Teirecias Δημοσ. 10 Απριλίου 2007 Μέλος Δημοσ. 10 Απριλίου 2007 Στη διαχείριση συσκευών διαγράφεις τις συσκευές που έχεις στο συγκεκριμένο κανάλι. Μετά διαγράφεις το κανάλι (IDE) που βρίσκονται, (Ελεγκτές IDE ΑΤΑ/ΑΤΑΡΙ) και restart Αδερφι, εννοεις να κανω disable αυτα που σου εχω τσεκαρει και μετα να κανω restart το PC ?
ppetr Δημοσ. 10 Απριλίου 2007 Δημοσ. 10 Απριλίου 2007 Δεξί κλικ και κατάργηση πρώτα τις συσκευές και μετά το κανάλι @zavlakas αυτό δε μου λέει τίποτα, πρέπει να κάνει το τεστ και να πάρει την εικόνα στη σελίδα http://aspi.radified.com/ "ASPI is properly installed and fully operational" EDIT: Δες και εδώ http://www.nero.com/nero6/eng/ASPI_Driver.html
zavlakas Δημοσ. 11 Απριλίου 2007 Δημοσ. 11 Απριλίου 2007 Το error που αναφερεται εδω το προσεξε κανεις σας?? http://www.insomnia.gr/vb3/showpost.php?p=1554386&postcount=28 Γιατι ψαχνεστε με το ASPI και δεν κοιτατε που οφειλεται αυτο?? Γιατι ασχολειστε με το καναλι IDE αφου αναφερεται στο log οτι ειναι ενεργοποιημενο το DMA??? Την εκδοση firmware του recorder την προσεξε κανεις??? Τελος παντων.... Καντε οτι θελετε....
harrys23 Δημοσ. 11 Απριλίου 2007 Δημοσ. 11 Απριλίου 2007 Αδερφια,εδω κι 1,5 χρονο αντεγραφα κανονικα Dual Layer DVDs με το DVD Shrink και το Nero 6.6.0.1.3 (με DVD Recorder NEC ND-3540A) ξαφνικα μου προεκυψε το παρακατω προβλημα: προσπαθησα ν'αντιγραψω ενα αντιγραφο DVD Dual Layer και το Buffer αρχισε ν'αυξανεται μεχρι τα 1,789 MB ωσπου κι ελαβα το ακολουθο μηνυμα: "DVD Shrink encountered an error and cannot continue. Out of Memory Not enough storage is available to process this command." Να ενημερωσω οτι εχω 2GB RAM και βασικα οτι δεν αντιμετωπιζα κανενα προβλημα με τα Dual Layer μεχρι τωρα. Δοκιμασα μεχρι και ν'αλλαξω αντιγραφικο(NEC AD-7173) και στο τελος εκανα ολικο format.... κι ομως ....ΤΙΠΟΤΑ !!! μπας και κανεν' αδερφι εχει καμμια ιδεα ? εχω σαλταρει στην κυριολεξια.... :confused: εγω απλα θα ρωτησω αν το serial που εβαλες στο nero ειναι πειρατικο και γιατι το λεω παλια μου εκανε και εμενα κατι τετοια error διοτι το dvdshrink δουλευει αποκλειστικα στο καψιμο των dvd με το nero κατεβασε την τελευταια εκδοση του nero και βρες ενα γνησιο serial και μετα τα ξαναλεμε. ολα τα παραπανω για τον λογο οτι εχεις παλια εκδοση του nero σκεψου οτι δουλευω με το 7,5,9 και εχουν σταματησει τα error
Teirecias Δημοσ. 11 Απριλίου 2007 Μέλος Δημοσ. 11 Απριλίου 2007 Δεξί κλικ και κατάργηση πρώτα τις συσκευές και μετά το κανάλι @zavlakas αυτό δε μου λέει τίποτα, πρέπει να κάνει το τεστ και να πάρει την εικόνα στη σελίδα http://aspi.radified.com/ "ASPI is properly installed and fully operational" EDIT: Δες και εδώ http://www.nero.com/nero6/eng/ASPI_Driver.html Αδερφι, οπως μπορεις να δεις το check που μου ειπες εδωσε σφαλμα. μηπως μπορεις να με καθοδηγησεις να το διορθωσω ?
ppetr Δημοσ. 11 Απριλίου 2007 Δημοσ. 11 Απριλίου 2007 Λοιπόν, ούτε εγώ έχω ASPI drivers (μου βγάζει Ν/Α) http://www.adaptec.com/en-US/speed/software_pc/aspi/aspichk_exe.htm βέβαια έχω την 7.8.5.0 το nero δίνει αυτό http://www.nero.com/nero6/eng/NEASPIEN.EXE.html αν έπρεπε να βάλω ASPI drivers θα πέρναγα αυτό http://www.adaptec.com/en-US/speed/software_pc/aspi/aspi_471a2_exe.htm
Teirecias Δημοσ. 11 Απριλίου 2007 Μέλος Δημοσ. 11 Απριλίου 2007 Λοιπόν,ούτε εγώ έχω ASPI drivers (μου βγάζει Ν/Α) http://www.adaptec.com/en-US/speed/software_pc/aspi/aspichk_exe.htm βέβαια έχω την 7.8.5.0 το nero δίνει αυτό http://www.nero.com/nero6/eng/NEASPIEN.EXE.html αν έπρεπε να βάλω ASPI drivers θα πέρναγα αυτό http://www.adaptec.com/en-US/speed/software_pc/aspi/aspi_471a2_exe.htm Αδερφι, τελικα ουτε data dual layer μπορεσα να γραψω, να και το μηνυμα λαθους: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.13 Internal Version: 6, 6, 0, 13c (Nero Express) Recorder: <Optiarc DVD RW AD-7173A> Version: 1-01 - HA 0 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <Optiarc DVD RW AD-7173A >Version: 1-01 - HA 0 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : Optiarc DVD RW AD-7173A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800JD-00LSA0 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === Optiarc DVD RW AD-7173A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2096364kB) Free physical memory: 1514MB (1551328kB) Memory in use : 25 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.4.2007 ISO compilation 10:11:44 PM #1 Text 0 File Isodoc.cpp, Line 6194 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:11:44 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:11:44 PM #3 Text 0 File Writer.cpp, Line 122 Writer Optiarc DVD RW AD-7173A running 10:11:44 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 10:11:45 PM #5 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 10:11:45 PM #6 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 4046927 (899:19.02, 7904MB) 10:11:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 10:11:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: Optiarc DVD RW AD-7173A, Media type: DVD+R9 Double Layer Disc Manufacturer ID: CMC MAG, Media Type ID: D04, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 10:11:45 PM #9 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:11:45 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 4046928 (4046928) = #4046928/899:19.3 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4046928 blocks [Optiarc DVD RW AD-7173A] -------------------------------------------------------------- 10:11:45 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Optiarc DVD RW AD-7173A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8288108544, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 4046928 | lead-out | 1 | 0x41 | 0x00 10:11:45 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:11:45 PM #13 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 10:11:45 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:11:45 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 10:11:45 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:11:45 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 430 Disc finalized, LBA total Image size: 4046928 (7904MB), Last LBA L0: 2023471 (3952MB) 10:12:11 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03956200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 10:12:11 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 519 L0 Data Zone Capacity set to 2023472 (1EE030h, 3952MB) -> OK, confirmed setting 10:12:11 PM #20 CDR -1205 File DVDPlusDualLayer.cpp, Line 544 Burning Layer 1 10:12:11 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 552 Start writing layer 1 at address 0 (0h) 10:12:11 PM #22 Text 0 File Cdrdrv.cpp, Line 8438 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 44 30 34 00 40 ...CMC.MAG.D04.@ 25 25 37 0E 02 20 64 02 - 20 64 18 16 09 08 12 13 %%7...d..d...... 01 01 01 20 00 18 16 09 - 08 12 13 01 01 01 20 00 ................ 10:12:11 PM #23 Text 0 File DVDPlusRW.cpp, Line 652 Start write address at LBA 0 DVD high compatibility mode: Yes 10:16:33 PM #24 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03400000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x08 0x0B 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 10:16:33 PM #25 CDR -1135 File Writer.cpp, Line 311 Write error 10:16:33 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:16:33 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:16:33 PM #28 SCSI -1135 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 10:16:33 PM #29 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 10:16:33 PM #30 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 10:16:33 PM #31 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 10:16:33 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 1:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) αυριο θα δοκιμασω αλλη μαρκα DVD και βλεπουμε....
ppetr Δημοσ. 11 Απριλίου 2007 Δημοσ. 11 Απριλίου 2007 Απλά data dvd γράφεις? Δοκίμασε κάθε συσκευή με φρέσκο format και minimum προγράμματα (μόνο nero). Η έκδοση 6.6.0.13 υποστηρίζει το 7173? Δοκίμασε και την 7.8.5.0
Teirecias Δημοσ. 12 Απριλίου 2007 Μέλος Δημοσ. 12 Απριλίου 2007 Απλά data dvd γράφεις?Δοκίμασε κάθε συσκευή με φρέσκο format και minimum προγράμματα (μόνο nero). Η έκδοση 6.6.0.13 υποστηρίζει το 7173? Δοκίμασε και την 7.8.5.0 Απλο Data DVD και ταινια γραφω. προς στιγμην πριν λιγο νομισα πως το προβλημα μου λυθηκε βαζοντας πανω το παλιο DVD Recorder NEC 3540, αλλα επεσα εξω κι αυτο σταματησε με το ακολουθο μηνυμα: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 μμ Nero API version: 6.6.0.13 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 13c Recorder: <_NEC DVD_RW ND-3540A> Version: 1.01 - HA 0 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === CdRomPeripheral : _NEC DVD_RW ND-3540A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800JD-00LSA0 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-3540A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2096364kB) Free physical memory: 1644MB (1684212kB) Memory in use : 19 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.4.2007 NeroAPI 11:35:51 μμ #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 11:35:51 μμ #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 11:35:51 μμ #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 11:35:51 μμ #4 Text 0 File DVDR.cpp, Line 5976 Book Type counter: 500, Book Type selected in EEPROM, command version 2 11:35:51 μμ #5 Text 0 File DVDR.cpp, Line 5976 Book Type counter: 500, Book Type selected in EEPROM, command version 2 11:35:51 μμ #6 Text 0 File Reader.cpp, Line 127 Reader running 11:35:51 μμ #7 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD_RW ND-3540A running 11:35:51 μμ #8 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 11:35:51 μμ #9 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 11:35:51 μμ #10 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 11:35:51 μμ #11 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 11:35:52 μμ #12 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 4160047 (924:27.22, 8125MB) 11:35:52 μμ #13 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO 11:35:52 μμ #14 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: _NEC DVD_RW ND-3540A, Media type: DVD+R9 Double Layer 11:35:52 μμ #15 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:35:52 μμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 4160048 (4160048) = #4160048/924:27.23 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4160048 blocks [_NEC DVD_RW ND-3540A] -------------------------------------------------------------- 11:35:52 μμ #17 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [_NEC DVD_RW ND-3540A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8519778304, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 4160048 | lead-out | 1 | 0x41 | 0x00 11:35:52 μμ #18 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 11:35:52 μμ #19 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 11:35:52 μμ #20 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 11:35:52 μμ #21 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3.324 KB/s) 11:35:52 μμ #22 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:36:20 μμ #23 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03315E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 11:36:20 μμ #24 Text 0 File DVDPlusDualLayer.cpp, Line 519 L0 Data Zone Capacity set to 2080080 (1FBD50h, 4062MB) -> OK, confirmed setting 11:36:20 μμ #25 CDR -1205 File DVDPlusDualLayer.cpp, Line 544 Burning Layer 1 11:36:20 μμ #26 Text 0 File DVDPlusDualLayer.cpp, Line 552 Start writing layer 1 at address 0 (0h) 11:36:20 μμ #27 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03315E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 11:36:20 μμ #28 Text 0 File DVDR.cpp, Line 5976 Book Type counter: 500, Book Type selected in EEPROM, command version 2 11:36:20 μμ #29 Text 0 File DVDR.cpp, Line 5976 Book Type counter: 500, Book Type selected in EEPROM, command version 2 11:36:20 μμ #30 Text 0 File DVDR.cpp, Line 5976 Book Type counter: 500, Book Type selected in EEPROM, command version 2 11:36:20 μμ #31 Text 0 File DVDR.cpp, Line 5080 Drive: _NEC DVD_RW ND-3540A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 11:36:20 μμ #32 CDR -1211 File DVDR.cpp, Line 4777 Book Type set to: DVD-ROM 11:36:20 μμ #33 Text 0 File DVDPlusRW.cpp, Line 652 Start write address at LBA 0 DVD high compatibility mode: Yes 11:55:39 μμ #34 SCSI -1093 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x00D00000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x1C 0x4B 0x40 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x00 11:55:39 μμ #35 CDR -1093 File Writer.cpp, Line 311 No seek complete 11:55:39 μμ #36 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:55:39 μμ #37 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:55:40 μμ #38 SCSI -1135 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 11:55:40 μμ #39 SCSI -1176 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 11:55:40 μμ #40 Phase 127 File APIProgress.cpp, Line 276 Generating DVD high compatibility borders 11:55:40 μμ #41 Phase 129 File APIProgress.cpp, Line 276 Generating DVD borders completed successfully 11:55:40 μμ #42 Text 0 File DVDR.cpp, Line 5976 Book Type counter: 500, Book Type selected in RAM, command version 2 11:55:40 μμ #43 Text 0 File DVDR.cpp, Line 5976 Book Type counter: 500, Book Type selected in RAM, command version 2 11:55:40 μμ #44 Text 0 File DVDR.cpp, Line 5080 Drive: _NEC DVD_RW ND-3540A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 11:55:40 μμ #45 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3.324 KB/s) 11:55:40 μμ #46 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 11:55:40 μμ #47 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. 11:55:44 μμ #48 Text 0 File DVDR.cpp, Line 5976 Book Type counter: 500, Book Type selected in RAM, command version 2 11:55:44 μμ #49 Text 0 File DVDR.cpp, Line 5976 Book Type counter: 500, Book Type selected in RAM, command version 2 Existing drivers: File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 23/3/2006 5:15:58 μμ (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 23/3/2006 5:15:56 μμ (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 23/3/2006 5:00:28 μμ (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) παντως παρατηρησα το εξης: το μεν 7173 προσπαθησε να γραψει το Dual Layer με την maximum ταχυτητα 8Χ ενω το 3540 εγραφε με την ταχυτητα που εδινε το μεσο (DataWrite DVD+R 2.4X speed)2.4X θα δοκιμασω, οπως ειπα αυριο με αλλα DVD(αλλη μαρκα) και τα ξαναλεμε. αλλα παρ'ολ' αυτα παλι σταματησε.
Teirecias Δημοσ. 12 Απριλίου 2007 Μέλος Δημοσ. 12 Απριλίου 2007 Απλά data dvd γράφεις?Δοκίμασε κάθε συσκευή με φρέσκο format και minimum προγράμματα (μόνο nero). Η έκδοση 6.6.0.13 υποστηρίζει το 7173? Δοκίμασε και την 7.8.5.0 Λοιπον Αδερφι, εβαλα χτες την εκδοση 7.8.5.0 και ενω μου εγραψε και τα 2 layers οταν πηγε να κανει το lead out σταματησε και μου δωσε το παρακατω: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 14/3/2007 9:43:16 μμ NT-SPTI used Nero API version: 7.8.5.0 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 8, 5, 0 Recorder: <_NEC DVD_RW ND-3540A> Version: 1.01 - HA 1 TA 0 - 7.8.5.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : _NEC DVD_RW ND-3540A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800JD-00LSA0 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD_RW ND-3540A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096364kB) Free physical memory: 1648MB (1687900kB) Memory in use : 19 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.4.2007 NeroAPI 11:10:35 πμ #1 Phase 112 File APIProgress.cpp, Line 285 DVD-Video files reallocation started 11:10:35 πμ #2 Phase 114 File APIProgress.cpp, Line 285 DVD-Video files reallocation completed (no file modified) 11:10:35 πμ #3 Phase 111 File APIProgress.cpp, Line 285 DVD-Video files sorted 11:10:35 πμ #4 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:10:35 πμ #5 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 11:10:35 πμ #6 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 11:10:35 πμ #7 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 11:10:35 πμ #8 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 11:10:35 πμ #9 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 4160047 (924:27.22, 8125MB) 11:10:35 πμ #10 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO 11:10:35 πμ #11 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: _NEC DVD_RW ND-3540A, Media type: DVD+R9 Double Layer 11:10:35 πμ #12 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:10:35 πμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 4160048 (4160048) = #4160048/924:27.23 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4160048 blocks [D: _NEC DVD_RW ND-3540A] -------------------------------------------------------------- 11:10:35 πμ #14 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: _NEC DVD_RW ND-3540A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8519778304, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 4160048 | 0 | 0x00 4160048 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 11:10:35 πμ #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:10:35 πμ #16 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-No, small files-Yes (<32KB) 11:10:35 πμ #17 Phase 24 File APIProgress.cpp, Line 285 Caching of files started 11:10:35 πμ #18 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 11:10:35 πμ #19 Phase 25 File APIProgress.cpp, Line 285 Caching of files completed 11:10:35 πμ #20 Phase 36 File APIProgress.cpp, Line 285 Burn process started at 2.4x (3.324 KB/s) 11:10:35 πμ #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:10:59 πμ #22 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x032db780: Len x804 11:10:59 πμ #23 Text 0 File DVDPlusDualLayer.cpp, Line 642 L0 Data Zone Capacity set to 2080096 (1FBD60h, 4062MB) -> OK, confirmed setting 11:10:59 πμ #24 CDR -1205 File DVDPlusDualLayer.cpp, Line 669 Burning Layer 1 11:10:59 πμ #25 Text 0 File DVDPlusDualLayer.cpp, Line 679 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 11:10:59 πμ #26 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x032db840: Len x804 11:10:59 πμ #27 Text 0 File DVDR.cpp, Line 6659 Drive: _NEC DVD_RW ND-3540A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 11:10:59 πμ #28 CDR -1211 File DVDR.cpp, Line 6332 Book Type set to: DVD-ROM 11:10:59 πμ #29 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 11:10:59 πμ #30 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 11:31:52 πμ #31 CDR -1206 File DVDPlusDualLayer.cpp, Line 1958 Burning Layer 2 11:31:52 πμ #32 Text 0 File DVDPlusDualLayer.cpp, Line 1969 Perform layer 1 to 2 jump before writing at address 2080096 (1FBD60h) 11:53:11 πμ #33 Text 0 File WriterStatus.cpp, Line 113 <D: _NEC DVD_RW ND-3540A> start writing Lead-Out at LBA 4160048 (3F7A30h), length 0 blocks 11:54:01 πμ #34 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 4160048 11:54:01 πμ #35 Text 0 File DVDR.cpp, Line 6659 Drive: _NEC DVD_RW ND-3540A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 11:54:01 πμ #36 CDR -1093 File ThreadedTransferInterface.cpp, Line 1893 No seek complete D: _NEC DVD_RW ND-3540A 11:54:01 πμ #37 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1893 Could not perform end of Disc-at-once 11:54:01 πμ #38 Phase 127 File APIProgress.cpp, Line 285 Generating DVD high compatibility borders 11:54:23 πμ #39 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 0 11:54:23 πμ #40 Text 0 File DVDR.cpp, Line 6659 Drive: _NEC DVD_RW ND-3540A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 11:54:23 πμ #41 CDR -1135 File WriterStatus.cpp, Line 162 Write error D: _NEC DVD_RW ND-3540A 11:54:23 πμ #42 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 11:54:24 πμ #43 Phase 38 File APIProgress.cpp, Line 285 Burn process failed at 2.4x (3.324 KB/s) 11:54:24 πμ #44 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 11:54:24 πμ #45 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 11:54:24 πμ #46 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:54:26 πμ #47 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 11:54:26 πμ #48 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\InCDfs.SYS': Ver=5, 5, 1, 23, size=118064 bytes, created 13/3/2007 4:53:50 πμ (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 5, 1, 23, size=37040 bytes, created 13/3/2007 4:54:00 πμ (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 5, 1, 23, size=16304 bytes, created 13/3/2007 4:54:00 πμ (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) δεν αντεχω αλλο ! θα το σπασω !!!!! :mad: :mad:
Teirecias Δημοσ. 12 Απριλίου 2007 Μέλος Δημοσ. 12 Απριλίου 2007 Αδερφια μου, ΘΕΛΩ ΝΑ ΣΑΣ ΖΗΤΗΣΩ ΤΑΠΕΙΝΑ ΜΙΑ ΤΕΡΑΣΤΙΑ ΣΥΓΝΩΜΗ Τελικα ολα οφειλονταν στα κ...DataWrite DVD(ηταν και printable.....τρομαρα τους!!!) μολις εβαλα Verbatim-TDK ολα λυθηκαν ως δια μαγειας ! Ως εν τουτου το θεμα θεωρειται.... ΛΥΣΑΞΑΝ !!! Ηθικον Διδαγμα: Μακρια απο DataWrite DVD(εφ' οσον εχετε Nec DVD Recorders....τουλαχιστον.)
BalDwin Δημοσ. 12 Απριλίου 2007 Δημοσ. 12 Απριλίου 2007 Την μυρίστηκα ρε φίλε,γιατί έχει ξαναγίνει με διάφορες *&%$^ παρτίδες (όχι απαραίτητα της μάρκας που χρησιμοποίησες εσύ).
gfilippas Δημοσ. 12 Απριλίου 2007 Δημοσ. 12 Απριλίου 2007 Όπως πάντα. Πίσω από περίπλοκα προβλήματα βρίσκεται μια γελοία αιτία.
Προτεινόμενες αναρτήσεις
Αρχειοθετημένο
Αυτό το θέμα έχει αρχειοθετηθεί και είναι κλειστό για περαιτέρω απαντήσεις.