A3TeRnuS Δημοσ. 24 Απριλίου 2006 Δημοσ. 24 Απριλίου 2006 Προσπαθησα ηδη δυο φορες να γραψω ενα DVD+R TDK 8x και δεν τα καταφερα... Ποσταρω το log μηπως και καποιος μπορεσει και βγαλει καμμια ακρη... 1C82-0010-8011-0000-3369-7110-4363 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/25/2005 8:11:20 PM NT-SPTI used Nero Version: 7.0.0.0 Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : Generic DVD-ROM 1.0 DaemonDr Port 0 ID 0 DMA: Off DiskPeripheral : ST360021A nvatabus Port 1 ID 0 DMA: Off DiskPeripheral : WDC WD1000BB-00CAA1 nvatabus Port 1 ID 1 DMA: Off CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B nvatabus Port 1 ID 2 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4081B M: CDRom0 Generic DVD-ROM O: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 44MB (45260kB) Memory in use : 91 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.4.2006 ISO compilation 8:10:14 PM #1 Text 0 File Isodoc.cpp, Line 6410 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:10:14 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 8:10:14 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 8:10:14 PM #4 Text 0 File Writer.cpp, Line 113 Writer M: HL-DT-ST DVDRAM GSA-4081B running 8:10:14 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 8:10:14 PM #6 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 8:10:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2246943 (499:19.18, 4388MB) 8:10:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD DVD) 8:10:14 PM #9 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD+R Disc Manufacturer ID: TDK, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 8:10:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:10:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2246944 (2246944) = #2246944/499:19.19 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2246944 blocks [M: HL-DT-ST DVDRAM GSA-4081B] -------------------------------------------------------------- 8:10:14 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [M: HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4601741312, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2246944 | lead-out | 1 | 0x41 | 0x00 8:10:14 PM #13 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:10:14 PM #14 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 8:10:20 PM #15 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 8:10:20 PM #16 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 8:10:20 PM #17 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 4x (5,540 KB/s) 8:10:20 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:10:21 PM #19 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: TDK..... Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 54 44 4B 00 00 - 00 00 00 30 30 32 00 38 ...TDK.....002.8 23 54 37 12 02 42 72 02 - 94 69 15 15 0B 0B 08 08 #T7..Br.”i...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 8:10:21 PM #20 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 8:10:46 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 02 60 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 10 35 2D 03 0E 0C Buffer x05570000: Len x10000 0x3A 59 91 58 EC 18 57 71 63 7E FB EA 26 B5 58 B3 0x23 DE ED 3D 21 70 E5 46 E4 D2 D2 57 79 48 F0 71 0xCD C9 3C 92 40 E8 33 2E EF B4 86 40 1C D1 00 92 8:10:46 PM #22 CDR -1135 File Writer.cpp, Line 302 Write error M: HL-DT-ST DVDRAM GSA-4081B 8:10:46 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:10:46 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:10:47 PM #25 SPTI -1135 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 35 2D 03 0E 0C 8:10:47 PM #26 Phase 127 File dlgbrnst.cpp, Line 1724 Generating DVD high compatibility borders 8:10:47 PM #27 Phase 129 File dlgbrnst.cpp, Line 1724 Generating DVD borders completed successfully 8:10:47 PM #28 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/20/2004 9:37:14 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 1, size=101760 bytes, created 9/25/2005 8:11:20 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Περιμενω καμμια απαντηση... Ελπιζω να μην απεκτησα ξαφνικα hardware προβλημα... Ν.
sa1901 Δημοσ. 25 Απριλίου 2006 Δημοσ. 25 Απριλίου 2006 Το βασικότερο πρόβλημα που βλέπω είναι αυτό === Scsi-Device-Map === CdRomPeripheral : Generic DVD-ROM 1.0 DaemonDr Port 0 ID 0 DMA: Off DiskPeripheral : ST360021A nvatabus Port 1 ID 0 DMA: Off DiskPeripheral : WDC WD1000BB-00CAA1 nvatabus Port 1 ID 1 DMA: Off CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B nvatabus Port 1 ID 2 DMA: Off Ενεργοποίησε το DMA για όλες τις συσκευές σου μέσα από τον Device Manager. Επίσης Nero Version: 7.0.0.0 Βάλε την τελευταία έκδοση του Nero 7. Eίναι η 7.0.8.2
A3TeRnuS Δημοσ. 27 Απριλίου 2006 Μέλος Δημοσ. 27 Απριλίου 2006 Το βασικότερο πρόβλημα που βλέπω είναι αυτό === Scsi-Device-Map === CdRomPeripheral : Generic DVD-ROM 1.0 DaemonDr Port 0 ID 0 DMA: Off DiskPeripheral : ST360021A nvatabus Port 1 ID 0 DMA: Off DiskPeripheral : WDC WD1000BB-00CAA1 nvatabus Port 1 ID 1 DMA: Off CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B nvatabus Port 1 ID 2 DMA: Off Ενεργοποίησε το DMA για όλες τις συσκευές σου μέσα από τον Device Manager. Επίσης Nero Version: 7.0.0.0 Βάλε την τελευταία έκδοση του Nero 7. Eίναι η 7.0.8.2 Καλησπερα και ευχαριστω που απαντησες! Καταρχην,μενω εκπληκτος μιας και το Device Manager δινει και για τους δυο δισκους 'Ultra DMA 5 - Ultra 100' ενω για το LG DRD RAM δινει 'Ultra DMA 2 - Ultra 33' ! Το ξανακοιταξα λοιπον ΚΑΙ στο BIOS και εκει τα ιδια... Απο κει και περα,θα κοιταξω και την αναβαθμιση του ΝΕRO και θα δω τι αποτελεσμα θα χει... Θα ποσταρω αποτελεσματα... Ν.
mikeluckyluke Δημοσ. 27 Απριλίου 2006 Δημοσ. 27 Απριλίου 2006 Μου είχε παρουσιαστεί ένα παρόμοιο πρόβλημα και μώλις έβαλα τα τελευταία drivers "GSA-4081A104_ew_" λύθηκε.
A3TeRnuS Δημοσ. 28 Απριλίου 2006 Μέλος Δημοσ. 28 Απριλίου 2006 Μου είχε παρουσιαστεί ένα παρόμοιο πρόβλημα και μώλις έβαλα τα τελευταία drivers "GSA-4081A104_ew_" λύθηκε. Kαλησπερα...καταρχην ευχαριστω που απαντησες. Αυτο το οποιο εγκατεστησες ειναι Firmware Update και μαλιστα παλιο,μιας που εχει βγει και το Α106 ηδη! Απο κει και περα,εγκατεστησα τους MS IDE Drivers και πλεον ολοι οι δισκοι και το LG ειναι DMA ON τοσο στον Device Manager οσο και στο NERO Log! Dυστυχως,το προβλημα παραμενει και το νεο log ειναι το ακολουθο... ****-****-****-0000-****-****-**** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/25/2005 8:11:20 PM NT-SPTI used Nero Version: 7.0.0.0 Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A106 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : ST360021A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1000BB-00CAA1 atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 DaemonDr Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4081B S: CDRom0 Generic DVD-ROM T: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (83886080) Byte ShowDrvBufStat : 1 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 13MB (13708kB) Memory in use : 97 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.4.2006 ISO compilation 3:59:58 PM #1 Text 0 File Isodoc.cpp, Line 6410 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 3:59:58 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 3:59:58 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 3:59:58 PM #4 Text 0 File Writer.cpp, Line 113 Writer S: HL-DT-ST DVDRAM GSA-4081B running 3:59:58 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 3:59:58 PM #6 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 3:59:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 522703 (116:09.28, 1020MB) 3:59:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD DVD) 3:59:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD+R Disc Manufacturer ID: TDK, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 3:59:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:59:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 522704 (522704) = #522704/116:9.29 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 522704 blocks [s: HL-DT-ST DVDRAM GSA-4081B] -------------------------------------------------------------- 3:59:58 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [s: HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1070497792, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 522704 | lead-out | 1 | 0x41 | 0x00 3:59:58 PM #13 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:59:58 PM #14 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 3:59:59 PM #15 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 3:59:59 PM #16 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 3:59:59 PM #17 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 8x (11,080 KB/s) 3:59:59 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:59:59 PM #19 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: TDK..... Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 54 44 4B 00 00 - 00 00 00 30 30 32 00 38 ...TDK.....002.8 23 54 37 12 02 42 72 02 - 94 69 15 15 0B 0B 08 08 #T7..Br.”i...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 3:59:59 PM #20 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 4:00:29 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 02 60 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 10 35 2D 03 0E 0C Buffer x03ce0000: Len x10000 0x00 00 01 BA 44 00 2D 89 4C 55 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 C8 3C 89 BE 27 B1 B0 1A 23 0xF3 18 70 B6 11 01 05 0A 0F 0B 3E 23 1A C2 8F 15 4:00:29 PM #22 CDR -1135 File Writer.cpp, Line 302 Write error S: HL-DT-ST DVDRAM GSA-4081B 4:00:29 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:00:29 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 4:00:29 PM #25 SPTI -1135 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 35 2D 03 0E 0C 4:00:29 PM #26 Phase 127 File dlgbrnst.cpp, Line 1724 Generating DVD high compatibility borders 4:00:29 PM #27 Phase 129 File dlgbrnst.cpp, Line 1724 Generating DVD borders completed successfully 4:00:29 PM #28 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/20/2004 9:37:14 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 1, size=101760 bytes, created 9/25/2005 8:11:20 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Καμμια ιδεα; Αρχιζει και μου την δινει... Το προβλημα εμφανιστηκε εν μια νυκτι ξαφνικοτατα! Ν.
sa1901 Δημοσ. 28 Απριλίου 2006 Δημοσ. 28 Απριλίου 2006 Για δοκίμασε να αλλάξεις και IDE καλώδιο. Βάλε ένα καινούριο, αχρησιμοποίητο...
A3TeRnuS Δημοσ. 1 Μαΐου 2006 Μέλος Δημοσ. 1 Μαΐου 2006 Aλλαξα και υπολογιστη φιλε μου και δεν ειδα φως... Καιρος να αγορασω ενα νεο Drive να τελειωνω... Ν.
Προτεινόμενες αναρτήσεις
Αρχειοθετημένο
Αυτό το θέμα έχει αρχειοθετηθεί και είναι κλειστό για περαιτέρω απαντήσεις.