P6BAT-A+ ή P6BXT-A+ ?

[washcloud]

...όσο για την RAM φίλε Georgeman...Στο' πα και παλιότερα...:Είναι δυστυχώς θέμα της συγκεκριμένης RAM...(δλδ της μητρικής είναι,απλά δεν νομίζω ότι υπάρχει τρόπος να την διαβάσει "σωστά"....ever.)...Άμα βρεις καμμία Diamond 256άρα και δεν λυπηθείς τα χρήματα,παρ' την,στο λέω εγγυημένα (δλδ αυτό που μπορώ εγώ να "εγγυηθώ" είναι ότι αυτήν που έχω εγώ την βλέπει ολόκληρη...) Του αξίζει του...γεράκου μια αναβάθμιση

[Silent Arrow]

To exw dokimasei egw silent arrow.. authn thn stigmh kiola to exw mprosta mou

To mono kako einai oti den ypostirizetai to S.M.A.R.T mesw tou PCI-IDE-Sata (toulaxiston oxi sthn dikh mou karta apo oso dokimasa..)

apo taxythtes.. Transfer rate (metrhmeno me to HDtune 2.53)

max 56,5MB/sec se ena 40gb WD

oti erwthsh exeis pes.. epishs mono se XP katafera na to doulepsw swsta (dhl. na bootarei apo kei)

 

Οπα addicted χτυπησες φλεβα χρυσου.....

 

Πως καταφερες και bootαρες τα XP απο PCI IDE Controller???? Εβαλες να bootαρει απο SCSI και στον primary και secondary controller τους απενεργοποιησεις (εβαλες δηλαδη none)? Δηλαδη ολοι οι σκληροι, DVD-ROM κλπ πανω στον PCI controller?

 

Εμενα δουλευει μονο στο πρωτο bootαρισμα μετα απο format (Το PC πεταει τοτε, νομιζω οτι χρησιμοιω PIV 2GHz). Αν κλεισω και ξανανοιξω το PC κολλαει . Δεν εχω κανει BIOS Update καθολου, μαλλον φταιει αυτο. Τον Αυγουστο που θα εχω το PC θα δοκιμασω......

 

Το συστημα μου :

PIII 450MHz

320 RAM

40->32gb Seagate στον primary controller (33MHz)

CD-RW στον secondary controller (δεν μπορεις να αντιγραψεις αν βαλεις το CD-RW πανω στον PCI IDE controller)

60 gb Maxtor 133MHz Adaptec PCI IDE Controller (και εγω 56MB/sec στο HDTune:twisted: )

DVD-ROM πανω στον PCI controller

[amadeus13]

εγώ "τρωγόμουνα" για το αν θα τον βλέπει ή όχι-αν και το πίστευα-και φυσικά δεν αγοράζεις 1 δίσκο 200Gb για να κάνεις...πειράματα!

 

και βεβαια τον βλεπει.. τουλαχιστον εμενα ετσι μου δειχνει...μπηκα στο control panel>administraive tools>computer management και μου δειχνει τα δυο partitions: το ενα 39GB που εχει κ τα XP και το αλλο 147GB που το εχω για data

 

..Όσο για το θέμα του "δια μαγείας"...Πρέπει να έχεις το Service Pack 2 επάνω,ε; (..Διότι "μαγικά" δεν γίνονται με τα pc... )

(έχει να κάνει με την αναγνώριση του 48Bit LBA δίσκου που έβαλες επάνω...)

 

ναι βασικα του βαλα ΧP english με SP2...οποτε μαλλον αυτο παιζει..

 

προς το παρον παντως τον τρεχω στα 450MHz και χωρις να εχω κανει optimise settings στο ΒΙΟS και ειμαι πολυ ευχαριστημενος.. Θα δοκιμασω και τα κολπα με τα Host clock και θα σας πω...

[amadeus13]

ξεχασα να σημειωσω οτι αρχικα οταν εβαζα τον 200αρη μονο του δεν τον εβλεπε καν ουτε στο BIOS, ουτε οταν πηγαινα να κανω setup τα ΧΡ( δλδ στην επιλογη δισκου..μπλε οθονες...κλπ...)

τον εβλεπε ομως οταν εβαζα κ τον 2GB. Οποτε εβαλα τον 2GB slave και τον 200 GB master..

αρχικα δοκιμασα να κανω setup κατευθειαν στον 200αρη αλλα μετα το restart και αφου αφαιρεσα τον 2Gb δεν τον εβλεπε.. παλι...

οποτε μετα απο αρκετες προσπαθειες εκανα εγκατασταση στον 2Gb και μεσα απο τα windows επελεξα απο το cd setup windows..

αφου εκανα εγκατασταση κα στον 200αρη μετα αφαιρεσα τον 2gb k ευτυχως επαιξε... ελπιζω να μην σας μπερδεψα πολυ...

[grigas]

Ρε το καταλαβαίνετε ότι με έχετε μπριζώσει να πάω να αγοράσω IDE σκληρό να ξαναστήσω το παλιό μου PCάκι??????????

 

Όσοι ενδιαφέρεστε για βελτίωση της ταχύτητας της μνήμης σας στην εν λόγω μητρική διαβάστε με προσοχή τα παρακάτω κ κατεβάστε το attachment. Η ΝΤ έκδοση δουλεύει δοκιμασμένα σε overclocked στα 504 CPU με 133άρες μνήμες και WinXP SP1 (όταν βγήκε το SP2 το είχα καταργήσει το PC αυτό)

 

Memory Interleave Enabler

for VIA Chipsets:

Technical notes

 

Copyright © 2001, George E. Breese. All Rights Reserved.

 

Version 0.12 4/2/01

 

Important: This product CAN DAMAGE A COMPUTER.

 

License: This software is licensed, not sold. The author of this product has granted you a license to use this product, subject to the following conditions. By possessing, using, or attempting to use this product, you assume all liability for its use. You agree never to take legal action, civil or criminal, against its author for any reason. You may redistribute this product in its original form only. You may not charge money for distribution of the product, unless all such charges are remitted to the author immediately upon payment. The author retains ownership of all intellectual properties embodied in this product.

Revision History

Version 0.12 April 2, 2001

 

This is the current version. This version is identical to v0.11 except that it enables three fewer features. These features did not seem to affect performance on a Pro133, but were possibly causing Pro133 motherboards to be less stable.

 

Support for KT133 and MVP4 chipsets is based on documentation only, and is untested. KX133 support was successful on a Biostar M7MKE, and resulted in a 32% improvement in SiSoft Sandra memory benchmark numbers.

 

NOTE: This version of the driver does not detect 16-megabit RAM, and always enables 4-way interleave in any SDRAM. VIA chipsets only support 2-way interleave on 16-megabit RAM modules.

Version 0.11 March 31, 2001

 

This version contained the first support for MVP3, MVP4, KX133, and KT133 chipsets. It detects and avoids interleaving "Fast Page" and EDO RAM, for which VIA has no support.

 

Support for KT133 and MVP4 chipsets is based on documentation only, and is untested.

 

This version of the driver had a potential bug. It set DRAM flags that may have caused memory to be less stable on Apollo Pro Plus and Pro133 series motherboards.

 

* CPU DRAM prefetch depth: was set to 4-level

* CPU DRAM read while snoop: was enabled

* CPU DRAM post-write depth: was set to 4-level

 

Version 0.1 February 28, 2001

 

This version was the initial release. It supported the VIA Apollo Pro133 and Pro133A chipsets only. It had the following known bugs:

 

* It failed to enable the "read around write" bit of the chipset, with the result that some users saw no improvement. Users could enable "read around write" in their BIOS if needed.

* The documentation showed Sandra benchmark numbers that showed improvement on a ChainTech 6ATA2 motherboard, but the numbers were taken from a beta copy of the driver that enabled "read around write". The 6ATA2 board did improve when using the official v0.1 release, as follows:

Before: 124 ALU / 128 FP

After: 188 ALU / 201 FP

 

Technical Information

 

The Apollo Pro series need more than just memory interleaving in order to maximize their memory performance. The following register settings are applied to all Apollo Pro-series chips by the driver:

 

* In-Order Queue depth: set to 4-level

* Read-around-write: Enabled

 

In addition, all of the supported chipsets receive the following settings.

 

* Bank active page control: set to "any bank"

* Interleave: Set to "4-way" for any SDRAM or DDR-SDRAM bank of memory, based on the memory-configuration register

 

The driver reads PCI Device #0 and checks it for vendor ID and model ID before proceeding. The vendor ID is 0x1106 for VIA, and the model IDs 0x0597, 0x0598, 0x0691, 0x0391, and 0x0305 are currently supported.

 

This driver only changes the relevant bits of each register.

Contact Information

 

If you wish to offer feedback on this driver, send email to [email protected] . Please note that I do not check this mailbox frequently, and I do not answer questions about installation or use of this driver.

 

Memory Interleave Enabler

for VIA Chipsets

Questions and Answers

 

Copyright © 2001, George E. Breese. All Rights Reserved.

 

Version 0.12 4/2/01

Important notes:

 

This product CAN DAMAGE A COMPUTER. Use it carefully and at your own risk.

 

If you have installed a previous version of this driver, uninstall it before installing this version.

 

License: This software is licensed, not sold. The author of this product has granted you a license to use this product, subject to the following conditions. By possessing, using, or attempting to use this product, you assume all liability for its use. You agree never to take legal action, civil or criminal, against its author for any reason. You may redistribute this product in its original form only. You may not charge money for distribution of the product, unless all such charges are remitted to the author immediately upon payment. The author retains ownership of all intellectual properties embodied in this product.

What is it?

 

This is a driver for Windows 9X, NT, and 200X. It will increase the speed of certain computers.

 

When installed on a computer whose motherboard contains certain VIA chipsets, this driver will reprogram the VIA chipset in order to maximize the speed of the computer's RAM.

How does it work?

 

This driver takes control of the main VIA-branded chip on the computers' motherboard, which is the chip responsible for connecting the CPU to the RAM and ROM and PCI and AGP and so forth. This driver adjusts the way that the VIA chip communicates with the computer's RAM.

Do I need it?

 

If your computer has one of the following VIA chips on its motherboard, you might need this driver. In all other cases, you do not need this driver.

 

* MVP3 or MVP3G, labeled "VT82C598"

* MVP4, labeled "VT82C501"

* Apollo Pro, Pro Plus, Pro133, Pro133A; labeled "VT82C691" or "VT82C693" or "VT82C693A" or "VT82C694X"

* KX133, labeled "VT8371"

* KT133, labeled "VT8363"

 

If you own a computer whose motherboard contains one of the chipsets, then you might need it. To confirm that your computer has the correct chipset, try any of the following.

 

* Open the computer and examine the motherboard. A large, flat, square chip near the CPU will have the VIA logo and the part number. This chip may be under a heat sink and may be difficult or impossible to read, in which case you will have to try a different method.

* Download Sisoft Sandra. Examine its Mainboard Information. The 2001 edition of Sandra should identify the chipset clearly.

* Use a PCI identification utility to obtain a list of the PCI devices in the computer. The correct chip has vendor number 0x1106 and ID number 0597, 0598, 0691, 0391, or 0305.

* Refer to your motherboard manual.

 

Your computer might already have interleave enabled, in which case you will not need this driver. You can use Sisoft Sandra 2001 to check the computer's current use of memory interleaving. Use the Mainboard Information screen. Scroll down to "Logical/Chipset Memory Banks". Look at the "Bank Interleave" setting. If the setting is "2-way" or "4-way", then you do not need this driver.

Why do I need it?

 

ViaTech (http://www.viatech.com, or http://www.via.com.tw) has included a "memory interleave" feature in their chipsets since 1997. Many motherboard makers chose not to enable it, however. This feature can drastically improve the speed of memory access, but only if it is switched on.

I only have one memory module. Can I use interleaving?

 

Generally, yes. In this kind of interleaving, the chipset can remember the location of up to four recently-used "pages" of memory on the module and can return to them instantly. Depending on the chipset, it can also remember the last four pages per module, for a total of sixteen pages. When the CPU needs to access these pages, the VIA chipset can access them quickly without having to calculate their location.

 

The amount of interleaving depends on the size and type of the memory chips on the computer's RAM modules. SDRAM is required. If the chips on the modules store 16 megabits each, the VIA chipsets can achieve two-way interleaving; if the chips are 64 megabits, four-way interleaving is possible.

 

NOTE: This version of the driver does not detect 16-megabit RAM, and it always enables 4-way interleave in any SDRAM.

I have Fast Page or EDO RAM. Can I use this?

 

No. This particular VIA feature is limited to SDRAM.

How do I install it?

 

You should have received this in a .ZIP compressed file. Extract the entire .ZIP file to a suitable location.

 

If your computer is running Windows 95, 98, 98 Second Edition, or ME, then run SETUP_9X.BAT .

 

If your computer is running Windows NT 4.0 or 2000, then run SETUP_NT.BAT.

 

After running the appropriate .BAT file, restart the computer.

How do I know that it is working?

 

One way to determine its effect is by performing the Memory Benchmark in Sisoft Sandra. The resulting numbers should be significantly higher than those without the driver.

 

I recorded the following results from Sisoft Sandra when testing the driver on specific computers. Your results may vary. Higher numbers are better. All numbers are in units of megabytes per second.

Motherboard Without driver With driver

Apollo Pro133 (ChainTech 6ATA2) ALU 124, FP 128 ALU 223, FP 239

KX133 (Biostar M7MKE) ALU 352, FP 376 ALU 413, FP 503

MVP3G (Tyan Trinity 400) ALU 110, FP 114 ALU 133, FP 139

What could go wrong with this driver?

 

Just about anything can go wrong. Your computer may display a "blue screen of death". The computer may become unstable. This driver may not help your computer at all.

 

This driver helped my computer. I am sharing it with you in the hope that it will help your computer. You must decide whether this driver helped your computer.

How do I uninstall it?

 

The driver can be uninstalled from the Add / Remove Programs section of Control Panel. The driver will be removed immediately, but the memory interleave will be enabled until the system is restarted.

What else can I do to improve memory performance?

 

NOTE: All changes to a computer carry a risk of damage. Try these carefully and at your own risk.

 

In the computer's BIOS setup screens, you can usually find an "Advanced Chipset Setup" screen. In this screen are several chipset-specific settings.

 

If you do not understand the terminology in this section, please study RAM and CAS issues on the Internet. If you are not comfortable making these adjustments, do not try them.

 

CAS Latency adjustments should be made to match the RAM in the computer.

 

* CAS Latency is measured in CPU clock cycles, and a lower number is faster.

* Choices for CAS Latency are some or all of the following values: "1", "2", "2.5", or "3".

* Every RAM module has a limit determined at the factory. The answer is usually marked on the module's label. It is also stored inside a "SPD" chip, a small 6mm chip mounted on a corner of the memory module.

* If a mix of CAS Latency "2" and "3" RAM is in the PC, do not set the BIOS to "2".

* Most, but not all, PC133 CL3 RAM can be used as CL2 RAM if the CPU's Front Side Bus (FSB) is 100MHz.

* The preferred choice is to have the BIOS use the SPD chip on the RAM module to determine the answer. If this option exists, it should be used.

 

Apollo Pro133, KX133, and KT133 chipsets can have their clock speed adjusted.

 

* On the Apollo Pro133, it may be set to 33MHz more or less than the CPU speed. If your RAM happens to be rated for 33MHz more than your CPU's FSB, you can set the RAM clock speed to "HCLK+33".

* Some BIOSes have a choice of using the SPD chip (a small 6mm chip mounted on a corner of the memory module) to determine the answer. If this option exists, it should be used.

* On the KX133 and KT133, the RAM speed can be set up to 133MHz if the RAM can handle it.

 

Systems with AMI or Award BIOS usually have generic DRAM timing adjustments. Typical choices are "7.5ns SDRAM", "10ns SDRAM", "Normal", "Fast", and "Turbo". Setting this value to "Fast" or "Turbo" can help. But, please note that some memory will not work correctly at faster-than-normal speed.

How much memory does this driver use?

 

This driver uses almost no memory at all. Its only job is to reprogram the chipset one time at startup.

 

Windows drivers are special programs. They have a special section that only occupies memory while the driver is starting. Nearly all of this driver's program code is located in this special section.

How did you make this driver?

 

I used notes from all over the Internet. I knew there was something not-quite-right with my computer, and after scouring the Internet for an answer, I stumbled on a few discussions of memory interleaving. People were discussing how they could use H.Oda's WPCREDIT to tweak the Pro133 chipset for better operation.

 

H.Oda once produced a driver called WPRESET that could reprogram the chipset at startup. WPRESET was designed to accept a list of tweaks and would perform them every time the computer was restarted. With all respect to H.Oda, I found bugs that prevented me from configuring his program at all. He has since discontinued support for WPRESET.

 

Eventually I grew tired of using WPCREDIT to manually tweak my computer. I decided to create a driver to do it for me. I happen to be a computer programmer, and my job description includes creating Windows drivers. I wrote this driver from scratch in my spare time. I built a common set of C++ code to perform the reprogramming of the chipset. I then created two sets of "wrapper" code, one to create a VxD and one for a NT kernel driver.

 

For the record, this driver contains none of the code of WPCREDIT or WPRESET.

 

Before developing this driver, I used WPCREDIT to confirm which registers I wanted to change. WPCREDIT would routinely crash my computer, and so did this driver at first. I have found an ugly hack that solves the problem, and that is probably patentable. (Microsoft and IBM have patented the use of obscure Intel CPU instructions, so why can't I?)

 

This driver was made using a mix of assembly-language and C++ code. To compile it, I use Microsoft Visual C++ 6.0 and Microsoft's free Windows 2000/ME DDK. My Windows 9X VxD is based upon Microsoft's generic sample VxD, and my NT kernel driver is actually an AppWizard-generated DLL file with some carefully-chosen compiler and linker options.

Will you give us the source code?

 

I do not wish to share the source code at this time. It is not formatted cleanly, and I may elect to use it in a commercial product later.

How do I contact you?

 

If you wish to offer feedback on this driver, send email to [email protected] . Please note that I do not check this mailbox frequently, and I do not answer questions about installation or use of this driver.

memoryenable.zip

[addicted]

Οπα addicted χτυπησες φλεβα χρυσου.....

 

Πως καταφερες και bootαρες τα XP απο PCI IDE Controller???? Εβαλες να bootαρει απο SCSI και στον primary και secondary controller τους απενεργοποιησεις (εβαλες δηλαδη none)? Δηλαδη ολοι οι σκληροι, DVD-ROM κλπ πανω στον PCI controller?

 

Εμενα δουλευει μονο στο πρωτο bootαρισμα μετα απο format (Το PC πεταει τοτε, νομιζω οτι χρησιμοιω PIV 2GHz). Αν κλεισω και ξανανοιξω το PC κολλαει . Δεν εχω κανει BIOS Update καθολου, μαλλον φταιει αυτο. Τον Αυγουστο που θα εχω το PC θα δοκιμασω......

 

Το συστημα μου :

PIII 450MHz

320 RAM

40->32gb Seagate στον primary controller (33MHz)

CD-RW στον secondary controller (δεν μπορεις να αντιγραψεις αν βαλεις το CD-RW πανω στον PCI IDE controller)

60 gb Maxtor 133MHz Adaptec PCI IDE Controller (και εγω 56MB/sec στο HDTune:twisted: )

DVD-ROM πανω στον PCI controller

 

P3450@600

196 RAM

80gb WD ston primary master

CD-R ston secondary master

DVD ston secondary Slave

40gb WD ston pci ata sata controller (exei ena kanali gia Ata kai 2 gia sata)

o 40 einai sto master ths kalwdiotainias

panta milame gia p6bat-a+ rev 2.0

bios einai san first boot device sto ScSi (den 8imamai thn seira, giati sou to grafw apo auton ton ypologisth)

kai sthn erwthshs sou sxetika me tous onboared controllers einai sto On kai oi 2 kalhmeeeraaa

[addicted]

oriste kai ena info apo thn agaphth mas sandra amesws meta thn egatastash tou driver pou eipw8hke

se mena den ekane tpt.. logw ram pisteyw..

sthn telikh dvd den paizei oute me auto, opote.... koukouroukou... 8a paikseis pou 8a paei atimo p3

epishs na anaferw oti to pcaki einai se kouti pleon kai oxi panw se novopan opws palia, kai exei eksoplistei me 2 ry8mistes gia tous anemhsthres (CPU & PSU)

epishs egine kai mod sto PSU afou pleon to anemhsthraki tou den pernei apo kei mesa reyma.. evala 3kokkina ledakia pou ta eixa apo palies mods..

Ante na mpoune kai ta kalwdiakia tou symazemena, na kleisei kai auto to kapaki.. (alh8eia pou einai???)...

seira exei ena AB-BH6 me PII 350 @ 3,5x133=465 me 64+32RAM me Win2000 to opoio 8a ginei Lampater... (auto einai kai to computer name tou) xixixi...

 

Parakalw tis apopseis sas sxetika me to ry8mizomeno Fan tou PSu..

an to xalhlwsw teleiws(isa isa na gyrnaei) 8a pa8ei tpt ??

sandra test.txt

[Silent Arrow]

P3450@600

196 RAM

80gb WD ston primary master

CD-R ston secondary master

DVD ston secondary Slave

40gb WD ston pci ata sata controller (exei ena kanali gia Ata kai 2 gia sata)

o 40 einai sto master ths kalwdiotainias

panta milame gia p6bat-a+ rev 2.0

bios einai san first boot device sto ScSi (den 8imamai thn seira, giati sou to grafw apo auton ton ypologisth)

kai sthn erwthshs sou sxetika me tous onboared controllers einai sto On kai oi 2 kalhmeeeraaa

 

Θα με κανεις τωρα να παρατησω τη δουλεια, να επιστρεψω στο σπιτι που βρικειται ο PIII και να ξεκινησω την επιχειρηση να τον κανω tourbo!!!:twisted:

 

Ο Αυγουστος ειναι μακρια δεν κρατιεμαι!!

 

Αληθεια γιατι δεν εβαλες τον 80αρη στον PCI controller? Υποφερει στον primary controller (15MB/sec rate?)

[washcloud]

Θα με κανεις τωρα να παρατησω τη δουλεια, να επιστρεψω στο σπιτι που βρικειται ο PIII και να ξεκινησω την επιχειρηση να τον κανω tourbo!!!:twisted:

 

 

εγώ πάλι που είμαι courier και μόλις πέρασα από το σπίτι πάνω στη δουλειά,για να....τσεκάρω το thread αυτό;!

..Παιδιά...Σα να σφίγγουν οι ζέστες !

[addicted]

Αληθεια γιατι δεν εβαλες τον 80αρη στον PCI controller? Υποφερει στον primary controller (15MB/sec rate?)

 

8a sou akoustei ligo periergo alla....

o pci controller exei ypodoxh gia diko tou HDD led

opote,

evala phra ton pin tou power led kai to evala sto Hdd led tou pci-ata-sata

to led pou eixa gia power einai mple kai tou sklhrou kokkino.. opote otan

yparxei prosvash sto C: (40gb) anavei mple kai otan yparxei se D: (80gb)

anavei to kokkino..

genika den me peirazei toso an 8ysiasw ligo taxythta ston D , dioti to protimw na anavwsvhnoun monaxa otan yparxei activity...

 

p.s to kapaki to vrhka..!!!!!!

[addicted]

wraiaaaaaa....

kai ksafnika kanei ena TSAAAFF h AB-BH6 kai paei....

mamakia mou vevaia, kapou akoumphse kai ekane swma anamesa stis 2 telaiutaies PCI..

evgala mpataria gyrisa jumpers clear cmos ktl...

akomh kai to chipaki tou bios evgala kai ksanaevala..

pataw to power, kai anavei to trofodotiko kai o sklhros...

mexri ekei... anemhsthras CPU den gyrnaei..

sthn o8onh tpt... mayrila mayrh ths aporias...

an exei kaneis to idio mobo kai den to xreiazetai, dexomai prosfores..

apo larisa eimai.

Ftou gmt ti pa8ame...

 

epishs an to afhsw na douleyei etsi 8ermenetai to chipset.. yper8ermenetai dld... sxedon kaika :/

[amadeus13]

amadeus13, εχουμε ΚΑΙ τον ιδιο επεξεργαστη, και εγω πολυ απλα να δωσω αλλη μια ψηφο στην αποψη του washcloud, γιατι τον τρεχω στα 504MHz τον Katmai 450 μου, χωρις ΚΑΝΕΝΑ προβλημα!

 

ρε παιδια ανακαλυψα sto device manager οτι δεν μου εχει αναγνωρίσει μια συσκευη..: PCI Simple Communications controller λεγεται.. μπηκα στο site αλλα δυστυχως δεν εχει κατι σχετικο (για την P6BXT-A+ μιλαμε παντα..) σε driver..

georgeMan μηπως τυχαινει να ξερεις ποιο driver να βαλω? Αλλα αν ξερει k κανεις αλλος ας μου πει..

Εχω ΧΡ SP2..

να σημειωσω οτι σε pci Καρτες εχω βαλει μια καρτα δικτυου και ττην sound blaster AWE τις οποιες αναγνωριζει κανονικα..

[grigas]

αυτό είναι το AMR modem που έχει η μητρική σου. είναι μία μικρή θύρα κάπου ανάμεσα στις PCI. καλού κακού σου ανέβασα τον driver που έχω εγώ.

 

http://rapidshare.com/files/29142164/amrnt.rar

[amadeus13]

Καλησπερα και παλι!

Τις τελευταιες μερες αντιμετωπισα ενα μεγαλο αριθμο απο μπλε οθονες κ μετα απο αρκετο ψαξιμο ανακαλυψα στο event viewer οτι :ACPI BIOS is attempting to write to an illegal IO port address

 

Ειχε κανεις με την ιδια μητρικη παρομοιο σφαλμα 'η ξερει πως να το λυσει?

[washcloud]

den eixa pote(me thn p6bat-a+ )tetoio BSOD ,amadeus13,alla rikse 1 matia edw...http://www.softwaretipsandtricks.com/forum/windows-xp/1674-acpi-errors.html

En oligois,dokimase na apenergopoihseis to ACPI function ap to bios,mpas kai allaksei tipota...('h ksanakane flsh to bios...)