Οδηγός για το Sagem F@st 800

[danaos]

Επειδή πολύς κόσμος έχει ταλαιπωρηθεί και πολλοί το μόνο που είχαν να πουν ήταν "πέτα το είναι άχρηστο", αν θέλετε ακολουθήστε τις παρακάτω οδηγίες που οδηγούν σε 100% λειτουργία του Sagem F@st 800 DSL usb modem. Δεν είναι δικής μου επινόησης, κυκλοφορεί σε σχετικά linux forums...

Καλή Επιτυχία!!

 

Instructions:

 

Step 1: Make sure you have the following installed: "kernel-source" "make" "gcc" before continuing

Step 2: Get ueagle 1.3, uncompress it, cd into the folder

Step 3: Type "make" but NOT "make install"

Step 4: Type "cp ueagle-atm.ko usbatm.ko /lib/modules/`uname -r`/kernel/drivers/usb/atm/" replacing 'uname -r' with your kernel version

Step 5: Type "mkdir /lib/firmware/ueagle-atm"

Step 5: Get "ueagle-data-1.1.tar.gz", uncompress it, cd into the folder

Step 6: Type "cp -a * /lib/firmware/ueagle-atm/"

 

Step 7: Type "gedit /etc/ppp/peers/ueagle-atm"

 

Copy in the following:

user "[email protected]"

plugin pppoatm.so VPI.VCI

noipdefault

usepeerdns

defaultroute

persist

noauth

 

Change the "[email protected]" to your ADSL username

Change VPI.VCI to your broadband companies values (check here: http://faq.eagle-usb.org/wakka.php?wiki=ListConfigADSL)

For example Tiscali UK is 0.38

 

Step 8: Type "gedit /etc/ppp/chap-secrets", Replace anything in there with the following line:

"[email protected]" "*" "password"

This being your ADSL username and pass obviously

 

Step 9: Open up YaST -> Network Devices -> DSL

Step 10: Click "Add"

- leave PPP over ATM

- VPI/VIC should have the same value as you enetered for "plugin pppoatm.so VPI.VCI"

- Set Device Activation to 'At Boot Time'

- Tick User Controlled

- Click Next, click New, enter a Provider Name (not important) and your ADSL user and pass, untick 'Always ask for password'

- Click Next

- OK & exit YaST

 

Step 11: Now reboot, when you start up, your connection should already be on, try a web browser smile.gif