Προς το περιεχόμενο

Mortal Kombat Mugen


john2gr

Προτεινόμενες αναρτήσεις

Δημοσ.

Νέες πίστες,νέοι χαρακτήρες και νέα fatalities. Ακόμα δεν είναι τέλειο αλλά μετράει άσχημα. Επίσης δεν χρειάζεσαι emulator για να το χαρείς πλέον το Mortal Kombat :D. Επίσης :

 

A little tweaking of the MUGEN.CFG file ;) (can be found in the data folder)

 

--------------------------------------------------------------

[Video Win]

;Enter the width and height of the resolution you want to set here.

;The optimal resolution is 320x240, but if your video card has problems

;You may want to try 640x480.

 

 

Width =1280

Height =960

;This is the color depth at which to run MUGEN. You should set it to

;16 bit color unless your video card has problems with it.

;16-fastest, 24,32-slower, 8-slowest/worst

Depth =32

;Set this parameter to 0 to disable screen stretching, and set it to 1 if

;you want to scale it up to fit the current resolution.

Stretch =1

;Set this parameter to use a resolution-doubling filter. You will

;need a fast machine to use these filters. You will need to increase

;the screen resolution to at least 640x480 for these modes.

;0 - off

;1 - diagonal edge detection

;2 - bilinear filtering

;3 - horizontal scanlines

DoubleRes =1

;DirectX mode

;Hardware and Software run in full-screen. Windowed and Overlay

;run in a window. The windowed modes require you to set Depth to

;whatever color depth you are using for you desktop. The best results

;are when you run in 16-bit color. There is no advantage to running

;in 32-bit color. If Hardware, Software and Windowed fail, try Safe.

;None uses GDI to draw, so it's very slow. Use None only if

;you cannot get anything else to work.

;Overlay is not supported by all video cards, but can be faster than

;Windowed if it works.

DXmode =Hardware

;safe

;Set to 1 to enable vertical retrace synchronization. Do not enable

;if BlitMode = PageFlip.

VRetrace =0

;Drawing mode

;Choose from Normal and PageFlip

BlitMode =normal

--------------------------------------------------------------------

 

Also if it doesn't start and it crashes,just put compatibility mode to Windows 2000 (right click to the MKP.exe -> Properties -> Compatibility) :)

  • 1 μήνα μετά...
  • 1 μήνα μετά...

Αρχειοθετημένο

Αυτό το θέμα έχει αρχειοθετηθεί και είναι κλειστό για περαιτέρω απαντήσεις.

  • Δημιουργία νέου...