SSS787878 Δημοσ. 3 Απριλίου 2006 Δημοσ. 3 Απριλίου 2006 λοιπον συμβαινει το εξης ενω μου γραφει κανονικα τα dvd αντιμετωπιζω προβλημα με τα cd και πιο συγκεκριμενα μου γραφει ενα κανονικα, μου καιει ενα! κυριολεκτικα με παει 1-1! εχω δοκιμασει διαφορετικα cd εχω βαλει το "dvd που καθαριζει τις κεφαλες, εχω κανει αναβαθμιση του firmwire αλλα τιποτα,συγκεκριμενα στα cd που μου καταστεφει γραφει το log file τα εξης: could not perfom fixation ή πιο αναλυτικα: 9:43:36 μμ #2 Phase 90 File dlgbrnst.cpp, Line 1855 Buffer Underrun Protection activated 9:43:36 μμ #3 Text 0 File Reader.cpp, Line 126 Reader running 9:43:36 μμ #4 Text 0 File Writer.cpp, Line 124 Writer _NEC DVD_RW ND-2500A running 9:43:36 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:43:36 μμ #6 Text 0 File Burncd.cpp, Line 3152 Turn on Track-at-once, using CD-R/RW media 9:43:36 μμ #7 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 337942 ( 75:07.67) 9:43:36 μμ #8 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 9:43:36 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: _NEC DVD_RW ND-2500A; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 9:43:36 μμ #10 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:43:36 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 337943 (337943) = #337943/75:5.68 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 337941 blocks [_NEC DVD_RW ND-2500A ] -------------------------------------------------------------- 9:43:36 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [_NEC DVD_RW ND-2500A ] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 692414464, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 337943 | lead-out | 1 | 0x00 | 0x41 9:43:36 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030 Removed 2 run-out blocks from end of track 1. Length: 337943 -> 337941. 9:43:36 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 9:43:36 μμ #15 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 9:43:36 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 9:43:36 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 24x (3.600 KB/s) 9:43:36 μμ #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:43:36 μμ #19 Text 0 File Mmc.cpp, Line 20660 Set BUFE: supported -> ON 9:47:38 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 9:47:42 μμ #21 Text 0 File Mmc.cpp, Line 15480 <_NEC DVD_RW ND-2500A > start Close Session 9:48:11 μμ #22 SCSI -1135 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x05 0x28 0x17 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 9:48:11 μμ #23 CDR -1135 File ThreadedTransferInterface.cpp, Line 1183 Write error 9:48:11 μμ #24 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1183 Could not perform Fixation 9:48:11 μμ #25 Text 0 File Mmc.cpp, Line 15480 <_NEC DVD_RW ND-2500A > start Close Session 9:48:42 μμ #26 SCSI -1135 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x05 0x28 0x17 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 9:48:42 μμ #27 CDR -1135 File ThreadedTransferInterface.cpp, Line 1183 Write error 9:48:42 μμ #28 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1183 Could not perform Fixation 9:48:42 μμ #29 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 9:48:42 μμ #30 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 24x (3.600 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 26/10/2005 11:12:48 μμ (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 5:59:44 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
SSS787878 Δημοσ. 6 Απριλίου 2006 Μέλος Δημοσ. 6 Απριλίου 2006 κανεις δεν ξερει? ή κανεις δεν εχει αντιμετωπισει παρομοιο προβλημα? σηκωνει τιποτα να κανω ή να το κανω φρισμπυ?
sa1901 Δημοσ. 6 Απριλίου 2006 Δημοσ. 6 Απριλίου 2006 Από το log που παραθέτεις, τα σχόλια που μπορώ να κάνω είναι: 1. Να επιλέγεις στην εγγραφή DAO (Disk At Once), αντί για TAO (Track At Once). 2. Δοκίμασε και άλλη μάρκα δισκάκια. Βάλε κομμάτι του log που λείπει από την αρχή, για να δούμε στοιχεία του hardware και του software.
SSS787878 Δημοσ. 6 Απριλίου 2006 Μέλος Δημοσ. 6 Απριλίου 2006 οπως εχω αναφερει, εχω ηδη δοκιμασει και με αλλα cd, να σημειωσω οτι μεχρι να παρουσιασει το προβλημα ειχα γραψει απειρα απο τα ιδια cd(philips cd-r) χωρις το παραμικρο προβλημα, δεν ειχα χασει ουτε ενα! τωρα οσον αφορα το disc at once θα το δοκιμασω, ευχαριστω παντως και παραθετω ξανα ολοκληρο το log αυτη την φορα: SPYROS 1A23-0006-8030-1579-6312-3262 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'D:\PROGRAMS FILES\NERO\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/7/2004 6:33:44 μμ Nero version: 6.3.1.25 (Nero Express) Recorder: <_NEC DVD_RW ND-2500A> Version: 1.0A - HA 1 TA 1 - 6.3.1.25 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD-ROM DDU1611 >Version: GYS1 - HA 1 TA 0 - 6.3.1.25 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800BB-00JHA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3160023A atapi Port 0 ID 1 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1611 atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SONY DVD-ROM DDU1611 F: CDRom0 _NEC DVD_RW ND-2500A G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523744kB) Free physical memory: 134MB (137232kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.4.2006 CD-ROM (ISO) 9:43:36 μμ #1 Text 0 File Isodoc.cpp, Line 6083 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:43:36 μμ #2 Phase 90 File dlgbrnst.cpp, Line 1855 Buffer Underrun Protection activated 9:43:36 μμ #3 Text 0 File Reader.cpp, Line 126 Reader running 9:43:36 μμ #4 Text 0 File Writer.cpp, Line 124 Writer _NEC DVD_RW ND-2500A running 9:43:36 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:43:36 μμ #6 Text 0 File Burncd.cpp, Line 3152 Turn on Track-at-once, using CD-R/RW media 9:43:36 μμ #7 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 337942 ( 75:07.67) 9:43:36 μμ #8 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 9:43:36 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: _NEC DVD_RW ND-2500A; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 9:43:36 μμ #10 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:43:36 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 337943 (337943) = #337943/75:5.68 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 337941 blocks [_NEC DVD_RW ND-2500A ] -------------------------------------------------------------- 9:43:36 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [_NEC DVD_RW ND-2500A ] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 692414464, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 337943 | lead-out | 1 | 0x00 | 0x41 9:43:36 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030 Removed 2 run-out blocks from end of track 1. Length: 337943 -> 337941. 9:43:36 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 9:43:36 μμ #15 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 9:43:36 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 9:43:36 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 24x (3.600 KB/s) 9:43:36 μμ #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:43:36 μμ #19 Text 0 File Mmc.cpp, Line 20660 Set BUFE: supported -> ON 9:47:38 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 9:47:42 μμ #21 Text 0 File Mmc.cpp, Line 15480 <_NEC DVD_RW ND-2500A > start Close Session 9:48:11 μμ #22 SCSI -1135 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x05 0x28 0x17 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 9:48:11 μμ #23 CDR -1135 File ThreadedTransferInterface.cpp, Line 1183 Write error 9:48:11 μμ #24 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1183 Could not perform Fixation 9:48:11 μμ #25 Text 0 File Mmc.cpp, Line 15480 <_NEC DVD_RW ND-2500A > start Close Session 9:48:42 μμ #26 SCSI -1135 File Cdrdrv.cpp, Line 1191 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x05 0x28 0x17 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 9:48:42 μμ #27 CDR -1135 File ThreadedTransferInterface.cpp, Line 1183 Write error 9:48:42 μμ #28 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1183 Could not perform Fixation 9:48:42 μμ #29 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 9:48:42 μμ #30 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 24x (3.600 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 26/10/2005 11:12:48 μμ (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 5:59:44 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
sa1901 Δημοσ. 6 Απριλίου 2006 Δημοσ. 6 Απριλίου 2006 Έγινε τίποτα με το DAO; Nero version: 6.3.1.25 Για δοκίμασε με το τελευταίο Nero. ftp://ftp.ahead.de/Nero-6.6.1.4_no_yt.exe Αν δεν γίνει τίποτα, μπορεί να ήρθε ο καιρός για καινούριο recorder...
aledjo Δημοσ. 7 Απριλίου 2006 Δημοσ. 7 Απριλίου 2006 gia dokimase na allakseis firmware... kai go to idio exo kai mou exei bgei skyli! http://www.micheldeboer.nl/firmware/25x0.html
gv Δημοσ. 7 Απριλίου 2006 Δημοσ. 7 Απριλίου 2006 valto se ena allo pc ... an sou kanei ta idia ... alla3e to ... APLO !!!
SSS787878 Δημοσ. 9 Απριλίου 2006 Μέλος Δημοσ. 9 Απριλίου 2006 το αξιοπεριεργο ειναι οτι κανει ζημια μονο στο cd και οχι στα dvd και μαλιστα με ρυθμο 1 προς 1! η καλυτερη λυση ειναι να το δοκιμαζα αλλου αλλα δυστυχως δεν μπορω, τουλαχιστον τωρα,
Προτεινόμενες αναρτήσεις
Αρχειοθετημένο
Αυτό το θέμα έχει αρχειοθετηθεί και είναι κλειστό για περαιτέρω απαντήσεις.