Epson Stylus 740 ---Problima!

[anarmostos]

Exo ena Epson Stylus 740 color ligo parapano apo ton ena xrono. kamia fora otan ektipono mpou parousiazi konta, mesa i pano sta grammata mikres koukides melaniou. Auto de simbainei se oli ti selida alla se ena dio xaraktiristika simia tis, px se olo to meso tis selidas. Kai otan tipono se ipsili analysi grammata to problima iparxi. Sta egxroma den paratiro tipota. Oute me head cleaning oute me ti xrisi kanenos allou tropou diothonetai. An omos ektiposo 20 - 30 selides auto stamataei. Meta apo kamia eikosaria selides omos ksanaemfanizetai. Ti mpori na einai? Thanks.

[Kmour]

Ti malania xrisimopieis?<BR>Mipos ton exis konta sto kalorifer?(reystotita?)<BR>(exi profanos kapio problima me kapia trixa? poy kratai melani sto aspromayro kai isos na dimioyrgi to problima)

[sakis]

1. Μην κάνεις πάνω από μία (1) φορά post για το ίδιο πράγμα.<BR>Διάβαστε εδώ <A HREF="http://www.insomnia.gr/cpubb/Forum1/HTML/001143.html" TARGET=_blank>http://www.insomnia.gr/cpubb/Forum1/HTML/001143.html</A> <P><BR>2. Δοκίμασε να αλλάξεις μελάνι.<BR>Αν σου κάνει τα ίδια προβληματα τότε πιθανόν να έχει πιάσει σκόνες η κεφαλή του μαύρου και να θέλει καθάρισμα. Αν δεν έχεις τις γνώσεις μην δοκιμάσεις να την καθαρίσεις.<BR>Μπορείς να το πας σε ένα "σίγουρο" service για να σου πουν πραγματικά ποιό είναι το πρόβλημα και όχι να σου πουν ότι θέλουν π.χ. και οι δύο κεφαλές άλλαγμα!<P> Sakis

[Kmour]

Megali prosoxi omos...An 8a ton pas gia service prosekse!!!Rota prota posa xrimata xriazonte...Exo tin pliroforia pos xriazese tosa xrimata gia service (30000) poy agorazis kenurio ektipoti...<BR>Kostas

[anarmostos]

Kserete kanena site pou na perigrafei pos ginetai o katharismos ton kefalon?

[anarmostos]

Gia katharismo kefalon manually mono stin antiprosopeia mou ipan. Diabasa sto net gia ena kolpo pou xineis ligo oinopneuma stin kefali (ekei pou mpaini to melani)protou baleis to kainourio melani. Aksizei ton kopo na to dokimaso? Please boithia mpas kai glitoso to xaratsi tis antiprosopias..!!!<BR>Thanks.<BR>

[sakis]

Τις περισσότερες φορές το οινόπνευμα καταστρέφει...<P> Sakis

[~JIM~]

Nomizw kikloforoun kati selides poy tis bazeis ston ektypoti sou kai katharizoun tis kefales.Emena nomizw mou eixan dwsei mia tetoia mazi me ton EPSON mou.An den ginei tipota i moni lysi einai i antiprosopia alla prota rotise poso tha kostisei.AAAA kai kati allo na agorazeis aythentika melania kai oxi apomimiseis giati ayto mporei na einai i aitia toy problimatos sou.

[anarmostos]

Akouste ti ekana ebala ligo oinopneyma stin tripa tis kefalis pou mpaini to melani. Ebala to melani kai ekana giro stoys 20 katharismous. Meta ena palio melani to anoiksa kseplina to sfouggaraki tou na figi to ipoloipo melani kai to gemisa me oinopneyma. Ekana kai me ayto to melani allous 15 katharismous. To proi o Epson ektipone san kainourios.!!!!

[Johnnie]

Να και ένας άλλος τρόπος (και διάφορες άλλες συμβουλές) από το <A HREF="http://www.inksupply.com/index.cfm?source=html/concern.html" TARGET=_blank>http://www.inksupply.com/index.cfm?source=html/concern.html</A> <P>The Ultimate Clog Cearing Procedure for the Epson 600<BR>by Steve Schlupsa<BR>The first thing a person should do if they notice a reduction in print quality (white lines or gaps) is to do a nozzle check. This can be found under Printer Utilities. This will show you exactly how many nozzles are not firing, and give you a baseline to check for improvement. Next you should try several cleaning cycles, many times this may get things flowing again. <P>There are 2 reasons for a print head to not give you a perfect nozzle check. The first being an actual clog, and the second being air bubbles, either in the cartridge or the print head. An old cartridge can lead to ink "thickening" and also cause problems. Of course, an empty cartridge will also cause trouble! If you are refilling cartridges and putting less than 7 cc's of ink in an empty chamber, you are not getting a "factory full" refill. This will cause the ink counter to say you still have ink when it's long gone. (see my earlier post on "The Ultimate Refill" method to see how to get "full" refills. <P>OK, let's say you know you have ink, and you've done 4-5 cleaning cycles and still get a bad nozzle check pattern. <P>Step 1:<BR>Distilled water injection into cartridge<P>The first thing to do is try to get rid of an air bubbles. To do this I like to inject 1-2 cc's of distilled water into the color chamber that is giving the bad nozzle check. To do this you will need a syringe and small needle (available at your local vet, or farm supply). Put the print head into the "change cartridge" position and remove the cartridge. Draw 1-2 cc's of distilled water into the syringe and poke the needle into the rear hole on the top of the cartridge. Aim for the middle of the bottom of the cartridge, about 1-1/4" in. (GENTLY...You don't want to pierce the internal filter screen). Now inject the distilled water above where the outlet port would be. Re-install the cartridge and let the printer do it's "new cartridge bogie". Now LET IT SIT for 15-20 minutes! Then run a cleaning cycle and then another nozzle check. Sometimes this is all it takes. The distilled water will also help to thin ink that has become too viscous. I have run tests with ink diluted with as much as 50% distilled water and could hardly tell the difference, (ink ex tender?? . You may need to run a couple cleaning cycles to get everything flowing again. If this doesn't work, roll up your sleeves and proceed to STEP 2. <P>Step 2:<BR>Distilled water injection into print head<P>Still clogged? Don't despair. Put the print head back into "cartridge change" position and remove the offending cartridge. Remove the needle from the syringe and draw 1cc of distilled water. Do you see the little pointed nipple that is in the hole where you pulled the cartridge from? This is the post that breaks the seal of a fresh cartridge and feeds ink to the print head. Place the plastic tip of the syringe firmly over the post. (gently...if you break the post you're screwed). Slowly inject the distilled water into the post and remove syringe. Hopefully you just injected the distilled water into the print head, where it will displace any air bubbles and dissolve dried up ink deposits (kind a like fuel injector cleaner on a car). Let the printer sit for a good couple hours after this. The distilled water needs time to work it's magic. Then reinstall cartridge and test as above. If you STILL have a problem after several cleaning cycles, it's time to get serious and remove the print head completely (STEP 3). This is not for the faint of heart and is reserved for more "technically inclined" users (it's really not that bad...I can have it out in 2-3 minutes). It may help to take a photo or video "before" shot to help you put it back together right! <P>Step 3:<BR>Removal and cleaning of print head<P><BR>1: Move print head to "change cartridge" position and remove cartridges.<P>2: LEAVE POWER SWITCH ON AND UNPLUG PRINTER CORD. This will keep the print head where we want it.<P>3: Remove top cover of printer (4 screws2 in front, 2 in back).<P>4: Carefully remove ribbon cable going into top of print head assembly.<P>5: Remove screw holding the metal arm at the bottom of the cartridge holder, remove metal arm. <P>6: There is a small plastic tab in front of where the ribbon cable plugs in, this is all that is left holding the print head.<P>7: Lift the tab over the protrusion of the print head and slide the print head assembly forward and up to remove.<P>Scary, huh? It's easier than it sounds. Now that you have that bugger out, it's time for a serious distilled water soak. Put enough distilled water into a cup to cover the whole thing (don't worry, it won't hurt anything). Now let it sit overnight. The distilled water will work it's way in and do wonders while you sleep. The next morning, rinse the assembly with clean distilled water, shake off excess and let dry. Now we're ready for the real "nozzle test"! Get a foot of small bore plastic tubing that will fit onto the plastic tip of the syringe. I use a 1/16" I.D. tube that I soften with a lighter and widen the opening with a Bic pen so that it will slip onto the syringe. Now draw in 5-6 cc's of distilled water through the tubing into the syringe. Place the open end of the tubing over the feed post of the clogged color. now firmly inject the distilled water. If the head is clear, you will see 32 (color) or 64 (black) very, very fine streams of distilled water spraying out of the nozzle plate on the bottom of the print head. If some are crooked or not spraying, we need to back flush that color. VERY GENTLY clamp the print head (bottom side-nozzle plate- up) into a small vise or holding fixture of some kind. You will need both hands free. Now take your distilled water -syringe-tube combo and hold the tubing firmly over the micro-sized nozzle holes on the nozzle plate (a magnifying glass will help). While holding the tube firmly in place, force some distilled water into the nozzle holes (you know it's going in if it drips out the feed post). Keep moving and repeat until you go over ALL the nozzle holes. What this is doing is back flushing each jet in the print head and dislodging any foreign objects (dust, etc...) out of the print head. If a head has a rock in the pipes (dust, etc..) and you only flush from the top...you're just pushing it to the spray nozzle and it's still gonna be clogged. A back flush like this is the only way to clear this type of clog, unless you replace the print head. Now you can slap it back together, run a couple cleaning cycles, and get back to printing. <P>I have not met a clog that I couldn't clear with the above methods. I recently had a 500 in the shop that someone had let the black run bone dry. 4 WEEKS LATER, they installed a new cartridge and ......"chaaaaaa.....know what???? unhunh!!!" Clog city. No amount of cleaning cycles or distilled water injection would clear that gooed up print head. EVERY SINGLE NOZZLE WAS CLOGGED. This was a candidate for the old Epson "replace the print head" routine. So I figured, what the hell! Let's pull the print head and test the "procedure". After a "Step 3" full boogie removal and back flush, I ran ONE cleaning cycle and......PERFECT. <P>Remember, this head was so clogged that I couldn't get even 1 nozzle to spray! I know it's kind a involved, but for us techies out there or for a printer out of warranty......it's the only way to go. Feel free to post questions to the Epson-Inkjet list or e-mail me direct. Good Luck!<P>Steve Chlupsa<BR>"The Mad Bomber" of Refilling<BR>e-mail [email protected]<P><BR>Addendum: <BR>Added by Jim Liddil on the Epson-Inkjet list.<P>For just such an occurrence keep a clean empty cartridge on hand. Fill it with distilled water. Use a syringe and make sure it is full. Easy to do since you won't get ink everywhere. Put this cartridge in place of the other one. Let is sit and run cleaning cycles. You can let it go overnight if you have patience. If this fails then you can try the approach of putting a piece of tubing on a syringe that is just big enough to fit snug on the post where the cartridge plugs in. Then GENTLY try to force water or 70% isopropyl alcohol through the head. Put the water cartridge back in and run cleaning cycles. If all this fails it's time to send it to Epson or pull the heads yourself and clean them. My techniques are slight modifications of those presented by Steve Chlupsa.<P><BR>[This message has been edited by johnnie (edited 13-01-2001).]<p>[This message has been edited by johnnie (edited 13-01-2001).]