Ασυρματο δικτυο σε slackware 10.2

Dimmu_Borgir · 24 Ιανουαρίου 2006

Λοιπον, εχουμε στην εστια ενα ασυρματο δικτυο το οποιο εχει τα εξης χαρακτιριστικα:

>Network Authentication: Open
Data Encryption: WEP
The key is provided automatically
EAP Type: PEAP (Peotected EAP) και γινεται χρηση ενος certificate (citacs.cer) και authentication model: Secured password (EAP-MSCHAP v2)

Η ασυρματη καρτα ειναι της broadcom και δουλευει με ndiswrapper

Τωρα εκανα compile το wpa_supplicant με τις εξης επιλογες:

>CONFIG_IEEE8021X_EAPOL=y
CONFIG_EAP_MD5=y
CONFIG_EAP_MSCHAPV2=y
CONFIG_EAP_TLS=y
CONFIG_EAP_PEAP=y
CONFIG_EAP_TTLS=y
CONFIG_EAP_GTC=y
CONFIG_EAP_OTP=y
CONFIG_EAP_SIM=y
CONFIG_EAP_AKA=y
CONFIG_EAP_PSK=y
CONFIG_EAP_PAX=y
CONFIG_EAP_LEAP=y
CONFIG_DRIVER_NDISWRAPPER=y

Το wpa_supplicant.conf ειναι:

>ctrl_interface=/var/run/wpa_supplicant

network={
ssid="SSID-WAP-WAccess-CALCOURT"
key_mgmt=IEEE8021X
eap=PEAP
phase2="auth=MSCHAPV2"
identity="gkyril10"
password="********"
ca_cert="/etc/cert/citacs.pem"
}

το citacs.pem το δημιουργησα ως εξης:

>openssl x509 -in citacs.cer -inform d -out citacs.pem

To output του wpa_supplicant ειναι το εξης (wpa_supplicant -d -c/etc/wpa_supplicant.conf -iwlan0 -w):

>root@blashyrkh:~/compiles/gemtek_wlan_v3_100_46_0_wxp# wpa_supplicant -d -c/etc/wpa_supplicant.conf -iwlan0 -w
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Priority group 0
  id=0 ssid='SSID-WAP-WAccess-CALCOURT'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=19 WE(source)=18 enc_capa=0xf
 capabilities: key_mgmt 0xf enc 0xf
Own MAC address: 00:14:a5:04:7c:10
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
Setting scan request: 0 sec 100000 usec
Added interface wlan0
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Wireless event: cmd=0x8b06 len=8
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b1a len=8
Scan timeout - try to get results
Received 308 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0d:29:ac:d8:0c ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
  skip - no WPA/RSN IE
1: 00:0d:29:ac:d7:ac ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
  skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 535 bytes of scan results (3 BSSes)
Scan results: 3
Selecting BSS from priority group 0
0: 00:0d:29:ac:d8:0c ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
  skip - no WPA/RSN IE
1: 00:0d:29:ac:d7:ac ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
  skip - no WPA/RSN IE
2: 00:0c:41:9d:b1:66 ssid='Blacktower' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
  skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 529 bytes of scan results (3 BSSes)
Scan results: 3
Selecting BSS from priority group 0
0: 00:0d:29:ac:d8:0c ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
  skip - no WPA/RSN IE
1: 02:13:ce:00:00:72 ssid='HOME' wpa_ie_len=0 rsn_ie_len=0 caps=0x12
  skip - no WPA/RSN IE
2: 00:0d:29:ac:d7:ac ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
  skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 529 bytes of scan results (3 BSSes)
Scan results: 3
Selecting BSS from priority group 0
0: 00:0d:29:ac:d8:0c ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
  skip - no WPA/RSN IE
1: 00:0d:29:ac:d7:ac ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
  skip - no WPA/RSN IE
2: 02:13:ce:00:00:72 ssid='HOME' wpa_ie_len=0 rsn_ie_len=0 caps=0x12
  skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 529 bytes of scan results (3 BSSes)
Scan results: 3
Selecting BSS from priority group 0
0: 00:0d:29:ac:d8:0c ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
  skip - no WPA/RSN IE
1: 00:0d:29:ac:d7:ac ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
  skip - no WPA/RSN IE
2: 02:13:ce:00:00:72 ssid='HOME' wpa_ie_len=0 rsn_ie_len=0 caps=0x12
  skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
No keys have been configured - skip key clearing
Cancelling scan request

IP παιρνω με DHCP.

Και το ερωτημα μου τωρα: τι δεν κανω σωστα για να πραγματοποιησω την συνδεση;

Σύνδεση

Ασυρματο δικτυο σε slackware 10.2

Προτεινόμενες αναρτήσεις

Dimmu_Borgir

Αρχειοθετημένο

Σύνδεση