628867] usbcore: registered new device driver usb

[ 29.630411] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver

[ 29.689916] sis900.c: v1.08.10 Apr. 2 2006

[ 29.830821] Floppy drive(s): fd0 is 1.44M

[ 29.921315] FDC 0 is a post-1991 82077

[ 30.080858] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360

[ 30.080867] ata1.00: ATA-5: WDC WD400JB-00ENA0, 05.03E05, max UDMA/100

[ 30.080871] ata1.00: 78165360 sectors, multi 16: LBA

[ 30.080875] ata1.01: ATAPI, max UDMA/33

[ 30.088894] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360

[ 30.088898] ata1.00: configured for UDMA/100

[ 60.079046] ata1.01: qc timeout (cmd 0xef)

[ 60.079058] ata1.01: failed to set xfermode (err_mask=0x4)

[ 60.079067] ata1: failed to recover some devices, retrying in 5 secs

[ 65.578566] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360

[ 65.586541] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360

[ 65.586546] ata1.00: configured for UDMA/100

[ 95.576707] ata1.01: qc timeout (cmd 0xef)

[ 95.576719] ata1.01: failed to set xfermode (err_mask=0x4)

[ 95.576731] ata1.01: limiting speed to UDMA/33:PIO3

[ 95.576734] ata1: failed to recover some devices, retrying in 5 secs

[ 101.076175] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360

[ 101.084176] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360

[ 101.084181] ata1.00: configured for UDMA/100

[ 131.074373] ata1.01: qc timeout (cmd 0xef)

[ 131.074383] ata1.01: failed to set xfermode (err_mask=0x4)

[ 131.074391] ata1.01: disabled

[ 131.074396] ata1: failed to recover some devices, retrying in 5 secs

[ 136.076926] ata1.00: failed to set xfermode (err_mask=0x40)

[ 136.076936] ata1: failed to recover some devices, retrying in 5 secs

[ 141.412471] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360

[ 141.420423] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360

[ 141.420428] ata1.00: configured for UDMA/100

[ 141.420450] scsi1 : pata_sis

[ 141.747520] ata2.00: ATAPI, max UDMA/66

[ 141.767060] ata2.01: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168

[ 141.767065] ata2.01: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100

[ 141.767069] ata2.01: 488397168 sectors, multi 16: LBA48

[ 141.931468] ata2.00: configured for UDMA/66

[ 141.939565] ata2.01: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168

[ 141.939570] ata2.01: configured for UDMA/100

[ 141.939822] scsi 0:0:0:0: Direct-Access ATA WDC WD400JB-00EN 05.0 PQ: 0 ANSI: 5

[ 141.941722] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7173A 1-01 PQ: 0 ANSI: 5

[ 141.942468] scsi 1:0:1:0: Direct-Access ATA WDC WD2500JB-00R 20.0 PQ: 0 ANSI: 5

[ 141.954776] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11

[ 141.954785] PCI: setting IRQ 11 as level-triggered

[ 141.954790] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11

[ 141.954818] ohci_hcd 0000:00:03.0: OHCI Host Controller

[ 141.955527] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1

[ 141.955561] ohci_hcd 0000:00:03.0: irq 11, io mem 0xdfffd000

[ 141.994887] SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)

[ 141.995917] sda: Write Protect is off

[ 141.995924] sda: Mode Sense: 00 3a 00 00

[ 141.996010] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 141.996137] SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)

[ 141.996154] sda: Write Protect is off

[ 141.996158] sda: Mode Sense: 00 3a 00 00

[ 141.996186] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 141.996191] sda:<6>usb usb1: configuration #1 chosen from 1 choice

[ 142.013461] hub 1-0:1.0: USB hub found

[ 142.013481] hub 1-0:1.0: 2 ports detected

[ 142.026023] sda1 sda2 < sda5 sda6 >

[ 142.040388] sd 0:0:0:0: Attached scsi disk sda

[ 142.041636] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)

[ 142.042274] sdb: Write Protect is off

[ 142.042278] sdb: Mode Sense: 00 3a 00 00

[ 142.043625] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 142.044721] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)

[ 142.044737] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

[ 142.044743] Uniform CD-ROM driver Revision: 3.20

[ 142.045156] sr 1:0:0:0: Attached scsi CD-ROM sr0

[ 142.045205] sdb: Write Protect is off

[ 142.045209] sdb: Mode Sense: 00 3a 00 00

[ 142.045262] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 142.045269] sdb: sdb1

[ 142.051253] sd 1:0:1:0: Attached scsi disk sdb

[ 142.058515] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 142.058551] sr 1:0:0:0: Attached scsi generic sg1 type 5

[ 142.058585] sd 1:0:1:0: Attached scsi generic sg2 type 0

[ 142.115929] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 12

[ 142.115938] PCI: setting IRQ 12 as level-triggered

[ 142.115944] ACPI: PCI Interrupt 0000:00:03.1 -> Link [LNKF] -> GSI 12 (level, low) -> IRQ 12

[ 142.115977] ohci_hcd 0000:00:03.1: OHCI Host Controller

[ 142.116045] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2

[ 142.116074] ohci_hcd 0000:00:03.1: irq 12, io mem 0xdfffe000

[ 142.173313] usb usb2: configuration #1 chosen from 1 choice

[ 142.173372] hub 2-0:1.0: USB hub found

[ 142.173391] hub 2-0:1.0: 2 ports detected

[ 142.275771] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5

[ 142.275780] PCI: setting IRQ 5 as level-triggered

[ 142.275785] ACPI: PCI Interrupt 0000:00:03.2[C] -> Link [LNKG] -> GSI 5 (level, low) -> IRQ 5

[ 142.275819] ohci_hcd 0000:00:03.2: OHCI Host Controller

[ 142.275891] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3

[ 142.275918] ohci_hcd 0000:00:03.2: irq 5, io mem 0xdffff000

[ 142.333269] usb usb3: configuration #1 chosen from 1 choice

[ 142.333329] hub 3-0:1.0: USB hub found

[ 142.333348] hub 3-0:1.0: 2 ports detected

[ 142.401792] Attempting manual resume

[ 142.401800] swsusp: Resume From Partition 8:6

[ 142.401803] PM: Checking swsusp image.

[ 142.402085] PM: Resume from disk failed.

[ 142.419187] usb 1-1: new low speed USB device using ohci_hcd and address 2

[ 142.435847] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 12

[ 142.435857] ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 12 (level, low) -> IRQ 12

[ 142.435887] ehci_hcd 0000:00:03.3: EHCI Host Controller

[ 142.435968] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus numbe

[k_antoni]

> [ 95.576734] ata1: failed to recover some devices, retrying in 5 secs
[ 101.076175] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360
[ 101.084176] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360
[ 101.084181] ata1.00: configured for UDMA/100
[ 131.074373] ata1.01: qc timeout (cmd 0xef)
[ 131.074383] ata1.01: failed to set xfermode (err_mask=0x4)
[ 131.074391] ata1.01: disabled
[ 131.074396] ata1: failed to recover some devices, retrying in 5 secs
[ 136.076926] ata1.00: failed to set xfermode (err_mask=0x40)
[ 136.076936] ata1: failed to recover some devices, retrying in 5 secs
[ 141.412471] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360
[ 141.420423] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360 

 

γιατί αυτά?

[nigiana]

Αν ήξερα θα το είχα φτίαξει!!!

Δεν καταλαβαίνω και πολλά,αυτα βγάζει κατευθείαν(σε χρόνο μηδέν)

[The_Mentor]

[ 30.088898] ata1.00: configured for UDMA/100

[ 60.079046] ata1.01: qc timeout (cmd 0xef)

 

Μάλλον απο εδώ ξεκινάει η φάση αφού φαίνονται και οι χρόνοι από το 30 sec πάει καπάκι στο 60.

Το κάνει την στιγμή που προσπάθει να σετάρει τους κοντρόλερ του δίσκου σε UDMA/100.

Μπές στο BIOS και δες καμιά περίεργη ρύθμιση στους δίσκους. Ενδεικτικά καντους ΡΙΟ και δοκίμασε να δεις αν μπουτάρει κανονικά.

Μετά πές μας τι έκανες...

[nigiana]

έβαλα τους δίσκος σε manual primary master κ.τ.λ καi ΡΙΟ on.Αυτό παίρνει τιμες αν και δεν βλέπω διαφορα.Στο κόλημα που τρώει, μαλλον ο σκληρος δεν πρεπει να δουλευει(αφου δεν κάνει θορυβο)ενω το φως μπροστά(μαλλον της cpu)αναβει όταν ξεκολάει.

Εχω την εντύπωση ότι κάτι τέτοιο γινόταν και παλιοτερα στα windows αλλα δεν ηταν τόσο εντονο.

[The_Mentor]

για δοκίμασε να ξηλώσεις τον ένα δίσκο και άσε τον άλλο επάνω. Τί κάνει? Πάλι κάνει παπαριές? Υπάρχει άλλος δίσκος που να δοκιμάσεις πάνω στην μητρική ώστε να ξεκαθαρίσεις πως τα κόλπα που κάνει δεν οφείλονται εκεί?

[nigiana]

Aν υπάρχει πρόβλημα δίσκου τότε είναι αυτος που χρησιμοποιώ,γιατι ο άλλος έχει μόνο data(τον ξήλωσα και συνεχίζει τα ίδια).Λες να είναι όντως πρόβλημα δίσκου;

[The_Mentor]

Ποτέ δεν ξέρεις τι γίνεται...

Βάλε στη θέση του έναν άλλον και δες τι κάνει. Αν το ξανακάνει και σε εκείνον τότε δεν φατίνε οι δίσκοι αλλά η μητρική (controller) αν όχι τότε παίζει ο δίσκος να ετοιμάζεται να κελαηδίσει....

Με αυτόν τον τρόπο ξέρεις ακριβώς τι παίζει.

[nigiana]

Ποτέ δεν ξέρεις τι γίνεται...

Βάλε στη θέση του έναν άλλον και δες τι κάνει. Αν το ξανακάνει και σε εκείνον τότε δεν φατίνε οι δίσκοι αλλά η μητρική (controller) αν όχι τότε παίζει ο δίσκος να ετοιμάζεται να κελαηδίσει....

Με αυτόν τον τρόπο ξέρεις ακριβώς τι παίζει.

ξερεις καμια καλη διευθυνση να μαθω τίποτα για το bios και να ελέγξω τις ρυθμίσεις;

[nske]

Δε νομίζω ότι έχει να κάνει με το bios ή με πρόβλημα hardware, μάλλον έχει σχέση με τον driver του controller ή την libata. Ψάχνοντας στο google βρήκα αρκετές αναφορές για ίδια συμπτώματα σε Intel και Silicon Image controllers. Σε όλες τις αναφορές το πρόβλημα εμφανίστηκε ξαφνικά κάποια στιγμή μετά την έκδοση 2.6.19.2, αν κάνεις downgrade σε έκδοση kernel μικρότερη πρέπει να είσαι εντάξει. Εκτός αν είναι κάτι που φτιάξανε στον 2.6.21, δοκίμασε και την τελευταία έκδοση kernel πρώτα. Μία άλλη πιθανή λύση είναι, αν η μητρική σου έχει πρόσθετο SATA controller διαφορετικού κατασκευαστή (π.χ. της Marvell) να συνδέσεις τους δίσκους εκεί.